Bissell Pet Hair Eraser Allergen Lift-Off Vacuum 39883 User Manual

Introducció

This manual provides instructions for the safe and effective use, maintenance, and troubleshooting of your Bissell Pet Hair Eraser Allergen Lift-Off Vacuum, Model 39883. This vacuum is designed for powerful cleaning, featuring a detachable pod for versatile use, a HEPA sealed allergen system, and a tangle-free brush roll for efficient pet hair removal.

Producte acabatview

The Bissell Pet Hair Eraser Allergen Lift-Off Vacuum combines powerful suction with specialized features for pet owners and allergy sufferers.

• Succió potent: Engineered to effectively pick up dirt, fur, and dust from various surfaces.
• Lift-Off Detachable Pod: Allows for lightweight, portable cleaning of stairs, upholstery, and hard-to-reach areas by detaching the canister from the main unit.
• HEPA Sealed Allergen System: Traps 99.97% of dust allergens inside the vacuum, preventing them from re-entering the air.
• Rotlle de raspall antiembolics: Designed to prevent hair wrap, ensuring consistent cleaning performance.
• Scatter-Free Technology: Optimizes cleaning on hard floors by minimizing scatter of debris.
• XL Tank Capacity: Features a 1-liter Easy Empty dirt tank for convenient disposal of collected debris.
• Eines incloses: Comes with a 2-in-1 Dusting Brush/Crevice Tool and a TURBOERASER Pet Tool for specialized cleaning tasks.

Figure 1: Bissell Pet Hair Eraser Allergen Lift-Off Vacuum 39883.

Muntatge i muntatge

Your vacuum requires minimal assembly. Ensure all components are present before beginning.

1. Insert the handle assembly into the main vacuum body until it clicks securely into place.
2. Attach the hose to the back of the vacuum by aligning the tabs and twisting clockwise until it locks.
3. Store the included tools (2-in-1 Dusting Brush/Crevice Tool, TURBOERASER Pet Tool) on the designated storage clips on the vacuum.

Figure 2: Fully assembled vacuum cleaner.

Instruccions de funcionament

Using the Vacuum in Upright Mode

1. Connecteu el cable d'alimentació a una presa de corrent adequada.
2. Step on the foot pedal to recline the vacuum handle.
3. Turn on the vacuum using the power switch located on the handle. Select the appropriate brush roll setting for your floor type (e.g., "Low Carpet/Bare Floor" or "High Carpet").
4. Guide the vacuum across the floor in slow, overlapping passes for optimal cleaning.

Figure 3: Vacuum in upright mode on carpet.

Using the Lift-Off Detachable Pod

1. Ensure the vacuum is in the upright position and turned off.
2. Press the "Lift-Off" release button to detach the canister from the foot.
3. Attach the desired cleaning tool (e.g., crevice tool, TURBOERASER Pet Tool) to the end of the hose or extension wand.
4. Turn on the vacuum and use the detached pod for cleaning stairs, upholstery, or other elevated surfaces.
5. To reattach, align the pod with the foot and push down until it clicks into place.

Figure 4: Detachable pod used for cleaning stairs.

Figure 5: Using the 2-in-1 Dusting Brush/Crevice Tool.

Figure 6: The TURBOERASER Pet Tool in use on upholstery.

Manteniment

Un manteniment regular garanteix un rendiment òptim i allarga la vida útil de l'aspiradora.

Buidatge del tanc de brutícia

1. Assegureu-vos que l'aspirador està desconnectat.
2. Press the tank release button and pull the dirt tank away from the vacuum.
3. Hold the tank over a trash bin and press the bottom release button to empty contents.
4. Close the bottom flap and reattach the tank to the vacuum until it clicks.

Neteja de filtres

The vacuum features a HEPA sealed allergen system. Filters should be cleaned regularly to maintain suction power.

1. Desconnecteu l'aspirador.
2. Remove the dirt tank. Locate the pre-motor filters (usually foam and pleated filters) inside the top of the dirt tank.
3. Remove the filters and tap them against a trash bin to remove loose dirt. Rinse with warm water if heavily soiled, ensuring they are completely dry before reinserting.
4. The post-motor HEPA filter is typically located on the side or back of the vacuum. Refer to the diagram for exact location. Remove and clean as per instructions, ensuring it is completely dry before reinstallation.

Figure 7: Removing the HEPA filter for cleaning.

Neteja del raspall antiembolics

1. Desconnecteu l'aspirador.
2. Lay the vacuum flat on its back.
3. Inspect the brush roll for any tangled hair or debris. Use scissors to carefully cut away any wrapped hair.
4. Assegureu-vos que el corró del raspall giri lliurement.

Figure 8: Inspecting the Tangle-Free Brush Roll.

Resolució de problemes

Si l'aspiradora no funciona com s'espera, consulteu els següents problemes i solucions habituals:

Especificacions

• Marca: Bissell
• Nom del model: NetejaView Turbo Pet Hair Eraser Allergen Lift-Off
• Número de model: 39883
• Característiques especials: Anti-Hair Wrap, HEPA Sealed Allergen System, Lift-Off Technology
• Tipus de filtre: Filtre HEPA
• Recomanació de superfície: Tots els pisos
• Font d'alimentació: Elèctric amb cable
• Capacitat: 1 litres (dipòsit de brutícia)
• Usos recomanats: Carpet, Floor, Home, Pet Hair
• Ús interior/exterior: Interior
• Voltage: 120 Volts
• Factor de forma: Vertical
• Components inclosos: Crevice Tool, Dusting Brush, TURBOERASER Pet Tool
• Pes de l'article: 15.7 lliures
• Dimensions de l'article (L x A x A): 12.94" x 11.93" x 44.65"
• UPC: 011120277258

Garantia i Suport

Per obtenir informació sobre la garantia, el registre del producte o l'assistència tècnica, visiteu el lloc web oficial de Bissell weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.

Assistència en línia: www.bissell.com/support