ZJchao 12V Linear Actuator Instruction Manual

1. Introducció

This instruction manual provides essential information for the safe and efficient use of your ZJchao 12V Linear Actuator. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. Característiques del producte

• Protecció robusta: Designed with an internal limit switch and a 12V input voltage, boasting an IP60 grade for dependable operation across various conditions.
• Construcció duradora: Utilizes advanced powder metallurgy technology in its fuselage, ensuring sturdiness and extending the actuator's lifespan.
• Compacte i lleuger: Features a geared motor, making it lightweight and compact for easy integration into tight spaces.
• Aplicacions versàtils: Suitable for a wide range of uses, including equipment, industrial automation, agricultural machinery, catering systems, and ventilation services.
• Funcionament eficient: Offers a 30mm stroke with noise elimination features and short circuit protection, optimizing performance for various applications.

3. Especificacions

4. Informació de seguretat

Always observe the following safety precautions to prevent injury or damage to the actuator:

• Assegureu-vos que la font d'alimentació coincideixi amb el volum de l'actuadortage (12 V CC).
• Do not exceed the rated load capacity (70N).
• Avoid operating the actuator beyond its specified work rate (10%). Continuous operation can lead to overheating and damage.
• Mantingueu les mans i la roba allunyades de les parts mòbils durant el funcionament.
• Do not modify the actuator or its internal components.
• Ensure proper ventilation around the actuator during operation.
• Desconnecteu l'alimentació abans de realitzar qualsevol instal·lació, manteniment o resolució de problemes.

5. Configuració i instal·lació

Segueix aquests passos per a una instal·lació correcta del teu actuador lineal:

1. Muntatge: Securely attach the actuator to a stable surface using appropriate fasteners through the mounting holes at both ends. Ensure the mounting points can withstand the actuator's maximum force.
2. Connexió elèctrica: Connect the actuator to a 12V DC power source. The actuator typically has two wires (red and black). Connect the red wire to the positive (+) terminal and the black wire to the negative (-) terminal for extension. Reversing the polarity will cause the actuator to retract.

Figura 1: Frontal view of the ZJchao 12V Linear Actuator, showing its compact design and mounting points.

Figure 2: Close-up of the wiring connections on the ZJchao 12V Linear Actuator, illustrating the red and black power leads.

3. Prova: After installation, apply power to test the extension and retraction. Observe for smooth operation and ensure the internal limit switches stop the actuator at its full stroke.

6. Instruccions de funcionament

The ZJchao 12V Linear Actuator is designed for simple operation:

• Extensió: Apply 12V DC power with correct polarity (red to +, black to -). The actuator rod will extend until it reaches its full 30mm stroke, at which point the internal limit switch will stop it.
• Retracció: Reverse the polarity of the 12V DC power supply (red to -, black to +). The actuator rod will retract until it reaches its fully retracted position, where the internal limit switch will stop it.
• Cicle de treball: The actuator has a work rate of 10%. This means it should operate for a maximum of 1 minute, followed by a minimum of 9 minutes of rest. Exceeding this duty cycle can lead to overheating and premature failure.

7. Manteniment

Regular maintenance ensures the longevity and reliable performance of your linear actuator:

• Neteja: Keep the actuator rod and housing clean and free from dust, dirt, and debris. Use a soft, dry cloth. Avoid using harsh chemicals or solvents.
• Inspecció: Periodically inspect the actuator for any signs of wear, damage, or loose connections. Check mounting points for security.
• Lubricació: The internal components are pre-lubricated. Do not attempt to lubricate the internal mechanism unless specifically instructed by the manufacturer. Keep the exposed part of the actuator rod clean.
• Emmagatzematge: Store the actuator in a dry, clean environment within the specified operating temperature range when not in use.

8. Solució De Problemes

Si teniu problemes amb el vostre actuador lineal, consulteu els següents problemes i solucions habituals:

9. Garantia i Suport

For warranty information or technical support, please refer to the product packaging or contact the retailer from whom you purchased the ZJchao 12V Linear Actuator. Please have your model number (ZJchaos2tgrzv4ce-12) and ASIN (B0DQ4MXRYR) ready when contacting support.