1. Introducció
Welcome to the user manual for your new Bambu Lab P1S 3D Printer. The P1S is a high-performance 3D printer designed for reliability and ease of use, featuring a fully enclosed body that enhances printing performance for advanced filaments. It is engineered for high-temperature printing and offers rapid print speeds without compromising quality.
This manual provides essential information for setting up, operating, maintaining, and troubleshooting your P1S printer to ensure optimal performance and longevity.
Figura 1: Frontal view of the Bambu Lab P1S 3D Printer.
2. Configuració
2.1 Desembalatge i col·locació
Carefully remove the printer from its packaging. Ensure all protective materials and shipping restraints are removed. Place the printer on a stable, level surface with adequate space around it for ventilation and operation. The printer dimensions are approximately 38.9 x 45.8 x 38.9 cm.
Figura 2: Explotat view showing the internal components and enclosure of the P1S.
2.2 Connexió d'alimentació
Connect the power cable to the printer and then to a suitable electrical outlet. The Bambu Lab P1S supports a wide voltage range (Bivolt: 100-240 VCA, 50/60 Hz), making it adaptable to various regions.
2.3 Calibratge inicial
The P1S is designed for immediate use. Upon first power-on, the printer will automatically perform essential calibrations, including automatic bed leveling and vibration compensation. Allow the printer to complete these processes before proceeding.
Figure 3: Close-up of the P1S control panel displaying operational status.
2.4 Càrrega de filaments
Load your chosen filament (e.g., PLA, PETG, TPU, ABS, ASA) into the designated filament holder and feed it into the extruder according to the on-screen instructions. The printer supports 1.75 mm diameter filament.
3. Instruccions de funcionament
3.1 Procés d'impressió bàsic
- Prepare your 3D model: Use compatible slicing software (e.g., Bambu Studio) on your computer (Windows, macOS, Linux) or mobile device (Android, iOS) to prepare your 3D model for printing.
- Send to printer: Transfer the sliced G-code file to the P1S via Wi-Fi or other supported methods.
- Start printing: Seleccioneu el file on the printer's interface and initiate the print. The printer will automatically heat the hotend (up to 300 ℃) and the build plate (up to 100 ℃).
- Supervisar el progrés: Monitor the print progress via the printer's display or connected software.
3.2 Multi-color Printing (Optional)
For multi-color printing capabilities, the Bambu Lab P1S can be optionally paired with the AMS (Automatic Material System). This allows for printing with up to 16 colors when stacking four AMS units, significantly expanding creative possibilities.
3.3 Speed and Quality
The P1S boasts an impressive maximum extruder speed of 500 mm/s and acceleration of 20 m/s². Its advanced control algorithms, including vibration compensation and pressure advance, ensure high-quality prints even at these rapid speeds.
Figure 4: The Bambu Lab P1S 3D Printer ready for operation in a typical workspace.
4. Manteniment
4.1 Neteja de la placa de construcció
Regularly clean the textured PEI build plate with isopropyl alcohol to ensure optimal adhesion and print quality. Avoid abrasive cleaners that could damage the surface.
4.2 Nozzle and Hotend Care
Periodically inspect the stainless steel nozzle for wear or clogs. Refer to the Bambu Lab support resources for detailed instructions on hotend and nozzle replacement or cleaning procedures.
4.3 Manteniment general
Keep the printer's interior and exterior clean from dust and filament debris. Ensure all moving parts are free from obstructions. Do not attempt to lubricate components unless specifically instructed by Bambu Lab documentation.
5. Solució De Problemes
5.1 Problemes d'impressió habituals
- Poor First Layer Adhesion:
Ensure the build plate is clean and free of oils. Re-run bed leveling calibration. Adjust Z-offset if necessary.
- Obstrucció de filaments:
Check for tangled filament on the spool. Verify hotend temperature is appropriate for the filament type. Perform a cold pull or hotend cleaning if a clog is suspected.
- Canvi de capes:
Inspect belts for proper tension. Ensure the printer is on a stable surface. Reduce print speed if printing very fast or with complex geometries.
- Print Quality Issues (e.g., stringing, blobs):
Adjust retraction settings in your slicing software. Ensure filament is dry. Calibrate flow rate for your specific filament.
For more detailed troubleshooting guides and solutions, please visit the official Bambu Lab support weblloc.
6. Especificacions
| Característica | Detall |
|---|---|
| Build Volume (L×P×A) | 256 x 256 x 256 mm |
| Material del broquet | Stainless Steel (0.4 mm included) |
| Hotend Type | Tot de metall |
| Max Hotend Temperature | 300 ℃ |
| Diàmetre del filament | 1.75 mm |
| Filaments compatibles | PLA, PETG, TPU, PVA, PET, ABS, ASA |
| Build Plate Surface | Bambu Textured PEI Plate (included) |
| Temperatura màxima de la placa de construcció | 100 ℃ |
| Max Extruder Speed | 500 mm/s |
| Max Extruder Acceleration | 20 m/s² |
| Physical Dimensions (P1S) | 389 x 389 x 458 mm³ |
| Pes net | 12.95 kg |
| Requisits elèctrics | 100-240 VCA, 50/60 Hz (1000 W @ 220 V, 350 W @ 110 V) |
| Compatibilitat de sistemes operatius | Windows, macOS, Linux, Android, iOS |
| Material | Plàstic i vidre |
7. Garantia i Suport
For warranty information, technical support, and service inquiries, please refer to the official Bambu Lab weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
Recursos en línia: Visit the Bambu Lab official website for FAQs, firmware updates, and community forums.
