1. Introducció
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your CIPU 0.35HP Pool Pump with Timer, Model CSPP717. This pump is designed for water circulation in above-ground swimming pools, hot tubs, and spas, offering stable performance, low noise, and energy efficiency. Please read this manual thoroughly before installation and use, and retain it for future reference.
2. Informació de seguretat
ADVERTIMENT: To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Always disconnect power before servicing or cleaning the pump.
- Ensure the pump is installed on a solid, level surface to prevent vibration and noise.
- Do not operate the pump dry. Ensure the pump is primed with water before starting.
- All electrical connections must be performed by a qualified electrician and comply with local codes.
- The power cord is 6 feet long. Do not use extension cords.
- Protect the pump from direct sunlight and extreme weather conditions.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- CIPU 0.35HP Pool Pump with Filter Basket and Timer
- 2 x Hose Adapters (for 1-1/4" and 1-1/2" hoses)
- Manual d'instruccions
4. Producte acabatview
Figura 4.1: The CIPU 0.35HP Pool Pump, showing the main unit, transparent filter basket cover, and included hose adapters.
Figura 4.2: Primer pla view of the pump's control panel, featuring the ON/OFF button, Timer button, Timer indicator lights (2h, 4h, 6h, 8h, 10h, 12h, 16h, 24h), and a Single Cycle indicator.
Figura 4.3: Diagram illustrating the product dimensions (16.5 inches L x 5.9 inches W x 9.2 inches H) and the included 1-1/4 inch and 1-1/2 inch hose adapters, along with the 6-foot power cord.
5. Especificacions
| Característica | Especificació |
|---|---|
| Model | CSPP717 |
| Potència (HP) | 0.35 CV |
| Voltage | 115 Volts |
| Freqüència | 60 Hz |
| Ampedat | 3.6 Amps |
| Caudal màxim | 45 galons per minut (2700 GPH) |
| Cap total màxim | 10 peus |
| Dimensions del producte (L x A x A) | 16.5" x 5.9" x 9.2" |
| Pes de l'article | 11 lliures |
| Material | Plàstic |
| Font d'alimentació | Elèctric |
6. Configuració i instal·lació
This pump is designed for easy installation with above-ground pool filter systems. It includes adapters for common hose sizes.
Figura 6.1: Examples of the CIPU pool pump installed with a sand filter system (left) and a cartridge filter system (right).
- Col·locació: Position the pump on a stable, level surface near your pool and filter system. Ensure it is protected from direct weather exposure.
- Connexió de la mànega:
- Identify the correct adapter for your pool hoses (1-1/4" or 1-1/2").
- Attach the adapters to the pump's inlet and outlet ports. Ensure a tight seal.
- Connect your pool hoses to the adapters. Use thread tape and ensure the included flat rubber gaskets are properly seated to prevent leaks.
- Cebada de la bomba: Before starting the pump, ensure it is filled with water. This is crucial to prevent dry running and damage to the motor.
- Connexió elèctrica: Plug the 6-foot power cord into a grounded 115V electrical outlet. Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI).
7. Instruccions de funcionament
The CIPU pool pump features a user-friendly control panel with timer functions.
Figura 7.1: The pump's control panel, showing the ON/OFF button, Timer button, and various timer indicator lights.
7.1 Mode continu
- After connecting the pump to power, the default setting is 24 hours continuous operation (the 24h indicator light will flash).
- To set a desired operation period, press the Botó del temporitzador. The indicator lights will cycle through 2h, 4h, 6h, 8h, 10h, 12h, 16h, and 24h. Select your desired duration.
- Premeu el botó Botó ON/OFF to start the pump. The pump will run for the selected time period indicated by the illuminated timer light.
7.2 Single Cycle Mode
- To activate Single Cycle Mode, press and hold the Botó del temporitzador for more than ten seconds. The 'Single Cycle' indicator light will flash.
- In Single Cycle Mode, after pressing the Botó ON/OFF, the pump will operate for the set time and then stop. It will not restart automatically until the power supply is reconnected or the mode is changed.
- To change the setting time within Single Cycle Mode, press the Botó del temporitzador to cycle through the available durations (2h, 4h, 6h, 8h, 10h, 12h, 16h, 24h).
8. Manteniment
Regular maintenance ensures the longevity and efficient operation of your pool pump.
8.1 Neteja de la cistella del filtre
Figura 8.1: The detachable filter basket, designed to collect debris such as leaves, hair, and grit, making it easy to check and clean.
- The pump is equipped with a transparent cover, allowing you to visually inspect the filter basket.
- When the basket appears full of debris (leaves, hair, coarse particles), it needs cleaning.
- Before cleaning, always disconnect the pump from the power supply.
- Remove the transparent cover and lift out the filter basket.
- Empty the debris and rinse the basket thoroughly with water.
- Reinsert the clean basket and secure the transparent cover tightly.
8.2 Neteja general
- Netegeu l'exterior de la bomba amb anunciamp tela segons sigui necessari.
- No utilitzeu productes químics ni productes de neteja abrasius.
9. Solució De Problemes
Si teniu problemes amb la bomba, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| La bomba no arrenca | No power; tripped GFCI; motor overload; timer setting. | Check power connection and GFCI. Reset if tripped. Ensure timer is set correctly. If motor is hot, allow to cool. |
| Baix cabal d'aigua | Clogged filter basket; air leak in suction line; pump not primed; restricted plumbing. | Clean filter basket. Check all connections for air leaks. Ensure pump is properly primed. Inspect hoses for kinks or blockages. |
| La bomba és sorollosa | Air in system; cavitation; debris in impeller; improper installation. | Bleed air from the system. Ensure adequate water supply. Check for debris in the impeller (disconnect power first). Verify pump is on a stable surface. |
| Fuites d'aigua de les connexions | Loose connections; damaged O-rings/gaskets; incorrect adapter use. | Tighten all connections. Inspect and replace any damaged O-rings or gaskets. Ensure correct adapters are used and properly seated. |
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb l'atenció al client.
10. Garantia i Suport
CIPU provides a Garantia de 12 mesos sense preocupacions des de la data de compra. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.
For warranty claims, technical assistance, or any questions regarding your CIPU pool pump, please contact CIPU customer support through the retailer where the product was purchased or visit the official CIPU weblloc per obtenir informació de contacte.
Please have your model number (CSPP717) and proof of purchase ready when contacting support.