Introducció
Gràcies per la compraasing the THOMSON QY-BG002 BB83944 Wall Art Wireless Bluetooth Speaker. This device combines aesthetic wall art with a high-quality wireless audio experience. This manual provides essential information for the safe and efficient use of your speaker, including setup, operation, maintenance, and troubleshooting.
Informació de seguretat
- No exposeu l'altaveu a l'aigua, la humitat ni a temperatures extremes.
- Eviteu deixar caure o sotmetre l'altaveu a forts impactes.
- No intenteu desmuntar, reparar o modificar l'altaveu vosaltres mateixos. Poseu-vos en contacte amb personal de servei qualificat per obtenir ajuda.
- Feu servir només el cable de càrrega proporcionat o un equivalent certificat.
- Mantingueu l'altaveu allunyat de fonts de calor i flames obertes.
- Assegureu-vos que hi hagi una ventilació adequada quan feu servir l'altaveu.
Contingut del paquet
Si us plau, comproveu que tots els articles estiguin presents al vostre paquet:
- THOMSON QY-BG002 BB83944 Wall Art Wireless Bluetooth Speaker
- Cable de càrrega USB tipus C
- Manual d'usuari (aquest document)
- Maquinari de muntatge (cargols, ancoratges de paret)
Producte acabatview
Familiarize yourself with the components and controls of your speaker.
Figura 1: Davant view del parlant, espectacleasing the wall art design.
Figura 2: lateral view of the speaker, highlighting its slim design.
Figura 3: Enrere view of the speaker, indicating the location of the power button and USB-C charging port.
Configuració
1. Carregant l’altaveu
Before initial use, fully charge the speaker. Connect the provided USB Type-C cable to the charging port on the back of the speaker and the other end to a USB power adapter (not included) or a computer's USB port. The charging indicator light will illuminate during charging and turn off when fully charged. A full charge takes approximately 3-4 hours.
2. Muntatge de l'altaveu
The speaker is designed for wall mounting. Use the included mounting hardware for secure installation.
- Choose a suitable location on a wall, ensuring it is structurally sound to support the speaker's weight.
- Mark the positions for the mounting screws using the speaker's rear mounting points as a guide.
- Drill pilot holes at the marked positions. Insert wall anchors if necessary for drywall or plaster.
- Secure the mounting screws into the wall, leaving a small gap for the speaker to hang.
- Carefully align the speaker's mounting slots with the screws and slide it down to secure it in place.
Figura 4: Detail of the speaker's mounting bracket for wall installation.
Figura 5: Corner detail of the speaker, illustrating the frame and a mounting point.
Instruccions de funcionament
1. Encendre/apagar
Press and hold the power button located on the back of the speaker for approximately 3 seconds to turn it on or off. A voice prompt or indicator light will confirm the status.
2. Bluetooth Pairing (Single Speaker)
- Engegueu l'altaveu. Entrarà automàticament en mode d'emparellament Bluetooth, cosa que s'indicarà amb un llum LED intermitent.
- Al dispositiu amb Bluetooth (telèfon intel·ligent, tauleta, ordinador portàtil), activeu el Bluetooth i cerqueu els dispositius disponibles.
- Select "THOMSON QY-BG002" from the list of devices.
- Once paired, the speaker will confirm with a voice prompt, and the LED light will stop flashing.
3. True Wireless Stereo (TWS) Pairing (Two Speakers)
To achieve a stereo sound experience, you can pair two THOMSON QY-BG002 speakers together.
- Ensure both speakers are charged and powered on.
- Do not connect either speaker to your Bluetooth device yet.
- On one speaker (this will be the primary speaker), double-press the power button. It will enter TWS pairing mode.
- The two speakers will automatically search for and connect to each other. A voice prompt will confirm successful TWS pairing.
- Once TWS paired, connect your Bluetooth device to the primary speaker as described in "Bluetooth Pairing (Single Speaker)" above. The primary speaker will then transmit audio to both speakers for stereo sound.
4. Reproducció d'àudio
After successful Bluetooth pairing, play audio from your connected device. The sound will be output through the speaker(s).
5. Control de volum
Adjust the volume directly from your connected Bluetooth device. The speaker does not have independent volume controls.
6. Connectivitat USB
The USB Type-C port is primarily for charging. It does not support audio input directly from a USB drive or device for playback.
Manteniment
- Neteja: Feu servir un drap suau i sec per netejar la superfície de l'altaveu. No utilitzeu netejadors abrasius, ceres ni dissolvents.
- Cura de la bateria: Per allargar la durada de la bateria, eviteu descarregar-la completament amb freqüència. Torneu a carregar l'altaveu regularment, fins i tot si no l'utilitzeu durant períodes prolongats.
- Emmagatzematge: When storing the speaker for a long time, ensure it is fully charged and stored in a cool, dry place away from direct sunlight.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| L'altaveu no s'encén. | La bateria està esgotada. | Charge the speaker using the provided USB Type-C cable. |
| No es pot emparellar amb un dispositiu Bluetooth. | Speaker is not in pairing mode; Bluetooth is off on device; device is too far. | Ensure speaker is on and in pairing mode (flashing LED). Turn on Bluetooth on your device. Move device closer to the speaker (within 10 meters). |
| No hi ha so després de l'emparellament. | Volume on device is too low; incorrect audio output selected on device. | Increase volume on your connected device. Ensure the speaker is selected as the audio output on your device. |
| L'emparellament TWS ha fallat. | Speakers were already connected to a device; incorrect TWS pairing procedure. | Ensure both speakers are disconnected from any Bluetooth devices. Follow the TWS pairing steps carefully, double-pressing the power button on one speaker. |
| Mala qualitat de so o connexió intermitent. | Interferència; dispositiu massa lluny; bateria baixa. | Move closer to the speaker. Avoid obstacles between the speaker and device. Charge the speaker. Reduce interference from other wireless devices. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | QY-BG002 BB83944 |
| Audio Material | PVC Plastic + MDF Board |
| Versió Bluetooth | 5.2 |
| Interval Bluetooth | Fins a 10 metres (33 peus) |
| Potència de sortida | 4*10W (Total 40W) |
| Resposta de freqüència | 80Hz-20KHz |
| Tipus de bateria | 18650 d'ions de liti |
| Capacitat de la bateria | 7.4 V 6000 mAh |
| Durada mitjana de la bateria | Aproximadament 10 hores (al 50% del volum) |
| Port de càrrega | USB tipus C |
| Bare Metal Size (L*W*H) | 460mm * 330mm * 47mm (18.11"D x 1.85"W x 13"H) |
| Pes de l'article | 6 lliures |
| Mètode de control | Toca |
| Tipus de muntatge | Muntatge de paret |
Vídeo del producte
Vídeo: Un acabatview of the THOMSON Wall Art Wireless Bluetooth Speaker, demonstrating its features and design.
Garantia i Suport
Informació de la garantia
This THOMSON QY-BG002 BB83944 speaker comes with a Garantia limitada d'1 any from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or external causes.
Atenció al client
For technical assistance, warranty claims, or further inquiries, please refer to the contact information provided with your purchase documentation or visit the official THOMSON support weblloc.