NEON Move EX-1 Electric Bicycle User Manual

1. Introducció

This manual provides essential instructions for the assembly, operation, and maintenance of your NEON Move EX-1 Electric Bicycle. Please read this manual thoroughly before using your electric bicycle to ensure safe and optimal performance. Keep this manual for future reference.

Figure 1: NEON Move EX-1 Electric Bicycle

2. Pautes de seguretat

• Porteu sempre casc i equip de seguretat adequat quan conduïu.
• Familiaritzeu-vos amb les lleis i regulacions de trànsit locals.
• Feu una inspecció prèvia a la conducció abans de cada ús, comprovant els frens, els pneumàtics i el nivell de la bateria.
• Do not operate the electric bicycle under the influence of alcohol or drugs.
• Eviteu conduir en condicions meteorològiques adverses o sobre superfícies relliscoses.
• Ensure all connections and fasteners are secure before riding.

3. Muntatge i muntatge

Your NEON Move EX-1 Electric Bicycle requires assembly. Follow these steps carefully. It is recommended to have a second person assist with some steps.

3.1. Included Parts

• Motorcycle structure
• Cistella
• Wheel disc
• Respatller de seient
• Pedal kit
• Fangs
• Carregador
• Miralls
• Roda davantera
• Llum frontal
• Basket support
• Seient
• Battery cables and accessories

3.2. Eines necessàries

• Clau Allen
• Spanish wrench
• Clau hexagonal de 10 mm
• Clau ajustable
• Alicates
• Tornavís Phillips
• Tornavís elèctric (opcional)

3.3. Guia de vídeo de muntatge

Watch the official assembly video for a visual step-by-step guide:

3.4. Instruccions de muntatge pas a pas

1. Mount the Front Wheel: Remove the bolt and nuts from the front fork. Attach the wheel disc to the front wheel. Position the wheel and insert the bearing between the wheel and the tubular part. Use a screwdriver to open the tubular part if needed. Reinsert the bolt and secure with nuts on both sides using the 10mm hexagonal wrench.
2. Instal·leu el manillar: Insert the handlebar into the designated hole until it stops. Screw in the central bolt and tighten with the Allen key. Align the handlebar and secure the four remaining bolts with the same key.
3. Attach the Dashboard: Position the dashboard, insert its two screws, and secure them with an electric screwdriver or Phillips screwdriver.
4. Install the Basket Support: Unscrew the two front bolts and position the basket base. Align it and reinsert the same bolts to secure it. Use an electric screwdriver or Phillips screwdriver and a 10mm Spanish wrench for tightening.
5. Connect the Headlight Wires: Identify the two large connectors that connect to the headlight. IMPORTANT: Do NOT connect the yellow/black wire or the two additional wires coming from the dashboard. Connecting these could cause a short circuit or malfunction.
6. Attach the Headlight: Align the headlight and secure it from the back with four screws using an electric screwdriver or Phillips screwdriver.
7. Instal·leu els intermitents: Simply insert the turn signals into their respective holes without needing tools.
8. Install Reflectors: Screw the reflectors into their designated positions on the front fork.
9. Attach Front Mudguard: Remove the indicated screws. Position the front mudguard, insert the central screw, and secure with an electric screwdriver. Align the lower supports and secure them with the previously removed screws.
10. Install Pedals (Optional): If you wish to install the pedals, cut the cap on the side of the battery compartment. Remove the cover and loosen the moldings. Remove the inner screws with a screwdriver. Loosen the rear wheel using the adjustable wrench, Spanish wrench, and Allen key. Take the pedal kit, insert the shaft, and place the bearings on both ends, screwing them firmly. Mount the sprocket on the shaft and secure the corresponding bolt. Place the chain, adjusting the teeth to the rear wheel sprocket and aligning with the pedal sprocket. Join both ends of the chain. Tighten the rear wheel bolts. Re-screw all moldings and replace the cover.
11. Connecteu les bateries: Remove the battery box and unscrew the bolts to open it. Using the special screws provided, connect the red cables: red pole to blue pole, red pole to blue pole, and finally, the last red cable from red pole to blue pole. Ensure no cable ends touch other poles during connection to avoid short circuits. Tighten all pole screws. Connect the black cable to the remaining red pole and the red cable with the integrated fuse to the remaining blue pole. Secure them. Close the battery box, secure its screws, and place it back into the electric bicycle. Plug in the connector for the batteries to charge and replace the top cover. Turn on the electric bicycle.
12. Instal·leu el seient: Take the three screws, align the seat pieces, and secure them firmly by hand. No tools are needed for this step.
13. Instal·leu el respatller: Traieu el seient. WARNING: Do NOT move or manipulate any connections under the seat, as they are factory configured and tampering may affect performance. Remove the three screws with an electric screwdriver or Phillips screwdriver. Place the backrest and reinsert the screws, securing them firmly. Replace the seat.
14. Attach Rear Mudguard: Remove the screws from the sides and place the rear mudguard. Position it correctly and align the lower supports.
15. Install Mirrors: Loosen the nut, insert the mirror, and rotate it to the desired adjustment. Re-tighten the nut to secure.
16. Ajustar els frens: For the rear brake, remove the bolt and the spring from the cable. Use a screwdriver to create a small space between the rear wheel and the metal piece to insert the cable. Place the spring on the cable, insert it through the marked hole, and secure it with its nut. Remove the screwdriver and press the brake lever to verify adjustment. Repeat the same process for the front brake.
17. Attach Brand Plate: Align the brand plate on the basket and secure it with two screws using a screwdriver.
18. Install Cable Cover: Place the handlebar cable cover, align it to cover the screws and cable exits, and secure it with the screw and an electric screwdriver.

4. Instruccions de funcionament

Your NEON Move EX-1 Electric Bicycle offers both pedal and electric modes for versatile travel.

4.1. Controls i pantalla

• Pantalla LCD: The integrated LCD screen shows speed, battery level, and light indicators.
• Accelerador: Located on the handlebar for electric propulsion.
• Controls de llum: Operate the front light and turn signals.
• Trompa: Use for signaling other road users.
• Frens: Drum brakes for reliable stopping power.

Figure 2: Handlebar Controls

4.2. Starting and Riding

1. Introduïu la clau al contacte i gireu-la a la posició "ON".
2. The LCD display will illuminate, showing battery status and speed.
3. To engage electric mode, gently twist the accelerator.
4. To use pedal assist, simply start pedaling. The motor will provide assistance.
5. Use the brake levers to slow down or stop.

4.3. Alarma antirobatori

The electric bicycle is equipped with an anti-theft alarm system. Activate it using the remote control. The alarm will trigger if the bicycle is moved or started without the keys.

Figure 3: Keys and Remote Control

5. Manteniment

Un manteniment regular garanteix la longevitat i el funcionament segur de la teva bicicleta elèctrica.

• Cura de la bateria: Charge the battery fully after each use. Avoid completely draining the battery. Charging time is approximately 7-9 hours.
• Pressió dels pneumàtics: Comproveu i manteniu regularment la pressió recomanada dels pneumàtics per a un rendiment i una seguretat òptims.
• Inspecció de frens: Periodically inspect brake pads and cables for wear and proper function. Adjust as needed.
• Neteja: Clean the electric bicycle with a damp drap. Eviteu utilitzar dolls d'aigua a alta pressió directament sobre els components elèctrics.
• Elements de fixació: Check all bolts and nuts regularly to ensure they are tight and secure.

Figura 4: Compartiment de la bateria

6. Solució De Problemes

If you encounter any issues, refer to this basic troubleshooting guide. For complex problems, contact customer support.

• Bicycle not turning on: Check if the battery is properly connected and charged. Ensure the key is fully inserted and turned to the 'ON' position.
• El motor no ajuda: Verify the battery charge. Ensure the accelerator is functioning correctly. If pedals are installed, check the chain tension and alignment.
• Frens no efectius: Inspect brake cables for tension and wear. Check brake pads for wear. Adjust as per assembly instructions.
• L'alarma sona inesperadament: Ensure the remote control is not accidentally pressed. Check for any loose connections or sensors.

7. Especificacions

Detailed technical specifications for the NEON Move EX-1 Electric Bicycle:

Figura 5: Especificacions clau

Figure 6: Dimensions and Capacity

8. Garantia i Suport

Your NEON Move EX-1 Electric Bicycle comes with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or contact NEON customer service.

8.1. Atenció al client

If you have any questions, require technical assistance, or need to claim warranty service, please contact NEON customer support through the contact information provided on your purchase receipt or the official NEON weblloc.