ssontong CABE OBD Power Cable for Dash Camera User Manual

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your ssontong CABE OBD Power Cable and accompanying Dash Camera. Please read this manual thoroughly before use to ensure proper functionality and safety.

Producte acabatview

Contingut del paquet

• ssontong CABE OBD Power Cable (Type-C output)
• Dash Camera (Front only)
• Targeta de memòria de 32 GB
• Muntatge de la ventosa
• Lector de targetes USB
• Eina de palanca d'instal·lació
• Clips de cable

Figura 1: Complete ssontong CABE OBD Power Cable and Dash Camera kit, including the OBD power cable, dash camera, 32GB memory card, and installation accessories.

Característiques clau

• Àmplia compatibilitat: Compatible with vehicles featuring OBD or OBD2 ports, and Type-C USB devices.
• Dual Work Modes: ACC mode (ignition-controlled) and Monitor mode (24-hour continuous power).
• Volum baixtage Protecció: Automatically cuts power below 11.7V to protect the car battery.
• Instal·lació Plug and Play: Simple connection to the vehicle's OBD2 port.
• Dash Camera Features: 1080FHD recording, 170° wide-angle lens, WDR technology, G-sensor, Loop Recording, Parking Monitoring.

Configuració

1. Locate the OBD Port

The OBD (On-Board Diagnostics) port is typically located under the dashboard on the driver's side, often near the steering column or center console. Refer to your vehicle's manual if you have difficulty locating it.

Figura 2: Common locations for the OBD or OBD II port within a vehicle's interior, typically found under the dashboard.

2. Install the Memory Card

Insert the provided 32GB memory card into the designated slot on the dash camera. Ensure it is inserted correctly until it clicks into place.

3. Mount the Dash Camera

Attach the suction cup mount to the dash camera, then secure the camera to your vehicle's windshield. Position it to ensure a clear view of the road ahead without obstructing your driving visibility.

Figura 3: The dash camera unit with its suction cup mount, ready for installation on the windshield.

4. Connect the OBD Power Cable

1. Plug the OBD connector of the power cable into your vehicle's OBD port.
2. Connect the Type-C USB end of the power cable to your dash camera.
3. Use the provided pry tool and cable clips to neatly route and secure the cable along the vehicle's interior trim, ensuring it does not interfere with driving controls.

Figura 4: The ssontong CABE OBD power cable, showing the Type-C output and the mode selection switch.

Instruccions de funcionament

OBD Power Cable Modes

The OBD power cable features a switch to select between two operating modes:

• Mode "O" (ACC Mode):
  • Power output begins when the car is ignited.
  • Power supply automatically stops 20 minutes after the car is turned off.
  • Ideal for standard driving recording.
• Mode "-" (Monitor Mode):
  • Continuously supplies power for 24 hours.
  • Maintains operation until the car battery voltage drops below 11.7V, at which point power is automatically cut off to prevent battery drain.
  • Suitable for continuous parking monitoring.

Dash Camera Functions

• Sensor G: Detects sudden impacts or collisions. When triggered, the current video segment is automatically locked and protected from being overwritten during loop recording.
• Enregistrament en bucle: The camera continuously records. When the memory card is full, the oldest unlocked video files are automatically overwritten by new recordings. Locked videos are not overwritten.
• Supervisió del pàrquing: When the vehicle is parked, the dash camera can detect impacts and automatically begin recording, providing 24-hour surveillance when the OBD power cable is in Monitor Mode.

Figura 5: Visual explanation of the G-sensor, Loop Recording, and Parking Monitoring functionalities of the dash camera.

Advanced Dash Camera Features

• Lent gran angular de 170°: Ofereix un ampli camp de view, covering multiple lanes of traffic to reduce blind spots.
• Tecnologia WDR: Wide Dynamic Range technology enhances video quality in varying light conditions, ensuring clear recordings in both bright and dark environments.
• Visió nocturna: Equipped with a Sony Sensor, 6-Glass Lens, and F1.8 Aperture for improved clarity in low-light conditions, capturing details like license plates more effectively.

Figura 6: L'objectiu gran angular de 170 graus captura una àmplia view of the road, monitoring multiple lanes of traffic.

Figura 7: Demonstration of WDR (Wide Dynamic Range) technology, showing improved image clarity in conditions that are either too bright or too dark.

Figura 8: Key components contributing to the dash camera's super night vision, including a Sony Sensor, 6-Glass Lens, and F1.8 Aperture.

Manteniment

• Neteja: Use a soft, dry cloth to clean the dash camera lens and screen. Avoid abrasive cleaners.
• Targeta de memòria: Periodically format the memory card (e.g., once a month) within the dash camera settings to ensure optimal performance and prevent data corruption. Back up any important videos before formatting.
• Inspecció del cable: Regularly check the OBD power cable for any signs of wear or damage.

Resolució de problemes

Especificacions

Garantia i Suport

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ssontong weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.