Manual d'instruccions de la cadira d'oficina ergonòmica DEVAISE ABGY013

Introducció

Thank you for choosing the DEVAISE ABGY013 Ergonomic Office Chair. This manual provides essential information for the proper assembly, operation, maintenance, and troubleshooting of your new office chair. Please read these instructions carefully before use to ensure safe and optimal performance.

Informació important de seguretat

Si us plau, observeu les següents pautes de seguretat:

• Capacitat de pes màxim: This chair is designed to support a maximum weight of 300 pounds (136 kg). Do not exceed this limit.
• Ajustaments: Use caution when adjusting chair parts to prevent injury. Ensure all locking mechanisms are engaged after adjustment.
• Estabilitat: Always sit properly in the chair with both feet on the floor. Avoid standing on the chair or using it as a step stool.
• Manteniment: Reviseu regularment tots els cargols i perns per assegurar-vos que estiguin ben ajustats. Torneu a apretar-los si cal.
• Nens: Keep children away from the chair during assembly and adjustment.

Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar el muntatge:

• Muntatge del respatller
• Coixí de seient
• Reposabraços (2)
• Reposacaps
• Base de la cadira
• Cilindre d'elevació de gas
• Rodes (5)
• Kit de ferramenta (cargols, volanderes, clau Allen)
• Manual d'instruccions

Muntatge i muntatge

Assembly typically takes approximately 20 minutes. It is recommended to have a second person for certain steps.

1. Attach Castors to Base: Insert the five castors into the holes at the end of each leg of the chair base. Push firmly until they click into place.
2. Inseriu l'elevador de gas: Col·loqueu el cilindre d'elevació de gas al forat central de la base de la cadira.
3. Fixar els reposabraços al seient: Fixeu els reposabraços a la part inferior del coixí del seient amb els cargols proporcionats. Assegureu-vos que estiguin orientats correctament.
4. Fixar el respatller al seient: Connect the backrest assembly to the seat cushion using the designated screws.
5. Fixar el reposacaps: Slide the headrest into the top of the backrest and secure it according to the instructions in the hardware kit.
6. Connecteu el conjunt del seient a l'elevador de gas: Col·loqueu amb cura el seient i el respatller muntats sobre el cilindre d'elevació de gas, assegurant-vos que estigui centrat i estable.

Figure 1: Fully assembled DEVAISE ABGY013 Ergonomic Office Chair.

Instruccions de funcionament

Your DEVAISE ABGY013 chair offers multiple adjustment features for personalized comfort.

1. Ajust d'alçada del seient

Per ajustar l'alçada del seient, localitzeu la palanca al costat dret, sota el seient. Mentre esteu asseguts, estireu la palanca cap amunt per baixar el seient. Per aixecar el seient, aixequeu-vos lleugerament i estireu la palanca cap amunt. Deixeu anar la palanca a l'alçada desitjada.

2. Reclinació i bloqueig del respatller

The backrest can recline from 90° to 135°. To recline, pull the lever on the left side beneath the seat. Lean back to your desired angle and release the lever to lock it in place. To return to an upright position, pull the lever again and lean forward slightly.

Figure 2: Illustration of the 3-gear recline and height adjustment levers.

3. Tilt Tension Adjustment

The tilt tension knob is located underneath the front of the seat. Turn the knob clockwise to increase the tension, making it harder to recline. Turn it counter-clockwise to decrease tension, allowing for easier recline.

4. Reposabraços ajustables en 3D

The armrests offer three-dimensional adjustments:

• Ajust d'alçada: Press the button on the side of each armrest and move it up or down to your preferred height. Release the button to lock.
• Ajust endavant/enrere: Feu lliscar el reposabraços cap endavant o cap enrere.
• Rotació: Gireu el reposabraços a l'esquerra o a la dreta.

Figure 3: Demonstrates the various adjustments for the 3D armrests.

5. Multi-Dimensional Headrest Adjustment

The headrest can be adjusted for optimal neck support:

• Ajust d'alçada: Pull the headrest up or push it down to adjust its vertical position.
• Ajust d'angle: Tilt the headrest forward or backward to find the most comfortable angle.

Figure 4: Illustrates the forward/backward, up/down, and rotational adjustments of the headrest.

6. Adaptive Lumbar Support

The chair features adaptive lumbar support that automatically adjusts to your lower back curve. No manual adjustment is typically required for this feature.

Figure 5: Visual representation of the ergonomic lumbar support system.

7. Breathable Mesh and Dual-Layer Cushion

The backrest and seat are constructed with breathable mesh and a dual-layer high-density foam cushion for ventilation and comfort during extended use.

Figure 6: Details the W-shaped ergonomic cushion design for pressure relief.

8. Característiques del producteview Vídeo

Manteniment

Proper maintenance ensures the longevity and performance of your chair:

• Neteja: Netegeu amb un anunciamp drap. Eviteu productes químics agressius o netejadors abrasius.
• Elements de fixació: Periodically check all screws and bolts. Tighten any loose fasteners to maintain stability and safety.
• Parts mòbils: Ensure the castors and gas lift operate smoothly. Clean any debris from the castors if movement becomes restricted.

Resolució de problemes

Especificacions

Figure 7: Detailed dimensions of the DEVAISE ABGY013 Ergonomic Office Chair.

Garantia i Suport

The DEVAISE ABGY013 Ergonomic Office Chair is backed by a two-year warranty. For any issues, questions, or support needs, please contact the dedicated DEVAISE customer support team. Refer to your purchase documentation for specific contact details or visit the official DEVAISE weblloc.