Manual d'usuari del sistema de micròfon sense fil per a guitarra acústica ACEMIC AT-5

1. Introducció

This manual provides detailed instructions for the ACEMIC AT-5 Acoustic Guitar Wireless Microphone System. This system is designed to provide high-fidelity audio transmission for plucked string instruments, offering freedom of movement and clear sound reproduction. It utilizes UHF frequency for stable wireless connectivity and features a flexible gooseneck microphone for precise sound capture.

2. Contingut del paquet

Si us plau, verifiqueu que tots els elements que s'enumeren a continuació estiguin inclosos al vostre paquet:

• 1 x ACEMIC AT-5 Wireless Microphone Transmitter (with gooseneck microphone)
• 1 x ACEMIC AT-5 Wireless Receiver (with 6.35mm jack and antenna)
• 1 x cable de càrrega USB-C
• 1 x 3.5mm Audio Jack Adapter
• 5 x Velcro Adhesive Attachments
• 1 x Spare Microphone Foam Cover
• 1 x Manual d'usuari
• 1 x bossa de transport

3. Producte acabatview

The ACEMIC AT-5 system consists of two main components: the Transmitter and the Receiver.

3.1. Transmitter (Microphone Unit)

• Micròfon de coll de cisne: Flexible arm for precise positioning.
• Microphone Foam Cover: Reduces plosives and wind noise.
• Botó d'encesa: For turning the unit on/off.
• Port de càrrega (USB-C): Per recarregar la bateria interna.
• Sensor IR: For automatic pairing with the receiver.

3.2. Receptor

• Conector d'àudio de 6.35 mm: Es connecta a amplifiers, mixers, or PA systems.
• Antena: For stable signal reception.
• Botó d'encesa: For turning the unit on/off.
• Port de càrrega (USB-C): Per recarregar la bateria interna.
• Visualització: Mostra informació del canal.
• Botó de canvi de canal: For manual channel selection.
• Sensor IR: For automatic pairing with the transmitter.

4. Instruccions de configuració

Follow these steps to set up your ACEMIC AT-5 wireless microphone system:

4.1. Càrrega de les unitats

1. Connect the USB-C charging cable to the charging ports on both the transmitter and receiver units.
2. Plug the other end of the cable into a USB power adapter (not included) or a powered USB port.
3. The charging indicator will illuminate. A full charge typically takes 2.5 to 3 hours.
4. Once fully charged, the indicator light will change or turn off, depending on the unit.

4.2. Attaching the Transmitter to Your Instrument

1. Select a suitable location on your acoustic guitar, typically near the sound hole, where the transmitter can be securely attached without obstructing your playing.
2. Peel the backing from one of the Velcro adhesive attachments.
3. Apply the adhesive side firmly to the chosen spot on your guitar.
4. Attach the transmitter unit to the Velcro. Ensure it is secure.
5. Adjust the flexible gooseneck microphone to point towards the sound hole or strings for optimal sound capture.

4.3. Connexió del receptor

1. Ensure the antenna on the receiver is correctly installed and extended.
2. Plug the 6.35mm audio jack of the receiver directly into the input of your amplifier, PA system, or audio mixer.
3. If your device requires a 3.5mm input, use the provided 3.5mm audio jack adapter.

4.4. Emparellament de les unitats

The ACEMIC AT-5 system features automatic infrared pairing:

1. Power on both the transmitter and the receiver units.
2. Place the IR sensors of the transmitter and receiver close to each other (within a few inches).
3. The units will automatically pair. A successful connection is usually indicated by a stable light on both units.

5. Funcionament

5.1. Encès / apagat

Press and hold the power button on each unit to turn it on or off.

5.2. Selecció de canals

The system offers 16 preset groups of adjustable channels to mitigate potential interference. If you experience interference, you can manually switch channels on the receiver using the channel switch button. Ensure that the transmitter and receiver are on the same channel for proper operation.

5.3. Col·locació del micròfon

Adjust the flexible gooseneck microphone to achieve the desired sound. Experiment with different angles and distances from the sound hole or strings to find the optimal position for your instrument and playing style. The built-in high-sensitivity condenser microphone is designed to capture clear and realistic audio.

5.4. Transmissió sense fil

The ACEMIC AT-5 system uses UHF frequency for stable transmission up to 130 feet (approximately 40 meters) in open areas. Performance may vary depending on environmental factors and obstacles.

6. Manteniment

6.1. Neteja

Netegeu les unitats amb un drap suau i sec. No utilitzeu netejadors líquids ni dissolvents, ja que poden danyar l'acabat o els components interns.

6.2. Emmagatzematge

When not in use, store the ACEMIC AT-5 system in its carrying bag in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the units are turned off before storage.

6.3. Cura de la bateria

To prolong battery life, avoid completely discharging the units regularly. Recharge them periodically, even if not in frequent use.

7. Solució De Problemes

If you encounter issues with your ACEMIC AT-5 system, refer to the following common problems and solutions:

8. Especificacions

9. Garantia i Suport

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller/manufacturer directly. Specific warranty terms may vary by region and retailer.