HYVOHEX P100 Portable Electric Ball Pump Instruction Manual

1. Introducció

The HYVOHEX P100 Portable Electric Ball Pump is designed for efficient and precise inflation of various sports balls. This device features a digital LED display, preset pressure functionality, and automatic shut-off, making it suitable for basketballs, soccer balls, volleyballs, and more. Its compact design and rechargeable battery ensure convenience and portability.

2. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• 1 x HYVOHEX P100 Sports Pump
• 1 x agulla de bola
• 1 x USB-C Charging Cable (not explicitly listed but implied by rechargeable battery)

3. Característiques del producte

• Inflació ràpida: Quickly inflates sports balls, reducing manual effort and saving time.
• Funcionament intel·ligent: Equipped with a high-sensitivity pressure sensor and digital LED screen to detect current ball pressure and automatically stop upon reaching the preset pressure.
• Àmplia compatibilitat: Supports a pressure range of 2-17 PSI, suitable for basketball, soccer, volleyball, and other inflatable sports equipment.
• Funció de memòria: Retains the last pressure setting for quick and easy repeated use.
• Disseny portàtil: Compact, palm-sized unit with built-in hidden needle storage for easy transport and to prevent loss or damage of the needle.
• Bateria recarregable: Features a 1500mAh rechargeable battery for multiple inflations on a single charge, with USB-C charging and an LED battery indicator.

Image: The HYVOHEX P100 pump is compact and portable, fitting easily in one hand.

Image: The 1500mAh battery allows for inflation of approximately 45 balls per charge.

4. Configuració

1. Carregueu el dispositiu: Before first use, fully charge the ball pump using the provided USB-C cable. The LED battery indicator will show charging status.
2. Enganxeu l'agulla: Retrieve the inflation needle from the hidden storage compartment (located at the top of the pump). Carefully screw the needle into the inflation port on the top of the device.

Image: The inflation needle can be securely stored within the pump's top compartment.

5. Instruccions de funcionament

1. Encès: Press and hold the power button (central button) to turn on the device. The digital LED display will illuminate.
2. Selecciona la unitat de pressió: Long press the power button to cycle through pressure units: PSI, BAR, KPA. Release the button when your desired unit is displayed.
3. Estableix la pressió desitjada: Use the '+' and '-' buttons to adjust the target pressure. Refer to the ball manufacturer's recommendations for optimal pressure (e.g., Basketball: 7-9 PSI, Football: 12-14 PSI, Soccer: 8-16 PSI, Volleyball: 4-5 PSI). The pump will remember your last setting.
4. Insert Needle: Carefully insert the attached needle into the ball's valve. The display will show the current pressure of the ball.
5. Inici de la inflació: Press the power button once to start inflation. The pump will automatically stop when the preset pressure is reached.
6. Apagar: Manteniu premut el botó d'engegada per apagar el dispositiu.

Image: The pump is compatible with various sports balls, with recommended pressure ranges displayed.

Image: Long press the power button to switch between PSI, Bar, and KPA pressure units.

6. Manteniment

• Càrrega: Recharge the device regularly to maintain battery health. Use a standard USB-C charger.
• Needle Storage: Always store the inflation needle in its designated compartment when not in use to prevent bending or loss.
• Neteja: Wipe the pump's exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
• Emmagatzematge: Emmagatzemeu la bomba en un lloc fresc i sec, lluny de la llum solar directa i de temperatures extremes.

7. Solució De Problemes

• Pump not turning on: Ensure the battery is charged. Connect to a USB-C power source and allow it to charge for at least 30 minutes before attempting to power on again.
• Ball not inflating: Check that the needle is securely attached to the pump and fully inserted into the ball's valve. Verify that the preset pressure is higher than the current ball pressure.
• Lectura de pressió incorrecta: Ensure the needle is fully inserted into the ball's valve. If the issue persists, try recalibrating by turning the pump off and on again.
• Pump stops prematurely: The pump automatically stops when the preset pressure is reached. If it stops before the ball is firm enough, increase the preset pressure.
• La bomba fa soroll: A certain level of operating noise is normal for air pumps. If the noise is excessive or unusual, ensure no obstructions are present in the air intake or output.

8. Especificacions

9. Informació de seguretat

• Do not use the pump for purposes other than inflating sports balls.
• Keep out of reach of children. Adult supervision is recommended during use.
• Avoid over-inflating balls beyond their recommended pressure, as this can cause damage or injury.
• No exposeu el dispositiu a l'aigua ni a temperatures extremes.
• No intenteu desmuntar ni reparar el dispositiu vosaltres mateixos. Poseu-vos en contacte amb el servei d'atenció al client si sorgeixen problemes.
• Ensure the inflation needle is properly secured before use to prevent accidental detachment.

10. Garantia i Suport

Specific warranty details and customer support contact information are not provided within this document. Please refer to the manufacturer's official website or the product packaging for comprehensive warranty terms and support options.