Dorman 57653
Dorman 57653 Driver Side Plastic Backed Door Mirror Glass
Model: 57653 | Marca: Dorman
Producte acabatview
This Dorman 57653 Driver Side Plastic Backed Door Mirror Glass is engineered as a direct replacement for the original mirror glass on specific vehicle models. It features heating capabilities and a blind spot indicator, designed to seamlessly integrate with your vehicle's existing mirror assembly.
Les característiques clau inclouen:
- Substitució directa: Matches the original mirror glass on specific vehicles.
- Seamless design: Precisely cut to match the shape and look of the factory glass.
- Cost-effective solution: Allows replacement of only the broken mirror glass, not the entire mirror assembly.
- Fàcil instal·lació: Designed for a straightforward, step-by-step replacement procedure.
- Vehicle-specific fit: Ensure compatibility by checking your vehicle's make and model.
Guia d'instal·lació
This section provides general instructions for replacing your vehicle's driver side door mirror glass. Specific steps may vary slightly depending on your vehicle model. It is recommended to consult your vehicle's service manual for detailed instructions.
Eines i materials necessaris:
- New Dorman 57653 Mirror Glass (includes 1 Mirror Glass and 1 Mounting Clip)
- Plastic trim removal tool (recommended to prevent damage)
- Joc de tornavisos (Phillips i de punta plana, segons calgui)
- Drap net
Instal·lació pas a pas:
- Preparar el vehicle: Park the vehicle on a level surface and engage the parking brake. Turn off the ignition and remove the key.
- Remove Old Mirror Glass:
Carefully pry the old, broken mirror glass from its housing. Use a plastic trim removal tool to gently separate the glass from the backing plate. If the glass is severely shattered, wear protective gloves and eye protection. Disconnect any electrical connectors (for heating or blind spot indicator) attached to the old glass.

Imatge: Part posterior view of the Dorman 57653 mirror glass, illustrating the plastic backing plate and the electrical connections for heating and blind spot indicator.
- Inspect the Mirror Housing:
Clean any debris or remaining adhesive from the mirror housing and the motor assembly. Ensure the mounting clips or tabs are intact and ready to receive the new glass.
- Connecteu els cables elèctrics:
Connect the electrical wires from the vehicle's mirror assembly to the corresponding terminals on the back of the new Dorman 57653 mirror glass. Ensure a secure connection for proper heating and blind spot indicator functionality.

Imatge: Detallada view of the rear of the Dorman 57653 mirror glass, highlighting the wiring harness and the central mounting clip mechanism.
- Install New Mirror Glass:
Align the new mirror glass with the mirror housing. Gently but firmly press the center of the mirror glass until it snaps securely into place on the mounting clips or motor assembly. Ensure all clips are engaged and the glass is flush with the housing.

Imatge: Frontal view of the Dorman 57653 driver side mirror glass, showing the integrated blind spot indicator triangle in the upper left corner and the heating element symbol in the lower right.
- Funcionalitat de prova:
Turn on the vehicle's ignition. Test the mirror's adjustment controls to ensure it moves freely. If applicable, activate the rear defroster to test the heating function and check the blind spot indicator for proper operation.

Imatge: Side profile view of the Dorman 57653 mirror glass, demonstrating its sleek, low-profile disseny.
Instruccions de funcionament
The Dorman 57653 mirror glass functions as a direct replacement for your vehicle's original equipment. Once installed, its operation is integrated with your vehicle's existing systems.
Ajust del mirall:
Adjust the mirror angle using your vehicle's standard mirror adjustment controls (joystick, buttons, etc.) located inside the cabin. Ensure the mirror provides an optimal view of the rear and side of your vehicle.
Heated Functionality:
If your vehicle is equipped with a heated mirror feature, the heating element within this mirror glass will activate automatically or when you engage your vehicle's rear defroster, depending on your vehicle's design. This helps to clear frost, ice, and fog from the mirror surface.
Blind Spot Indicator:
The integrated blind spot indicator will function in conjunction with your vehicle's blind spot monitoring system. When a vehicle is detected in your blind spot, a visual alert (typically an illuminated symbol) will appear on the mirror surface.
Cura i Manteniment
Proper care will ensure the longevity and clarity of your Dorman mirror glass.
- Neteja: Clean the mirror surface regularly with a soft, lint-free cloth and a standard automotive glass cleaner. Avoid abrasive cleaners or materials that could scratch the glass.
- Inspecció: Periodically inspect the mirror for any signs of damage, cracks, or loose connections. Address any issues promptly to maintain optimal visibility and safety.
- Cura d'hivern: During winter months, allow the heated mirror function to melt ice and snow naturally. Avoid scraping ice off the mirror surface with sharp objects, as this can cause damage.
Resolució de problemes
If you encounter issues with your Dorman 57653 mirror glass, consider the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Mirror not heating | Disconnected or faulty electrical wiring; blown fuse in vehicle's system. | Check electrical connections at the back of the mirror glass. Inspect vehicle's fuse box for a blown fuse related to mirror heating. Consult a qualified technician if the issue persists. |
| Blind spot indicator not illuminating | Disconnected electrical wiring; issue with vehicle's blind spot monitoring system. | Verify electrical connections to the mirror glass. This mirror glass is a component of the blind spot system; if the issue persists, the problem may lie with the vehicle's sensor or control module. Consult a qualified technician. |
| Mirror glass is loose or vibrates | Improper installation; mounting clips not fully engaged. | Gently press on the center of the mirror glass to ensure it is fully seated and all mounting clips are engaged. Re-install if necessary, ensuring proper alignment. |
Note: For complex electrical issues or if you are unsure about any step, it is recommended to seek assistance from a certified automotive technician.
Especificacions del producte
| Atribut | Detall |
|---|---|
| Marca | Dorman |
| Número de model | 57653 |
| Dimensions de l'article (L x A x A) | 8.86 x 6.3 x 2.17 polzades |
| Pes de l'article | 0.5 lliures (8 unces) |
| Components inclosos | 1 Mirror Glass and 1 Mounting Clip |
| Tipus d'ajust | Ajust específic del vehicle |
| Número de peça OEM | 68228919AA; 68228919AB |
| UPC | 194883680197 |
| Fabricant | Productes Dorman |
| Primera data disponible | 27 de novembre de 2024 |
| Acabat exterior | Ready To Paint If Needed |
Informació de la garantia
Specific warranty details for the Dorman 57653 Driver Side Plastic Backed Door Mirror Glass are not provided in this manual. For information regarding product warranty, please refer to the packaging, contact the retailer where the product was purchased, or visit the official Dorman weblloc.
Atenció al client
For further assistance, technical support, or inquiries regarding the Dorman 57653 mirror glass, please contact Dorman Products directly.
- Fabricant: Productes Dorman
- Recursos en línia: Podeu trobar més informació i recursos de suport visitant el lloc web oficial Botiga Dorman a Amazon.
- Contacte: Refer to the Dorman Products official website for direct contact information, including phone numbers and email support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.