NEWFAST AX1800 WiFi 6 Range Extender User Manual

1. Producte acabatview

The NEWFAST AX1800 WiFi 6 Range Extender is designed to expand your existing wireless network coverage, eliminate Wi-Fi dead zones, and provide reliable, high-speed internet access throughout your home or office. Utilizing WiFi 6 (802.11ax) technology, it supports dual-band operation (2.4GHz and 5.8GHz) for optimal performance across various devices.

Imatge 1.1: Frontal view of the NEWFAST AX1800 WiFi 6 Range Extender, showcasinel seu disseny compacte i les seves quatre antenes externes.

Característiques principals:

• AX1800 Dual Band WiFi 6: Supports speeds up to 1800 Mbps (574 Mbps on 2.4GHz and 1201 Mbps on 5.8GHz).
• Port Gigabit Ethernet: Provides a high-speed wired connection for devices like smart TVs, gaming consoles, or PCs.
• Múltiples modes de funcionament: Functions as a Repeater, Access Point (AP), or Router.
• 4 antenes d'alt guany: Enhances signal penetration and coverage.
• Seguretat WPA3: Offers advanced network security protection.
• Pantalla LCD: Provides clear working status and simplifies setup.
• WPS One-Click Setup: For quick and easy connection to your existing router.

2. Contingut del paquet

Si us plau, verifiqueu que tots els elements siguin presents al vostre paquet:

• 1 x NEWFAST AX1800 Dual Band WiFi Extender (NF-RE553)
• 1 x Manual d'usuari (aquest document)
• 1 x cable Ethernet RJ-45

3. Guia de configuració

This section outlines the steps to set up your NEWFAST AX1800 WiFi 6 Range Extender.

3.1. Col·locació inicial

For the initial setup, it is recommended to plug the extender into a power outlet near your main router. Once configured, you can relocate it to an optimal position.

3.2. Encès

Plug the extender into a standard electrical outlet. Wait for the device to power on and initialize. The LCD screen will display the current status.

3.3. Mètodes de connexió

There are two primary methods to connect the extender to your existing Wi-Fi network: WPS (Wi-Fi Protected Setup) or Web Configuració del navegador.

3.3.1. WPS One-Click Setup (Recommended for quick setup)

1. Connecteu l'extensor a una presa de corrent propera al vostre encaminador.
2. Wait for the extender to boot up.
3. Premeu el botó WPS del vostre encaminador principal.
4. Within two minutes, press the WPS button on the NEWFAST AX1800 extender. The WPS indicator on the extender will flash during the connection process.
5. Once the WPS indicator on the extender becomes solid, the connection is successful.

Image 3.1: Illustration of the WPS one-key connection process between a router and the NEWFAST AX1800 extender.

3.3.2. Web Configuració del navegador

1. Connecteu l'extensor a una presa de corrent.
2. Connect your computer or mobile device to the extender's default Wi-Fi network (e.g., "NEWFAST_EXT"). No password is required initially.
3. Obre a web browser and enter the default IP address or domain name (usually found on a label on the device or in the quick start guide, e.g., http://192.168.1.254 or http://re.newfast.com).
4. Follow the on-screen instructions to create an administrator password and select your desired operating mode (Repeater, AP, or Router).
5. If selecting Repeater mode, choose your existing Wi-Fi network from the list and enter its password.
6. Complete the setup. The extender will restart, and its network name will change (e.g., your_network_name_EXT).

3.4. Col·locació òptima

After successful setup, unplug the extender and move it to a location between your router and the Wi-Fi dead zone. The smart signal indicator on the LCD screen will help you find the best spot for maximum coverage and signal strength. Aim for a location where the signal indicator shows a strong connection to your main router.

Image 3.2: An illustration demonstrating how the WiFi extender can be strategically placed to ensure wireless signal coverage throughout an entire home, including areas like the balcony, bathroom, kitchen, and living room.

4. Modes de funcionament

The NEWFAST AX1800 WiFi 6 Range Extender supports multiple operating modes to suit various networking needs.

Image 4.1: Visual representation of the three primary operating modes: Repeater, Router, and AP (Access Point) mode.

4.1. Repeater Mode (Default)

In Repeater mode, the extender wirelessly connects to your existing router and amplifies its signal, extending coverage to areas with weak or no Wi-Fi. This mode is ideal for eliminating dead zones.

4.2. Access Point (AP) Mode

In AP mode, the extender connects to your router via an Ethernet cable and transforms your wired network connection into a wireless access point. This is useful for adding Wi-Fi capability to a wired-only network or creating a new Wi-Fi network in a specific area.

4.3. Router Mode

In Router mode, the extender acts as a primary router, connecting directly to your modem via an Ethernet cable to create a new private wireless network. This mode is suitable if you do not have an existing router.

4.4. Using the Gigabit Ethernet Port

The integrated Gigabit Ethernet port (WAN/LAN) allows you to connect a wired device (like a desktop computer, smart TV, or gaming console) to the extender, providing a stable and high-speed internet connection. This port can also be used for AP or Router mode connections.

Imatge 4.2: Una imatge detallada view of the WAN/LAN Gigabit Ethernet port, demonstrating its use for wired connections.

5. Especificacions

Detailed technical specifications for the NEWFAST AX1800 WiFi 6 Range Extender (NF-RE553).

Imatge 5.1: Detallada view highlighting the LCD Intelligent Screen Display, Wired Gigabit port, and the four high-gain antennas of the extender.

6. Solució De Problemes

This section provides solutions to common issues you might encounter with your NEWFAST AX1800 WiFi 6 Range Extender.

6.1. No Internet Access After Setup

• Check Router Connection: Assegureu-vos que el vostre encaminador principal tingui una connexió a Internet activa.
• Extender Placement: Relocate the extender closer to your main router to ensure it receives a strong signal. The signal indicator on the LCD should show a good connection.
• Re-configure: Try re-running the setup process (WPS or Web Browser) to ensure the extender is correctly connected to your main Wi-Fi network.
• Conflicte d'adreça IP: If using AP or Router mode, ensure there are no IP address conflicts with other devices on your network.

6.2. Weak Signal from Extender

• Col·locació òptima: Ensure the extender is placed in an optimal location, roughly halfway between your router and the desired coverage area. Avoid placing it near large metal objects, concrete walls, or other electronic devices that may cause interference.
• Ajust de l'antena: Adjust the four external antennas for better signal reception and transmission.
• Interferència: Minimize interference from other devices operating on similar frequencies (e.g., microwaves, cordless phones).

6.3. No es pot accedir Web Pàgina de gestió

• Correct IP/Domain: Ensure you are using the correct IP address or domain name (e.g., http://192.168.1.254 or http://re.newfast.com).
• Connected to Extender: Verify that your device is connected to the extender's Wi-Fi network, not your main router's network.
• Esborra la memòria cau del navegador: Esborra el teu web la memòria cau i les galetes del navegador o proveu un altre navegador.
• Reinicia: Restart both the extender and your computer/device.

6.4. Forgot Administrator Password

If you forget the administrator password for the web management page, you will need to perform a factory reset on the extender. Refer to Section 7.1 for instructions on how to reset the device.

7. Manteniment

Proper maintenance ensures the longevity and optimal performance of your NEWFAST AX1800 WiFi 6 Range Extender.

7.1. Restabliment de fàbrica

A factory reset will restore the extender to its default settings, erasing all custom configurations. This can be useful for troubleshooting persistent issues or if you forget your administrator password.

1. With the extender powered on, locate the Reset button (usually a small pinhole) on the device.
2. Use a paperclip or a thin object to press and hold the Reset button for approximately 5-10 seconds until the LED indicators flash or the device restarts.
3. Release the button. The extender will reboot with factory default settings. You will need to reconfigure it as per the setup guide.

7.2. Actualitzacions de firmware

Periodically check the NEWFAST official website for firmware updates. Firmware updates can improve performance, add new features, and enhance security. Follow the instructions provided with the firmware update carefully.

7.3. Neteja

Ensure the device is unplugged before cleaning. Use a soft, dry cloth to wipe the exterior of the extender. Do not use liquid cleaners or abrasive materials.

8. Garantia i Suport

8.1. Informació de la garantia

The NEWFAST AX1800 WiFi 6 Range Extender comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official NEWFAST weblloc web per obtenir informació detallada sobre els termes i condicions de la garantia. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.

8.2. Suport tècnic

For technical assistance, troubleshooting, or product inquiries, please contact NEWFAST customer support through the following channels:

• Oficial Weblloc: Visit the NEWFAST official weblloc web amb preguntes freqüents, recursos d'assistència i informació de contacte.
• Suport per correu electrònic: Consulteu l'embalatge del producte o la fitxa oficial weblloc web per a l'adreça de correu electrònic d'atenció al client.

When contacting support, please have your product model (NF-RE553) and a detailed description of your issue ready.