1. Producte acabatview
The Hertz CENTO POWER CP 4.800 is a 4-channel power amplifier designed to enhance your car audio system. It features Hi-Res Audio certification, providing a frequency response from 10 Hz to 41 kHz for detailed sound reproduction. This amplifier combines a high power-to-size ratio with an efficiency greater than 85%, housed in a durable aluminum diecast case. It offers full Plug & Play connections for straightforward installation and includes advanced crossover filters and bass boost options for sound customization.
2. Característiques clau
- Certificació d'àudio d'alta resolució: Delivers a frequency response from 10 Hz to 41 kHz for superior sound quality.
- High Power-to-Size Ratio: Efficient design with over 85% efficiency in a compact form factor.
- Construcció duradora: Encased in a robust aluminum diecast case for longevity and heat dissipation.
- Plug & Play Connections: Simplifies installation with user-friendly connections.
- Advanced Sound Customization: Features advanced crossover filters and bass boost options for tailored audio output.
- Universal Speaker Simulator (USS): Allows integration with a wide range of input voltages (1.6V to 40V RMS), compatible with both factory and aftermarket head units.
- Ampli vol operatiutage: Power supply engineered to handle 9 to 18 Volts, suitable for various vehicle electrical systems, including modern and electric vehicles.
3. Configuració i instal·lació
The CP 4.800 amplifier is designed for flexible installation. Its compact D-Class technology allows for high output from a small footprint, reducing heat and improving power management, which is beneficial in tight installation spaces. The Universal Speaker Simulator (USS) technology ensures compatibility with a broad range of input voltages, from 1.6V to 40V RMS, allowing seamless integration with both advanced factory head units and aftermarket systems. The power supply supports a voltage range of 9 to 18 Volts, making it suitable for traditional 12V charging systems, modern vehicles with advanced electrical systems, and electric vehicles where voltage can vary significantly. All connections are designed for plug-and-play ease.
4. Funcionament del Ampmés viu
The CP 4.800 offers significant flexibility in its channel configuration. It can operate as a 4-channel amplifier, or be bridged down to a 3-channel or 2-channel setup. It is 2-ohm stable, providing 110 Watts x 4 channels at 4 ohms, or 190 Watts x 4 channels at 2 ohms. When bridged, it can deliver 380 Watts x 2 channels at 4 ohms. This versatility makes it suitable for powering front and rear speakers, or for a 3-way active setup utilizing the mids and highs. The amplifier includes advanced crossover filters and bass boost options, accessible via top-mounted controls, allowing for precise sound tuning.
5. Manteniment
To ensure optimal performance and longevity of your Hertz CP 4.800 amplifier, regular maintenance is recommended. Keep the amplifier clean and free from dust and debris. Ensure adequate ventilation around the unit to prevent overheating. Periodically check all wiring connections for tightness and corrosion. Avoid exposing the ampLifer a temperatures o humitat extremes.
6. Solució De Problemes
If you experience issues with your Hertz CP 4.800 amplifier, consider the following basic troubleshooting steps:
- Sense energia: Check the power connections (+12V, GND, REM) and ensure the fuse is intact. Verify the vehicle's battery voltage is within the 9-18V operating range.
- Sense so: Confirm all input (Pre-In/Speaker-In) and speaker output connections are secure. Check the source unit for proper output. Verify amplifier settings, including level and crossover filters.
- So distorsionat: Adjust input gain (Level) to prevent clipping. Check speaker impedance to ensure it matches the amplifier's stable operating range. Inspect speaker wiring for shorts.
- Sobreescalfament: Assegureu-vos el amplifier has sufficient ventilation. Reduce the volume or check for speaker impedance issues that might cause excessive load.
Si hi ha problemes persistents, consulteu un tècnic professional d'àudio per a cotxes.
7. Especificacions
| Especificació | Valor |
|---|---|
| Fabricant | Hertz |
| Model | CP-4.800 |
| Marca | HERTZ |
| Nombre de canals | 4 |
| Amp Classe | D |
| Alimentació nominal Voltage (fusible) | 11 ÷ 15 VDC (1 x 40 A) |
| Font d'alimentació en funcionament Voltage | 9 ÷ 18 VDC |
| Corrent de ralentí | 1.15 A |
| Consum de corrent en espera | 4.2 uA |
| Consumption, MIN load impedance (Max Musical Power) | 32 A |
| Entrada remota | 4 ÷ 17 VDC (1 mA) |
| ART - Automatic Remote Turn on/off from SPK-IN (BTL radio only) | 1.5 VDC |
| Eficiència | 85% |
| Distortion - THD @ 100 Hz, 70% Rated Power | 0.02 % |
| Damping Factor @ 1 kHz, 1W | 100 |
| Ample de banda @ -3 dB | 10 Hz ÷ 47k Hz |
| S/N Ratio (A-weighted @ 1 V Input) | 101 dBA |
| Minimum Load Impedance @ 4 Ch | 2 Ω |
| Minimum Load Impedance @ 3 Ch | 2 Ω + 2 Ω + 4 Ω |
| Minimum Load Impedance @ 2 Ch | 4 Ω |
| Adjustable Crossovers | Sí |
| Output Power (RMS) @ 1% THD: 4Ch @ 4Ω | 110 W x 4 |
| Output Power (RMS) @ 1% THD: 4Ch @ 2Ω | 190 W x 4 |
| Output Power (RMS) @ 1% THD: 3Ch @ 4Ω / 4Ω | 100 W x 2 + 400 W x 1 |
| Output Power (RMS) @ 1% THD: 3Ch @ 2Ω / 4Ω | 190 W x 2 + 380 W x 1 |
| Output Power (RMS) @ 1% THD: 2Ch @ 4Ω | 380 W x 2 (4Ω) |
| Potència total | 760 W |
| Entrades | Pre-In / Speaker-In |
| Pre Sortida | Full Range (Front) |
| Pre-In Sensitivity | 0.32 ÷ 8 VRMS |
| Speaker-In Sensitivity | 1 |
| Tipus de muntatge | Autònom |
| Tipus de material | Alumini |
| Pes de l'article | 5 lliures |
| Recompte d'unitats | 1.0 recompte |
8. Què hi ha a la caixa
- Hertz CP-4.800 AmpUnitat lificadora
9. Garantia i Suport
The Hertz CP 4.800 Cento 4-Channel Power Amplifier ve amb a 1 any de garantia del fabricant. For technical support, service, or warranty claims, please contact your authorized Hertz dealer or visit the official Hertz weblloc per obtenir informació de contacte.
10. Vídeos de productes
Hertz Audio CP Series Amplifiers - Product Overview
Aquest vídeo ofereix una descripció completaview of the Hertz CP Series amplifiers, highlighting their features, technology, and benefits for car audio enthusiasts.
Hertz CP 4.800 4-Channel Amplifier - Product Showcase
A brief product showcase of the Hertz CP 4.800 4-Channel Amplifier, demonstrating its design and key aspects.