Manual d'instruccions del gravador làser ATOMSTACK P9 M50

1. Introducció

The ATOMSTACK P9 M50 is a portable and professional laser engraver designed for various materials including wood, leather, metal, and more. This manual provides essential information for safe operation, setup, and maintenance of your device, ensuring optimal performance and longevity.

2. Informació de seguretat

ADVERTIMENT: Laser radiation can cause eye damage and skin burns. Always follow safety guidelines to prevent injury.

• Protecció ocular: The laser module includes a protective cover. While this cover helps, it is highly recommended to wear additional laser safety goggles (not included) during operation to ensure maximum eye protection.
• Parada d'emergència: Familiarize yourself with the emergency stop button. In case of any unexpected situation, press this button immediately to halt all machine operations. Rotate the button to disengage it before restarting.
• Ventilació: Operate the laser engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving and cutting. Consider using an exhaust system.
• Seguretat del material: Do not engrave or cut unknown materials. Some materials can produce toxic fumes or catch fire. Always verify material compatibility and safety data.
• Supervisió: Never leave the machine unattended during operation. Stay within close proximity to monitor the process.
• Nens i animals de companyia: Keep children and pets away from the operating area and the machine at all times.

Figure 2.1: Emergency Stop Button and Control Panel. The red button is the emergency stop, the silver button is On/Off, and the small button is Reset.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents al paquet:

• 1 x ATOMSTACK P9 M50 Laser Engraving Machine
• Parts for screw assembly (steps 2/3/4/5)
• 1 x Anti-dust cloth
• 1 x Tool set
• 1 x Fixed focus film
• 3 x Acrylic panels
• 3 x Wood chips
• 1 x Lector de targetes
• 5 x Brides de cable
• 1 x Accessory package
• 1 x Display assembly
• 1 x Display cable
• 1 x adaptador de corrent
• 1 x cable d'alimentació
• 1 x Cable de dades
• 1 x Metal cutting support plate
• 1 x manual
• 1 x Laser assembly
• 1 x Conjunt de l'eix X
• 1 x Y-axis assembly
• 2 x peus de suport
• 4 x Mounting spacers

4. Guia de configuració

The ATOMSTACK P9 M50 comes 85% pre-assembled, simplifying the setup process. Follow these steps to prepare your engraver for use:

1. Desembalatge: Carefully remove all components from the packaging and place them on a clean, stable surface.
2. Muntatge del marc: Connect the X-axis and Y-axis assemblies as per the included manual's diagrams. Secure them using the provided screws and tools. Ensure all connections are firm.
3. Instal·lació del mòdul làser: Mount the laser assembly onto the X-axis carriage. Ensure it is securely fastened and the cables are properly connected.
4. Peus de suport: Attach the two support feet to the base of the machine for stability.
5. Control Terminal: Connect the independent control terminal to the main unit using the display cable. The terminal features a magnetic adsorption design for easy attachment.
6. Connexió d'alimentació: Connect the power adapter to the machine and then plug it into a suitable power outlet (100-240V AC, 50/60Hz).
7. Connexió de dades: For computer control, connect the machine to your computer using the provided USB data cable. Alternatively, you can use a TF card for offline operation.

Figure 4.1: Assembled ATOMSTACK P9 M50 Laser Engraver.

Figure 4.2: Independent Control Terminal connection.

5. Instruccions de funcionament

5.1 Instal·lació i connexió del programari

The ATOMSTACK P9 M50 is compatible with popular laser engraving software:

• LaserGRBL: Supports Win XP/Win 7/Win 8/XP/Win 10.
• LightBurn: Supports Win XP/Win 7/Win 8/XP/Win 10 and Mac systems.

Download and install your preferred software from the official websites. Connect the engraver to your computer via USB. Follow the software's instructions to establish a connection and begin your projects.

Figure 5.1: Software Compatibility and Connection.

5.2 Gravat fora de línia

The P9 M50 supports offline engraving via its independent control terminal and TF card, allowing operation without a continuous computer connection.

1. Prepara el teu gravat file (NC, BMP, JPG, PNG, DXF) using your chosen software.
2. Guarda el file to a TF card.
3. Insert the TF card into the slot on the control terminal.
4. Use the terminal's interface to select and start your engraving project.

Figure 5.2: Independent Control Terminal for Offline Engraving.

5.3 Fixed Focus Laser

The P9 M50 features a fixed-focus laser, eliminating the need for manual focus adjustment. This design ensures consistent precision and high energy density for both engraving and cutting tasks.

Figure 5.3: Fixed Focus Laser Technology.

5.4 Materials suportats

The ATOMSTACK P9 M50 can engrave and cut a wide range of materials:

Figure 5.4: Dual Compression Spot Coupling Technology for Cutting.

6. Manteniment

Regular maintenance ensures optimal performance and extends the lifespan of your ATOMSTACK P9 M50. Perform these tasks periodically:

• Netegeu la lent del làser: Periodically clean the laser lens with a soft, lint-free cloth and a specialized lens cleaning solution to maintain engraving precision and laser power.
• Clean the Work Area: Remove debris, dust, and residue from the engraving area after each use to prevent interference with the laser path and machine movement.
• Lubricar les peces mòbils: Apply a small amount of appropriate lubricant to the guide rails and lead screws as needed to ensure smooth and precise operation of the machine's axes.
• Inspeccionar els cables: Regularly check all power and data cables for signs of wear, fraying, or damage. Replace any damaged cables immediately to prevent electrical hazards.

7. Solució De Problemes

This section addresses common issues you might encounter with your ATOMSTACK P9 M50.

8. Especificacions

Detailed technical specifications for the ATOMSTACK P9 M50 Laser Engraver:

Figura 8.1: Dimensions del producte i especificacions clau.

9. Garantia i Suport

For warranty information and technical support, please refer to the official ATOMSTACK weblloc web o contacteu amb el vostre distribuïdor. Conserveu el rebut de compra com a comprovant de compra.

Recursos en línia:

• Visit the official ATOMSTACK store on Amazon: Botiga oficial d'ATOMSTACK
• For software support, visit the official webllocs de LaserGRBL i LightBurn.