Varstrom P860ML E-Bike Display User Manual

Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Varstrom P860ML E-Bike Display. Please read this manual thoroughly before using the product to ensure proper function and safety. The P860ML display is designed for BAFANG electric bike motors utilizing the UART communication protocol (versions 5.0 to 5.8).

Compatibilitat i instal·lació

Compatibilitat

The P860ML e-bike display is specifically designed for BAFANG mid-motors that use the UART communication protocol, versions 5.0 to 5.8. It features a 5-pin female connector for secure attachment. This display is not compatible with CAN protocol systems.

Imatge: This image illustrates the correct 5-pin female UART protocol connector required for the P860ML display, contrasting it with an incompatible CAN protocol connector. Ensure your BAFANG motor uses the UART protocol for proper function.

Instal·lació

The display holder is compatible with handlebar diameters of 22.2 mm, 25.4 mm, and 31.8 mm. Follow these steps for installation:

1. Prepare Handlebar: Choose a suitable position on your e-bike handlebar for the display. Ensure it does not obstruct your view o el control de la bicicleta.
2. Attach Holder: Open the display holder clamp and place it around the handlebar. Use the provided non-slip mats if necessary to ensure a snug fit and prevent rotation.
3. Secure Holder: Tighten the screws on the holder clamp until it is firmly secured to the handlebar. Do not overtighten.
4. Muntar la pantalla: Slide the P860ML display onto the holder until it clicks into place.
5. Connectar el cable: Locate the 5-pin female connector on the display cable and connect it to the corresponding male connector from your BAFANG motor system. Ensure the connection is secure and fully seated.
6. Cables de ruta: Carefully route and secure all cables to prevent them from snagging or interfering with moving parts.

Imatge: This image shows the P860ML display mounted on an e-bike handlebar, illustrating its typical installed position and connection to the control buttons.

Imatge: Un primer pla view of the P860ML display unit along with its remote button, highlighting the 5-pin connector. This shows the components you will be installing.

Característiques i Funcions

The Varstrom P860ML display offers a rich set of features designed to enhance your e-bike riding experience:

• High Contrast IPS Color Screen: Features a 3.5-inch IPS color matrix screen for clear visibility in various lighting conditions.
• Visualització completa de dades: Shows real-time speed (SPEED), average speed (AVG SPD), maximum speed (MAX SPD), odometer (ODO), trip distance, battery status, PAS level, error codes, and riding time.
• Brillantor de la llum de fons ajustable: Customize the backlight brightness with 5 levels to suit your environment, from low light to bright daylight. Includes an auto-sensing light feature.
• Multiple Assist Levels: Supports 3-level, 5-level, or 9-level pedal assist (PAS) modes, with UBE optional, allowing for fine-tuned power delivery.
• Interfície multilingüe: Supports German, French, English, Italian, Spanish, and Czech languages. English is the default, with easy switching.
• Port de càrrega USB: Equipped with a 5V/500mA USB port for convenient emergency charging of mobile devices.
• Intelligent Battery Indicator: Provides a reliable and accurate display of your e-bike’s battery charge level.
• 6 km/h Walk Mode: A dedicated function for easy maneuvering of the e-bike while walking alongside it.
• Construcció duradora: Encased in ABS+PC material with an IP65 water resistance rating, ensuring reliability in wet conditions.
• Ergonomic External Button Design: Easy to operate controls for intuitive interaction.
• Rellotge: Built-in battery keeps the time even when the display is off.
• Tolerància a la temperatura: Suitable for low temperatures, down to -20℃.

Imatge: This diagram labels the various indicators and sections of the P860ML display, including time, battery, speed, power, ODO, and maintenance indicators.

Imatge: This image demonstrates the multilingual capabilities of the P860ML display, showing options for English, German, French, Italian, Spanish, and Czech languages.

Imatge: This visual explains how to adjust the backlight brightness of the P860ML display for optimal visibility during both day and night riding conditions.

Configuració i configuració

The P860ML display allows for various settings adjustments to personalize your riding experience. Access the settings menu using the external buttons.

Accés a la configuració

Typically, a long press of the ‘M’ (Mode) button or a combination of buttons will enter the settings menu. Navigate through options using the ‘+’ and ‘-’ buttons and confirm selections with the ‘M’ button.

Configuració clau

• Idioma: Select your preferred language (German, French, English, Italian, Spanish, Czech). Default is English.
• Sistema: General system settings.
• Brillantor: Adjust the display backlight brightness (5 levels).
• Apagat automàtic: Configure the time after which the display automatically turns off due to inactivity.
• Port USB: Settings related to the USB charging function.
• Rellotge: Estableix l'hora actual.
• Escenes: Potentially allows switching between MODERN and CLASSIC display modes.
• PAS Level Mode: Choose between 0-3, 0-5, or 0-9 assist levels.
• Unitats: Switch between Kilometers (KM) and Miles (MI) for speed and distance display.

Imatge: This image displays the main settings menu of the P860ML, showing options like Language, System, Brightness, Auto Off, USB Port, Clock, and Scenes.

Instruccions de funcionament

Familiarize yourself with the display’s controls for optimal use during your ride.

Operacions bàsiques

• Encès/apagat: Press and hold the power button (usually the ‘M’ button) to turn the display on or off.
• Ajusta el nivell de PAS: Use the ‘+’ and ‘-’ buttons to increase or decrease the pedal assist level. The current PAS level will be shown on the display.
• Control dels fars: Long press the light button (often integrated with the ‘+’ button) to turn the e-bike’s headlight on or off.
• 6 km/h Walk Mode: Long press the ‘-’ button to activate the 6 km/h walk assist mode. The motor will provide low-speed assistance, useful when pushing the bike. Release the button to exit this mode.
• Càrrega USB: Connect your USB device to the USB charging port on the display. This port provides 5V/500mA for emergency charging.
• Information Display Toggle: Short press the ‘M’ button to cycle through different information displays such as ODO, Trip Distance, Riding Time, and Range.

Imatge: This image shows the main operational screen of the P860ML display, indicating where speed, PAS level, battery, and other key riding data are shown.

Manteniment

Proper maintenance ensures the longevity and optimal performance of your P860ML display.

• Neteja: Netegeu la pantalla i el cos amb un drap suau iamp cloth. Do not use abrasive cleaners or solvents. Ensure the USB port cover is closed when not in use to prevent dust and moisture ingress.
• Resistència a l'aigua: The display has an IP65 water resistance rating, meaning it is protected against low-pressure water jets from any direction. Avoid submerging the display in water or exposing it to high-pressure water sprays.
• Emmagatzematge: Quan no la feu servir durant períodes prolongats, guardeu la bicicleta elèctrica i la pantalla en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Inspecció del cable: Periodically check all cables and connectors for any signs of wear, damage, or loose connections. Ensure the 5-pin connector is clean and free of debris.

Resolució de problemes

If you encounter issues with your P860ML display, refer to the following common problems and solutions:

For issues not listed here or if solutions do not resolve the problem, please contact Varstrom customer support.

Especificacions

Imatge: This image provides detailed dimensions of the P860ML display and lists key parameters such as voltage compatibility, holder sizes, speed limit, PAS levels, and USB charging capability.

Garantia i Suport

Informació de la garantia

The Varstrom P860ML display comes with a 30-day return policy and a 365-day repair or replacement warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

Atenció al client

For technical assistance, troubleshooting, or warranty claims, please contact Varstrom customer support through the retailer where you purchased the product or visit the official Varstrom weblloc per obtenir informació de contacte.

When contacting support, please have your product model number (US JJ P860ML-UART Display) and purchase details ready.