KUNPHY Ultrasonic Jewelry Cleaner BCM-187

1. Introducció

This manual provides essential information for the safe and effective use of your KUNPHY Ultrasonic Jewelry Cleaner, model BCM-187. This device utilizes ultrasonic waves to clean various items such as jewelry, eyeglasses, and small accessories, offering a thorough cleaning process.

2. Informació de seguretat

Please read all safety instructions before operating the device to prevent injury or damage.

• No submergiu la unitat principal en aigua o altres líquids.
• Assegureu-vos que el cable d'alimentació no estigui danyat i que estigui connectat correctament a una presa de corrent adequada.
• Mantingueu el dispositiu fora de l'abast dels nens.
• Do not operate the cleaner without water in the tank.
• Avoid cleaning items that are sensitive to ultrasonic vibrations, such as certain types of pearls, emeralds, or glued items. Consult a jeweler if unsure.
• Desendolleu el dispositiu quan no l'utilitzeu i abans de netejar-lo.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• KUNPHY Ultrasonic Jewelry Cleaner (BCM-187)

4. Producte acabatview

The KUNPHY Ultrasonic Jewelry Cleaner features a compact design with a stainless steel cleaning tank and a simple one-touch operation button. It is equipped with a transparent lid to observe the cleaning process.

5. Configuració i funcionament

Follow these steps for initial setup and to operate your ultrasonic cleaner:

1. Omplir el dipòsit: Open the lid and pour tap water into the stainless steel tank. Do not exceed the maximum water level indicator.
2. Col·locar elements: Carefully place the items you wish to clean into the water. Ensure items are fully submerged but not overcrowded.
3. Afegir solució de neteja (opcional): For enhanced cleaning results, add a few drops of liquid dish soap or a specialized KUNPHY cleaning solution to the water.
4. Comença a netejar: Close the lid and press the one-touch ON/OFF button. The indicator light will illuminate, and the cleaning cycle will begin. The device operates with a 3-minute cleaning cycle.
5. Neteja final: Once the cycle is complete, the device will automatically stop. Open the lid, carefully remove your items, and rinse them under clean water. Dry with a soft cloth.

Items Suitable for Cleaning:

• Jewelry (rings, necklaces, earrings, bracelets)
• Ulleres i ulleres de sol
• Watch coins (waterproof watches only)
• Dentures and retainers
• Small metal items

Rendiment de neteja:

The cleaner operates at 46KHz, providing 360-degree deep cleaning. The process is designed to be gentle yet effective, removing dirt and grime from hard-to-reach areas without causing damage.

6. Manteniment

Proper maintenance ensures the longevity and optimal performance of your cleaner.

• Després de cada ús: Unplug the device. Empty the water from the tank and wipe the interior with a soft, dry cloth.
• Neteja exterior: Netegeu l'exterior de la unitat amb un damp drap. No utilitzeu productes de neteja abrasius ni submergiu la unitat en aigua.
• Emmagatzematge: Guardeu el netejador en un lloc fresc i sec quan no l'utilitzeu.

7. Solució De Problemes

If you encounter issues with your KUNPHY Ultrasonic Jewelry Cleaner, refer to the following common problems and solutions:

8. Especificacions

• Model: BCM-187
• Capacitat del dipòsit: 12 oz (350 ml)
• Freqüència d'ultrasons: 46 KHz
• Cicle de neteja: 3 minutes (one-touch operation)
• Dimensions del producte: 7 x 3 x 3 polzades
• Pes: 1.1 lliures
• Material del dipòsit: Acer inoxidable SUS 304
• Nivell de soroll: Less than 45dB (low-noise design)

9. Garantia i Suport

KUNPHY provides a 12 mesos de garantia for this product. For any questions or support needs, please contact KUNPHY customer service.

To contact support, navigate to your Amazon account:

1. Vés a Compte.
2. Seleccioneu Comandes.
3. Find your order for the KUNPHY Ultrasonic Jewelry Cleaner and click on Detall de la comanda.
4. Locate the 'Sold by: KUNPHY' section and click Fes una pregunta.