1. Instruccions de seguretat importants
Please read and understand all safety warnings and instructions before operating this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Always wear eye protection and appropriate protective clothing when operating the strimmer.
- Keep children and bystanders at a safe distance (at least 15 meters) from the operating area.
- Do not operate the strimmer in wet conditions or rain.
- Inspect the work area for objects that could be thrown or entangled in the cutting line/blade. Remove any debris.
- Assegureu-vos que la bateria estigui completament carregada abans d'utilitzar-la i traieu-la quan no estigui en ús o durant el manteniment.
- Never modify the strimmer or use non-approved attachments.
- Store the strimmer and batteries in a dry, secure location away from children.
For detailed safety information, refer to the complete safety manual provided with your product.
2. Contingut del paquet
Carefully unpack all items and ensure you have received all components listed below. If any parts are missing or damaged, contact customer support.
- Cordless Strimmer Unit
- 2 bateries de ions de liti de 21 V i 4000 mAh
- Carregador de bateria
- Mànec auxiliar
- Guàrdia protectora
- Auxiliary Wheels
- Nylon Saw Blades (x10)
- Steel Wire Ropes (x2)
- Metal Saw Blades (x2)
- Metal Circular Saw Blade (x1)
- Ulleres de seguretat
- Guants
- Clau anglesa
3. Muntatge
Follow these steps to assemble your Conentool Cordless Strimmer:
- Attach the Protective Guard: Align the protective guard with the mounting points on the strimmer head and secure it using the provided fasteners. Ensure it is firmly attached to prevent debris from being thrown towards the user.
- Instal·leu la nansa auxiliar: Slide the auxiliary handle onto the main shaft. Adjust its position for comfortable operation and tighten the handle adjustment button to secure it.
- Attach the Auxiliary Wheels: If desired, attach the auxiliary wheels to the strimmer head. These wheels provide support and ease of movement during operation, especially for edging or larger areas.
- Introduïu la bateria: Ensure the battery is charged. Slide the battery into the battery compartment on the strimmer handle until it clicks into place.
4. Funcionament
4.1 Càrrega de la bateria
Connect the charger to a power outlet and then to the battery. The indicator light on the charger will show the charging status. A full charge typically takes approximately 2-3 hours. Each 4000mAh battery can provide over 90 minutes of continuous operation.
4.2 Adjusting Strimmer Length and Head Angle
The strimmer features an adjustable telescoping rod and a rotating head for versatile use.
- Ajust de longitud: Press the telescoping rod adjustment button and extend or retract the shaft to your desired length (from 90cm/35.4in to 125cm/49.2in). Release the button to lock the length.
- Ajust de l'angle del capçal: Press the head adjustment button near the strimmer head to rotate the head up to 90 degrees. This allows for easy edging and trimming in various orientations.
4.3 Blade Selection and Replacement
The strimmer supports multiple blade types for different cutting tasks:
- Nylon Saw Blades: Ideal for light grass and soft weeds.
- Steel Wire Ropes: Suitable for thicker grass and tougher weeds.
- Metal Saw Blades: For dense brush and small woody stems.
- Metal Circular Saw Blade: Best for heavy-duty cutting of thick brush and small saplings.
To replace a blade, ensure the battery is removed. Use the provided wrench to loosen the retaining nut, remove the old blade, install the new blade, and tighten the nut securely.
4.4 Inici i aturada
To start the strimmer, press the circuit breaker button and then the start switch. To stop, release the start switch.
5. Manteniment
Regular maintenance ensures optimal performance and extends the life of your strimmer.
- Neteja: After each use, remove the battery and clean the strimmer head, guard, and housing with a damp cloth. Remove any grass, dirt, or debris. Do not use harsh chemicals or abrasive cleaners.
- Inspecció de la fulla: Regularly inspect blades for wear, damage, or dullness. Replace worn or damaged blades immediately to maintain cutting efficiency and safety.
- Cura de la bateria: Store batteries in a cool, dry place. Do not expose them to extreme temperatures. Charge batteries fully before long-term storage and recharge every 3-6 months to maintain battery health.
- Emmagatzematge: Store the strimmer in a dry, secure location, out of reach of children. Remove the battery before storage.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Strimmer does not start | La bateria no s'ha inserit correctament Bateria descarregada Interruptor de seguretat no activat | Assegureu-vos que la bateria estigui completament col·locada Carregueu la bateria Press circuit breaker before start switch |
| Rendiment de tall reduït | Fulla apagada o danyada Fulla incorrecta per al material | Substituïu la fulla Select appropriate blade type |
| Vibració excessiva | Fulla danyada o desequilibrada Components solts | Substituïu la fulla Reviseu tots els elements de fixació i apreteu-los |
7. Especificacions
- Marca: Conentool
- Número de model: D1003
- Font d'alimentació: Funciona amb bateria
- Tipus de bateria: 21V Lithium Ion (2 x 4000mAh included)
- Potència del motor: 650 W MÀX
- Velocitat sense càrrega: 8500 RPM
- Dimensions del producte: 34.65" de llargada x 6.3" d'amplada (longitud ajustable fins a 49.2")
- Pes de l'article: 8.01 lliures
- Color: Negre
8. Garantia i Suport
For warranty information or technical support, please refer to the documentation included with your purchase or contact Conentool customer service directly. Keep your purchase receipt as proof of purchase.