Introducció
Thank you for choosing the Fenge 2-Tier Wooden Monitor Stand. This product is designed to enhance your workspace by providing an ergonomic monitor height and efficient storage solutions. Its 2-tier design with integrated drawers helps organize your desktop, creating a cleaner and more productive environment. The stand also promotes a better posture by elevating your monitor to an optimal viewnivell.
Pautes de seguretat
- Ensure the monitor stand is placed on a stable, level surface to prevent tipping.
- No supereu la capacitat de càrrega màxima de 25 kg (55 lliures).
- Mantingueu les peces petites allunyades dels nens durant el muntatge.
- Avoid exposing the stand to excessive moisture or direct heat sources.
- Regularly check all connections and components to ensure they remain secure.
Contingut del paquet
Si us plau, comproveu que tots els components siguin presents abans de començar el muntatge:
- 1x Main Wooden Board (90cm x 23.5cm)
- 2x Fabric Drawers
- 4x Non-slip Pads
- Maquinari de muntatge (cargols, eines si escau)
Muntatge i muntatge
The Fenge monitor stand requires simple assembly. Follow these steps for proper setup:
- Preparar la base: Desembaleu amb cura tots els components i col·loqueu-los sobre una superfície neta i suau per evitar ratllades.
- Attach Non-slip Pads: Locate the four non-slip pads. Peel off the adhesive backing and firmly attach one pad to each corner on the underside of the monitor stand's base. These pads provide stability and protect your desk surface.
- Assemble the Structure: If the stand's frame is not pre-assembled, follow the included diagram to connect the side supports to the main wooden board using the provided hardware. Ensure all screws are tightened securely but do not overtighten.
- Inserir calaixos: Slide the two fabric drawers into their designated slots on the lower tier of the stand.
- Col·loca el suport: Col·loqueu el suport de monitor muntat a l'escriptori a la ubicació desitjada.
- Place Your Monitor: Carefully place your monitor on the top surface of the stand. Ensure it is centered and stable.

Instruccions de funcionament
The Fenge monitor stand is designed for intuitive use to maximize your desk space and comfort.
- Col·locació del monitor: Place your monitor(s) on the top surface. The stand is designed to support various monitor sizes and can even accommodate dual monitor setups within its 90cm width.
- Keyboard and Mouse Storage: Utilize the open space beneath the top tier to neatly store your keyboard, mouse, and other peripherals when not in use, freeing up valuable desk space.
- Organització dels calaixos: Use the two integrated fabric drawers to store office supplies, cables, small gadgets, and personal items. This keeps your desktop clutter-free and your essentials within easy reach.
- Posicionament ergonòmic: The 14.2cm height of the stand helps elevate your monitor to eye level, promoting a more ergonomic posture and reducing strain on your neck and shoulders during long working hours.


Cura i Manteniment
To ensure the longevity and appearance of your Fenge monitor stand, follow these simple care instructions:
- Neteja: Netegeu les superfícies de fusta amb un drap suauamp cloth. For stubborn stains, use a mild wood cleaner. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Vessaments: Immediately wipe up any spills to prevent water damage or staining, as the MDF material is resistant but not impervious to prolonged liquid exposure.
- Pols: Netegeu regularment el suport amb un drap sec i suau per evitar l'acumulació de pols.
- Cura del calaix: The fabric drawers can be spot cleaned with a damp cloth and mild soap if necessary. Allow them to air dry completely before reinserting.
- Eviteu la llum solar directa: L'exposició prolongada a la llum solar directa pot causar decoloració o esvaïment de l'acabat de la fusta.
Resolució de problemes
If you encounter any issues with your Fenge monitor stand, please refer to the following common problems and solutions:
- El suport és inestable:
- Assegureu-vos que tots els cargols de muntatge estiguin ben apretats.
- Verify that the non-slip pads are securely attached and the stand is on a flat surface.
- Check that the weight placed on the stand does not exceed the maximum load capacity.
- Els calaixos s'encallen o no llisquen suaument:
- Ensure the drawers are inserted correctly and are not overloaded.
- Check for any obstructions within the drawer slots.
- Danys durant l'enviament:
- If any parts are damaged upon arrival, please contact customer support immediately for assistance.
Especificacions del producte
| Característica | Detall |
|---|---|
| Marca | Fenge |
| Color | marró |
| Material | Junta de MDF |
| Dimensions del producte (LxWxH) | 90 x 23.5 x 14.2 cm (35.4 x 9.3 x 5.6 polzades) |
| Pes del producte | Aprox. 4.5 kg (9.9 lliures) |
| Pes del paquet | 6.2 kg (13.7 lliures) |
| Capacitat de càrrega màxima | 25 kg (55 lliures) |
| Muntatge obligatori | Sí |

Garantia i assistència al client
This Fenge monitor stand comes with a Garantia de qualitat de 12 mesos des de la data de compra. Aquesta garantia cobreix defectes de fabricació i defectes de materials en condicions d'ús normal.
If you have any questions, require assistance with assembly, or need to report a defect, please contact our customer support team. Provide your purchase details and a description of the issue for prompt service.
Contacte d'assistència al client:
Please refer to your purchase platform or the Fenge official weblloc web per obtenir la informació de contacte més actualitzada.