1. Introducció
The MiBOXER TRI-PW 500W AC Triac Dimmer is designed for precise control of lighting systems in residential and commercial environments. This device integrates WiFi and 2.4GHz technology, allowing for remote operation via compatible applications and MiBOXER remote controls. It supports triac dimming, ensuring compatibility with a wide range of lighting fixtures, including LED, halogen, and incandescent lights, for smooth and consistent dimming from full brightness to a soft glow.
Imatge 1.1: acabatview of the MiBOXER TRI-PW 500W AC Triac Dimmer unit.
2. Informació de seguretat
- Instal·lació elèctrica: La instal·lació l'ha de dur a terme un electricista qualificat d'acord amb els codis i les normatives elèctriques locals.
- Desconnexió d'alimentació: Desconnecteu sempre l'alimentació a l'interruptor automàtic abans d'instal·lar o fer el manteniment del regulador d'intensitat.
- Voltage Compatibilitat: Assegureu-vos que l'entrada voltage matches the dimmer's specifications (100-240V AC).
- Capacitat de càrrega: Do not exceed the maximum load capacity of 500W. Overloading can cause damage or fire.
- Només per a ús interior: This device is intended for indoor use in dry locations. Avoid exposure to moisture or extreme temperatures.
- Compatibilitat: Use only with compatible dimmable lighting fixtures (LED, halogen, incandescent).
3. Contingut del paquet
Verifiqueu que tots els components siguin presents al paquet:
- MiBOXER TRI-PW 500W AC Triac Dimmer Unit
- User Manual (may be included as a separate document)
Image 3.1: MiBOXER TRI-PW Dimmer unit shown with its packaging and a user manual.
4. Característiques del producte
- Powerful 500W Capacity: Supports high-power loads, suitable for various lighting fixtures.
- Triac Dimming Technology: Provides flicker-free dimming for LED, halogen, and incandescent lights.
- WiFi & 2.4GHz Control: Integrates with WiFi and MiBOXER 2.4GHz systems for smartphone or remote control.
- Push Control Compatibility: Allows for quick, on-site dimming adjustments via a push button.
- Control per aplicació i veu: Compatible with major smart home platforms for app-based and voice command control.
- Funció de memòria: Retains previous lighting settings after power cycles.
5. Especificacions
| Característica | Detall |
|---|---|
| Marca | MiBOXER |
| Nom del model | TRI-PW |
| Característica especial | Regulador Triac de 500 W AC |
| Classe de banda de freqüència | Banda única |
| Comunicació sense fils estàndard | 802.11b |
| Dispositius compatibles | Admet la regulació PUSH |
| Usos recomanats | Home lighting systems |
| Tecnologia de connectivitat | Wi-Fi |
| Compatibilitat amb la llar intel·ligent | Smart Home Compatible (e.g., Amazon Alexa, Google Assistant) |
| Cobertura | LED, halogen, incandescent, high-power loads |
| Freqüència | 2.4 GHz |
| Dimensions (aprox.) | 117 mm (L) x 45 mm (A) x 24 mm (Al) |
Image 5.1: Technical drawing showing the approximate dimensions of the TRI-PW dimmer.
Image 5.2: Packaging dimensions for the MiBOXER TRI-PW dimmer.
6. Configuració i instal·lació
Important: Assegureu-vos que l'alimentació estigui desconnectada al disjuntor abans de començar la instal·lació.
Esquema de cablejat
The MiBOXER TRI-PW dimmer supports two primary wiring methods for integration with a push switch. Both methods are suitable for triac dimming LED lights, traditional filament lamps, i halògens lamps.
Image 6.1: Wiring diagrams for connecting the MiBOXER TRI-PW dimmer with a push switch.
Method 1: Single-Wire Push Switch Connection
- Connect the Live (L) and Neutral (N) input wires from your power supply (100-240V~) to the corresponding 'INPUT' terminals on the dimmer.
- Connect the Live (L) and Neutral (N) output wires to your lighting fixture (100-240V~) from the 'OUTPUT' terminals.
- Connect one wire from the push switch to the 'PUSH' terminal on the dimmer.
- Connect the other wire from the push switch to the Live (L) input terminal.
Method 2: Two-Wire Push Switch Connection
- Connect the Live (L) and Neutral (N) input wires from your power supply (100-240V~) to the corresponding 'INPUT' terminals on the dimmer.
- Connect the Live (L) and Neutral (N) output wires to your lighting fixture (100-240V~) from the 'OUTPUT' terminals.
- Connect the two wires from the push switch directly to the 'PUSH' terminals on the dimmer.
After wiring, secure the dimmer in a suitable electrical box or enclosure. Restore power at the circuit breaker.
7. Instruccions de funcionament
7.1. Push Switch Control
- Premsa curta: Turn the lights ON or OFF.
- Premsa llarga: Adjust the brightness level. Release the button to set the desired brightness.
7.2. WiFi App Control
The TRI-PW dimmer supports control via a smart app (e.g., Tuya Smart app). No additional 2.4G gateway is required for app control.
- Download the compatible smart home app from your device's app store.
- Registreu-vos o inicieu sessió al vostre compte.
- Put the dimmer into pairing mode (refer to the app's instructions or the dimmer's specific pairing procedure, usually involving a long press of the 'SET' button or power cycling).
- Follow the in-app instructions to add the device to your network.
- Once connected, you can control the dimmer's ON/OFF state and brightness from your smartphone.
Imatge 7.1: Ex.ample of controlling the dimmer using a smartphone application.
7.3. 2.4GHz Remote Control
The dimmer can be paired with MiBOXER 2.4GHz remote controls for direct wireless control.
- Ensure the dimmer is powered on.
- Refer to your MiBOXER 2.4GHz remote control's manual for specific pairing instructions. Typically, this involves pressing a "Link" or "Pair" button on the remote within a few seconds of powering on the dimmer or pressing the dimmer's 'SET' button.
- A successful pairing is usually indicated by the connected light flashing.
7.4. Control per veu (Alexa/Assistent de Google)
The TRI-PW dimmer is compatible with smart home voice assistants like Amazon Alexa and Google Assistant when integrated through a compatible smart home app.
- Ensure your dimmer is successfully connected to the smart home app (e.g., Tuya Smart).
- Obre l'aplicació Amazon Alexa o Google Home.
- Enable the skill or service for the smart home app you are using (e.g., "Tuya Smart" skill).
- Discover devices. Your dimmer should appear in the list.
- Assign a name to your dimmer (e.g., "Living Room Light").
- You can now control your light using voice commands, such as "Alexa, turn on Living Room Light" or "Hey Google, dim Living Room Light to 50%."
Image 7.2: The dimmer is compatible with voice control platforms like Amazon Alexa and Google Assistant.
8. Manteniment
- Neteja: Disconnect power before cleaning. Wipe the dimmer with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Inspecció: Comproveu periòdicament les connexions del cablejat per comprovar si estan ben ajustades i si hi ha signes de desgast o danys.
- Actualitzacions de firmware: If available, check the smart home app for firmware updates to ensure optimal performance and security.
9. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Els llums no s'encenen. | No power, incorrect wiring, faulty bulb, dimmer not paired. | Check circuit breaker. Verify wiring according to diagrams. Test bulb. Re-pair dimmer with app/remote. |
| Els llums parpellegen o brunzeixen. | Incompatible bulb, overloaded circuit, loose wiring. | Ensure bulbs are dimmable and compatible with triac dimmers. Reduce load. Check wiring connections. |
| Dimmer not responding to app/remote. | Dimmer out of range, WiFi issue, not paired. | Ensure dimmer is within WiFi/2.4GHz range. Check WiFi router. Re-pair dimmer with app/remote. |
| No es pot connectar a la xarxa Wi-Fi. | Incorrect WiFi password, 5GHz network, dimmer not in pairing mode. | Verify WiFi password. Ensure you are connecting to a 2.4GHz network. Put dimmer into WiFi pairing mode. |
10. Garantia i Suport
This MiBOXER TRI-PW dimmer comes with a 2 any de garantia des de la data de compra. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.
The warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or acts of nature.
For technical support or warranty claims, please contact your retailer or the manufacturer directly. Please have your purchase receipt and product model number (TRI-PW) available when contacting support.
Per a més informació, podeu visitar el MiBOXER Store on Amazon.