EAZYRC FMS 1/24 FCX24M RC Crawler (Defender90)

1. Acabatview

The EAZYRC FMS 1/24 FCX24M RC Crawler, Defender90 model, is a highly detailed, ready-to-run (RTR) remote-controlled vehicle. This model features an officially authorized rugged appearance, faithfully replicating its Eastnor Yellow paint, intricate interior, and accessories like the roof rack, paying homage to the thrilling spirit of the Camel Trophy. Designed for off-road enthusiasts, it offers a realistic driving experience with advanced features.

Figure 1: EAZYRC FMS 1/24 Land Rover Series RC Crawlers, Camel Trophy Edition, showcasing various models including the Defender90.

2. Què hi ha a la caixa

Your EAZYRC FMS 1/24 FCX24M RC Crawler package includes the following components:

• 1x EAZYRC FMS 1/24 FCX24M RC Crawler (Defender90)
• 1x 2.4Ghz Remote Control
• 1x Lithium Polymer Battery (7.4V, included)
• 1x USB Battery Charger
• 1x Small Screwdriver and spare screws
• Various accessory parts (e.g., R3A Receiver V3, Steering Servo, Oil Shock Absorbers Assembly, 050 Motor Set, Front Axle Assembly, Rear Axle Assembly, Ball Bearing Set)

Figura 2: Explotat view of the FCX24M Chassis components, including the R3A Receiver V3, Steering Servo, Oil Shock Absorbers Assembly, 050 Motor Set, Front Axle Assembly, Rear Axle Assembly, Ball Bearing Set, and LiPo Battery.

3. Configuració

3.1. Càrrega de la bateria del vehicle

1. Locate the 7.4V Lithium Polymer battery and the USB charger.
2. Connecteu la bateria al carregador USB.
3. Plug the USB charger into a compatible USB power source (e.g., computer USB port, USB wall adapter). The charging time is approximately 4-5 hours. The LED indicator on the charger will show charging status (usually red for charging, green for full).
4. Un cop estigui completament carregat, desconnecteu la bateria del carregador.

3.2. Instal·lació de les piles al comandament a distància

1. Locate the battery compartment on the underside of the remote control.
2. Feu servir un tornavís petit per obrir la tapa del compartiment de la bateria.
3. Insert 2x 1.5V AA alkaline non-rechargeable batteries, ensuring correct polarity.
4. Substituïu la tapa del compartiment de la bateria i fixeu-la amb el cargol.

3.3. Installing the Vehicle Battery

1. Open the rear bed of the RC crawler to access the battery compartment.
2. Connect the charged 7.4V LiPo battery to the vehicle's power interface, ensuring a secure connection.
3. Carefully place the battery into the compartment and close the rear bed.

3.4. Binding the Remote Control and Vehicle

The vehicle and remote control are typically pre-bound from the factory. If re-binding is necessary:

1. Ensure both the vehicle and remote control are turned OFF.
2. Turn ON the remote control. The power LED will blink.
3. Turn ON the vehicle. The power LED on the remote control should become solid, indicating a successful bind.
4. If the binding fails, repeat the steps or consult the troubleshooting section.

Figure 3: The 2.4Ghz Remote Control for the FCX24M RC Crawler.

4. Funcionament

4.1. Controls bàsics

• Activador de l'accelerador: Pull the trigger to move forward. Push the trigger away from you to brake, then push again for reverse.
• Volant: Turn the steering wheel left or right to control the vehicle's direction.
• Retall de direcció: Use the steering trim dial on the remote control to adjust the steering so the vehicle drives straight when the steering wheel is centered.

4.2. Two-Speed Transmission

The FCX24M features a two-speed transmission for versatile driving. Refer to your remote control's specific buttons or switches for shifting between high and low gears. Low gear provides more torque for crawling over obstacles, while high gear offers faster speeds for open terrain.

4.3. Sistema d'il·luminació

The vehicle is equipped with brightenable headlights. The lighting can typically be controlled via a switch or button on the remote control. Consult your remote control's manual for specific lighting controls.

4.4. Consells de conducció

• Always operate your RC crawler in a safe and open area, away from people, pets, and obstacles.
• Avoid driving in deep water or extreme mud unless the vehicle is specifically rated for such conditions, as this can damage electronics.
• Practice driving in various terrains to get accustomed to the vehicle's handling characteristics.

5. Manteniment

5.1. Neteja

• After each use, especially in dirty or dusty conditions, clean the vehicle to prevent debris from affecting performance.
• Feu servir un raspall suau o aire comprimit per eliminar la brutícia solta.amp cloth can be used for stubborn grime, but avoid excessive moisture on electronic components.

5.2. Cura de la bateria

• Always fully charge the LiPo battery before use.
• Do not overcharge or completely discharge the battery, as this can reduce its lifespan.
• Emmagatzemeu les bateries en un lloc fresc i sec, lluny de la llum solar directa i de temperatures extremes.
• Traieu les piles del vehicle i del comandament a distància quan no els feu servir durant períodes prolongats.

5.3. Inspecció General

• Regularly inspect all screws, linkages, and moving parts for looseness or damage. Tighten any loose screws.
• Check the tires for wear and tear. Replace if necessary to maintain optimal traction.
• Ensure all wires and connectors are secure and free from damage.

6. Solució De Problemes

7. Especificacions

• Model: Defensor 90
• Dimensions del producte: 9.5 x 4.2 x 5 polzades
• Pes de l'article: 2.29 lliures
• Bateria: 1 Lithium Polymer battery (7.4V, included)
• Edat recomanada: 16 anys i més
• Escala: 1/24
• Condueix: 4 X 4

8. Garantia i assistència

For warranty information, please refer to the documentation included with your purchase or contact the retailer. For technical support, parts, or service inquiries, please contact EAZYRC customer service through their official weblloc web o el venedor on es va comprar el producte.