DIG P09-155 Inline Y Filter User Manual

1. Producte acabatview

The DIG P09-155 Inline "Y" Filter is designed to protect your irrigation system from debris, sand, and sediment. It features a 155-mesh polyester screen, ensuring precise filtration for drip irrigation, micro sprinklers, and misting systems. This filter helps prevent clogging, safeguards your system components, and improves overall water flow efficiency.

Les característiques clau inclouen:

Filtració eficient: Prevents debris, sand, and sediment from clogging emitters, sprinklers, and valves.
Pantalla duradora: Equipped with a 155-mesh polyester screen for reliable filtration.
Large Filtration Area: A 14.9 sq. in. filtration surface reduces cleaning frequency and minimizes pressure loss.
Connexió fàcil: Designed for 3/4" FHT x MHT connections, compatible with outdoor faucets, gravity feed tanks, or hose-end timers.
Construcció robusta: Built for residential, commercial, and agricultural applications.
Pressió de funcionament: Supports up to 120 PSI with a flow rate up to 13 GPM (780 gallons per hour).

DIG P09-155 Inline Y Filter with 155 Mesh Polyester Screen — Figure 1: DIG P09-155 Inline Y Filter with its internal 155 mesh polyester screen.

2. Informació de seguretat

Please read and understand all safety instructions before installing or operating the DIG P09-155 Inline Y Filter.

Always follow proper installation and usage guidelines to prevent leaks, water damage, and potential injury.
Do not exceed the maximum operating pressure of 120 PSI. Exceeding this pressure can damage the filter and other irrigation components.
Regularly clean and maintain the filter to ensure optimal performance and longevity. Neglecting maintenance can lead to system clogs and reduced efficiency.
Assegureu-vos que totes les connexions estiguin ben fixades per evitar fuites.
Mantenir fora de l'abast dels nens.

3. Què hi ha a la caixa

The package for the DIG P09-155 Inline Y Filter includes:

1 x DIG P09-155 Inline Y Filter Housing
1 x 155 Mesh Polyester Screen
1 x Flush Cap

Components of DIG P09-155 Inline Y Filter: filter housing, screen, and flush cap — Figure 2: The main components of the DIG P09-155 filter, including the housing, internal screen, and flush cap.

4. Configuració i instal·lació

The DIG P09-155 Inline Y Filter is designed for easy installation into your irrigation system. It connects to standard 3/4" FHT (Female Hose Thread) and MHT (Male Hose Thread) connections.

Identificar els punts de connexió: The filter is typically installed between a water source (e.g., outdoor faucet, gravity feed tank) and your irrigation system (e.g., hose-end timer, drip line).
Preparar connexions: Ensure the threads on your water source and irrigation system components are clean and free of debris.
Connecteu-vos a la font d'aigua: Screw the 3/4" FHT end of the filter onto your water source (e.g., outdoor faucet). Hand-tighten first, then use a wrench for a snug fit, but do not overtighten.
Connect Irrigation System: Screw your irrigation system component (e.g., hose-end timer) onto the 3/4" MHT end of the filter. Hand-tighten, then use a wrench for a snug fit.
Comproveu si hi ha fuites: Slowly turn on the water supply and inspect all connections for leaks. Tighten any leaking connections as needed.

DIG P09-155 Inline Y Filter installed with a hose-end timer and connected to a faucet — Figura 3: Example installation of the DIG P09-155 filter connected to an outdoor faucet and a hose-end timer, ready for an irrigation system.

DIG P09-155 Inline Y Filter integrated into a drip irrigation setup with a timer — Figura 4: Un altre view of the DIG P09-155 filter integrated into a drip irrigation system, showing its position between the water source and the timer.

5. Instruccions de funcionament

The DIG P09-155 Inline Y Filter operates passively to filter water as it passes through your irrigation system. Once installed, no further manual operation is typically required beyond regular maintenance.

Ensure the water supply to your irrigation system is turned on.
Verify that water flows freely through the filter and into your irrigation system.
Monitor your irrigation system for consistent water pressure and flow. A noticeable drop in pressure or flow may indicate a clogged filter screen.

6. Manteniment

Regular cleaning of the filter screen is crucial to maintain optimal performance and extend the life of your irrigation system. The frequency of cleaning will depend on the water quality in your area.

Tanqueu el subministrament d'aigua: Before performing any maintenance, turn off the main water supply to the filter.
Remove Flush Cap: Unscrew the flush cap at the bottom of the Y filter housing. This will allow any accumulated debris to drain out.
Remove Filter Screen: Carefully unscrew the main body of the filter housing to access and remove the 155-mesh polyester screen.
Pantalla neta: Rinse the screen thoroughly under running water to remove all trapped debris. For stubborn deposits, a soft brush can be used. Do not use harsh chemicals or abrasive materials that could damage the screen.
Inspeccionar components: Check the screen for any tears or damage. Inspect the O-rings and seals for wear. Replace if necessary.
Torneu a muntar: Insert the clean screen back into the filter housing. Screw the main body back onto the filter head, ensuring a snug fit. Replace the flush cap.
Restaurar el subministrament d'aigua: Obriu lentament el subministrament d'aigua i comproveu si hi ha fuites.

Recommended cleaning frequency: Inspect the screen monthly, or more frequently if you notice a drop in water pressure or flow from your irrigation system.

7. Solució De Problemes

Problema	Causa possible	Solució
Low water pressure or flow from irrigation system.	Filtre de malla obstruït.	Clean the filter screen as described in the Maintenance section.
Water leaking from filter connections.	Loose connections or damaged O-rings/seals.	Tighten connections. Inspect and replace O-rings/seals if damaged. Ensure thread sealant tape (PTFE tape) is used if necessary.
Water leaking from flush cap.	Loose flush cap or damaged O-ring.	Tighten flush cap. Inspect and replace O-ring if damaged.
Filter housing appears damaged.	Excessive water pressure or physical impact.	Ensure operating pressure does not exceed 120 PSI. Replace the filter if damaged.

8. Especificacions

Model: P09-155
Marca: DIG
Mida de la connexió: 3/4" FHT x MHT
Screen Mesh Size: 155 Malla
Material de la pantalla: Polièster
Filtration Surface Area: 14.9 polzades quadrats
Pressió màxima de funcionament: 120 PSI
Caudal: Up to 13 GPM (780 gallons per hour)
Pes de l'article: 7.04 unces
Components inclosos: Poly screen & flush cap

9. Informació de la garantia

Specific warranty details for the DIG P09-155 Inline Y Filter are not provided within this manual. For warranty claims or information, please refer to the product packaging or contact DIG customer support directly.

10. Atenció al client

For technical assistance, replacement parts, or further inquiries regarding your DIG P09-155 Inline Y Filter, please visit the official DIG weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. La informació de contacte normalment es troba a l'embalatge del producte o al fabricant. weblloc.

DIG P09-155