Tunze Turbelle NanoStream 6040.005 HUB Edition Instruction Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Tunze Turbelle NanoStream 6040.005 HUB Edition. This high-performance stream pump is designed for aquariums ranging from 20 to 500 liters (5.3 to 132 USgal.), offering adjustable flow rates and smart control capabilities.

The Turbelle NanoStream 6040.005 HUB Edition is equipped with a WIFI/Cloud-based controller (Turbelle Controller 7020) for precise flow management and features a compact design for easy integration into your aquarium.

2. Instruccions de seguretat

Always disconnect the power supply before performing any maintenance or installation work on the pump.
Ensure the power supply unit is placed in a dry area, away from water splashes.
Do not operate the pump if the power cord or any part of the unit is damaged.
This device is intended for indoor use only and for aquariums.
Mantenir fora de l'abast dels nens.
The pump must be fully submerged during operation.

3. Contingut del paquet

Si us plau, comproveu que tots els elements siguin presents al paquet:

Tunze Turbelle NanoStream 6040.005 Pump
Turbelle Controller 7020 (WIFI/Cloud-based)
Power Supply Unit (100-240V / 50-60Hz)
Magnet Holder (for glass thickness up to 12 mm / 1/2”)
Deflector de flux
Manual d'instruccions

4. Configuració i instal·lació

Follow these steps to properly install your Turbelle NanoStream 6040.005 pump:

4.1. Positioning the Pump

Tunze Turbelle NanoStream 6040.005 pump mounted on aquarium glass with magnet holder

Image: The Turbelle NanoStream 6040.005 pump securely mounted to the aquarium glass using its magnet holder.

Tria la ubicació: Select a position in your aquarium where the pump can create optimal water flow without disturbing substrate or corals excessively. Ensure the pump is fully submerged.
Attach Magnet Holder: Place the pump unit inside the aquarium and align the external magnet holder on the outside of the glass. The strong magnets will secure the pump in place. The magnet holder is suitable for glass thicknesses up to 12 mm (1/2 inch).
Ajustar la direcció: The pump's outlet can be rotated to direct the water flow as desired.

4.2. Connexió del controlador

Tunze Turbelle Controller 7020 with various buttons and display for flow control

Image: The Tunze Turbelle Controller 7020, showing its interface for adjusting pump settings and modes.

Connecteu la bomba al controlador: Plug the pump's cable into the designated port on the Turbelle Controller 7020.
Connecteu la font d'alimentació: Plug the power supply unit into the controller, then plug the power supply into a suitable electrical outlet.
Engegada inicial: The pump will perform a brief self-test upon initial power-up.

5. Instruccions de funcionament

The Turbelle NanoStream 6040.005 is controlled via the Turbelle Controller 7020, offering various modes and settings.

5.1. Controlador sobrepassatview

Tunze Turbelle Controller 7020 with buttons for Food Timer, Manual, Cloud, Analog, Mode, Wave Search, Min Power, Pulse Duration, Max Power

Imatge: Detallada view of the Tunze Turbelle Controller 7020, highlighting its control functions.

The controller allows you to adjust flow rate, set wave patterns, and utilize special functions like the food timer.

5.2. Funcionament bàsic

Selecció del mode: Use the "Mode" button to cycle through different operating modes (e.g., Constant, Pulse, Wave).
Ajust de cabal: Use the "+" and "-" buttons to increase or decrease the flow rate in Constant mode, or to adjust pulse intensity/duration in other modes.
Food Timer: Press the "Food Timer" button to temporarily stop the pump for approximately 10 minutes, allowing fish to feed undisturbed. The pump will automatically resume operation after the timer expires.
Wave Search: The "Wave Search" function helps to find the optimal wave frequency for your aquarium.

5.3. WIFI/Cloud Control

The HUB Edition features WIFI/Cloud-based control. Refer to the separate Tunze app manual for detailed instructions on connecting your controller to your home network and managing it remotely via the cloud.

6. Manteniment

Regular maintenance ensures optimal performance and longevity of your Turbelle NanoStream pump.

6.1. Cleaning the Pump

Tunze Turbelle NanoStream 6040.005 pump disassembled for cleaning, showing impeller and housing

Image: The Turbelle NanoStream 6040.005 pump, illustrating its components for easy disassembly and cleaning.

Desconnecteu l'alimentació: Always unplug the pump from the power outlet before cleaning.
Remove from Aquarium: Carefully remove the pump from the aquarium.
Desmuntar: Gently detach the flow deflector and the protective cage. The impeller can then be carefully removed.
Components nets: Use a soft brush and warm water to remove algae, calcium deposits, and other debris from all pump components, especially the impeller and its housing. For stubborn deposits, a mild vinegar solution can be used, followed by thorough rinsing.
Torneu a muntar: Reassemble the pump in reverse order, ensuring all parts are correctly seated.
Freqüència: Clean the pump every 1-3 months, depending on the amount of debris and algae in your aquarium.

6.2. Cable Inspection

Periodically inspect the power cable for any signs of wear, cuts, or damage. If any damage is found, discontinue use immediately and contact Tunze support.

7. Solució De Problemes

Aquests són alguns problemes comuns i les seves solucions:

Problema	Causa possible	Solució
Pump not starting or weak flow.	Sense font d'alimentació. Impeller blocked by debris. Air trapped in the pump. Controller settings too low.	Comproveu les connexions d’alimentació. Disconnect power, remove pump, clean impeller and housing. Gently shake the pump while submerged to release air. Increase flow setting on the controller.
Pump making unusual noise.	Impeller dirty or damaged. Bomba no completament submergida. Vibrations against aquarium glass.	Clean or inspect impeller for damage. Replace if necessary. Ensure pump is fully submerged. Adjust pump position or use the included Silence Clamp (if applicable) to reduce vibrations.
El controlador no respon.	Problema d'alimentació. Mal funcionament del controlador.	Check power connections to the controller. Try resetting the controller by unplugging and replugging the power. If issues persist, contact support.

8. Especificacions

Model	Tunze Turbelle NanoStream 6040.005 HUB Edition
Número de model de l'article (intern)	6095.005
Mida de l'aquari	20 to 500 liters (5.3 to 132 USgal.)
Caudal	Approx. 200 to 4,500 l/h (53 to 1,190 USgal./h)
Consum d'energia	1.5 - 13 W
Unitat d'alimentació	100-240V / 50-60Hz
Longitud del cable	3 m (118")
Dimensions (without flow deflector and Magnet Holder)	60 x 43 x 68 mm (2.36 x 1.69 x 2.68 polzades)
Diàmetre de sortida	ø40 mm (1.57”)
Magnet Holder Glass Thickness	Up to 12 mm (1/2”)
Material	Plàstic
Color	Black/Blue/White
Pes de l'article	2.75 lliures

9. Garantia

The Tunze Turbelle NanoStream 6040.005 HUB Edition comes with a 5 any de garantia from the date of purchase. This warranty covers manufacturing defects and material faults under normal use conditions. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, neglect, or unauthorized modifications.

10. Suport i informació de contacte

For further assistance, technical support, or warranty inquiries, please contact Tunze customer service or visit the official Tunze weblloc.

Assistència en línia: Visit the Tunze Store on Amazon

Si us plau, tingueu a mà el número de model del producte (6040.005) i la data de compra quan us poseu en contacte amb el servei d'assistència.

Tunze 6040.005