1. Introducció
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E3 Dual Motor Electric Standing Desk. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Informació important de seguretat
To prevent injury and ensure optimal performance, please adhere to the following safety guidelines:
- Always ensure the desk is properly assembled and stable before use.
- No supereu el límit màxim de pes de 220 lliures (100 kg).
- Be cautious when adjusting the desk height to avoid injury from pinching or crushing. Ensure no objects or body parts are in the path of the moving desk.
- Mantingueu els nens i les mascotes allunyats de l'escriptori durant el funcionament.
- No us asseieu ni us poseu drets a l'escriptori.
- Feu servir només l'adaptador de corrent i els components proporcionats.
- If any unusual noise or movement occurs, immediately stop operation and unplug the desk.
3. Muntatge i muntatge
The FLEXISPOT E3 desk requires assembly. It typically arrives in two separate packages. While the lower frame assembly is straightforward, the desktop may require drilling approximately 20 holes for secure attachment. It is recommended to have two people for assembly due to the weight of the components.
3.1. Contingut del paquet
Verify that all components are present before beginning assembly. Refer to the included assembly guide for a complete list of parts.
3.2. Passos de muntatge
- Desembaleu tots els components i col·loqueu-los sobre una superfície neta i tova per evitar ratllades.
- Assemble the desk frame according to the detailed instructions provided in the separate assembly guide.
- Attach the desktop to the assembled frame. Ensure proper alignment before securing with screws. Note that pre-drilled holes may not be present on the desktop, requiring careful drilling.
- Connect the control panel and power cables as instructed.
- Place the desk in its desired location, ensuring it is level and stable.
4. Instruccions de funcionament
The FLEXISPOT E3 desk features a dual-motor system for smooth and quiet height adjustments, controlled by a programmable panel.
4.1. Tauler de control acabatview
The control panel allows you to raise or lower the desk and save preferred height positions.
- Up/Down Arrows (↑ / ↓): Press and hold to continuously adjust the desk height. Release to stop at the desired level.
- Preajustos de memòria (1, 2, 3, 4): These buttons allow you to save and recall up to four custom height settings.
4.2. Configuració de preajustos de memòria
- Ajusteu l'escriptori a l'alçada desitjada utilitzant les fletxes amunt/avall.
- Press the 'M' or 'Set' button (if available, or follow specific instructions for your panel) followed by one of the number buttons (1, 2, 3, or 4). The display may flash or beep to confirm the setting is saved.
- To recall a saved height, simply press the corresponding number button. The desk will automatically move to that preset height.
4.3. Dual Motor Operation
The E3 desk is equipped with dual motors, providing seamless and silent operation (under 50 dB). This design allows for a higher weight capacity and smoother transitions between sitting and standing positions.
4.4. Capacitat de pes
The desk is engineered to support up to 220 lliures (100 kg), providing a sturdy and reliable workstation for various tasks and equipment.
4.5. Sistema anticol·lisió
The desk is equipped with an anti-collision system that detects resistance during height adjustment. If an obstacle is encountered, the desk will automatically stop and reverse slightly to prevent damage or injury.
5. Manteniment
Un manteniment regular garanteix la longevitat i el rendiment òptim del vostre escriptori de peu.
- Neteja: Netegeu l'escriptori i el marc amb un drap suauamp drap. Eviteu productes químics agressius o netejadors abrasius que puguin danyar l'acabat.
- Gestió de cables: Periodically check and organize cables to prevent tangles and ensure they do not interfere with the desk's movement.
- Elements de fixació: De tant en tant, comproveu tots els cargols i perns per assegurar-vos que estiguin ben ajustats. Torneu-los a apretar si cal.
- Inspecció de motors: Ensure the motor and electrical connections are free from dust and debris. Do not attempt to open the motor housing.
6. Solució De Problemes
If you encounter issues with your FLEXISPOT E3 desk, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| L'escriptori no es mou ni respon als controls. | Power cable disconnected, circuit breaker tripped, control panel malfunction. | Check all cable connections. Ensure the power outlet is functional. Try unplugging and replugging the desk after 30 seconds. |
| L'escriptori es mou de manera irregular o fa sorolls estranys. | Càrrega desigual, fixacions fluixes, obstrucció. | Assegureu-vos que el pes estigui distribuït uniformement. Comproveu i estrenyeu tots els elements de fixació del muntatge. Traieu qualsevol obstrucció. |
| Error codes displayed (e.g., ASR/E20). | Motor overload, sensor issue, or internal fault. | Unplug the desk for at least 10 minutes, then plug it back in. If the error persists, contact customer support. Avoid exceeding the weight limit. |
| El sistema anticol·lisió s'activa amb freqüència. | Obstruction, sensitive setting. | Ensure there are no objects in the desk's path. Refer to the full manual for instructions on adjusting anti-collision sensitivity if available. |
If the problem persists after attempting these solutions, please contact FLEXISPOT customer support for further assistance.
7. Especificacions
| Característica | Detall |
|---|---|
| Marca | FLEXISPOT |
| Model | E3 |
| Dimensions del producte | 55.1 "P x 27.5" W x 27.6" H |
| Color | White Frame + White Top |
| Estil | Modern |
| Material base | Metall |
| Tipus de material superior | Fusta |
| Tipus d'acabat | Fusta |
| Característica especial | Cordat |
| Acabat de mobles | Blanc |
| Mida | 55"x28" Whole-piece |
| Components inclosos | Keyboard Tray, Monitor Arm (Note: Components may vary by package) |
| UPC | 840460427586 |
| Item Height (Adjustable Range) | 27.6 inches (Min) to 46.8 inches (Max) |
| Recomanació de pes màxim | 220 lliures (100 kg) |
| Muntatge requerit | Sí |
| Tipus de motor | Motor dual |
| Nivell de soroll | Menys de 50 dB |
8. Garantia i Suport
FLEXISPOT provides comprehensive warranty coverage for your peace of mind:
- Cobertura de 5 anys: Applies to the desk frame and motor.
- Cobertura de 2 anys: Applies to the control panel and other electronics.
For any assistance, warranty claims, or technical support, please contact FLEXISPOT customer service. Refer to your purchase documentation or the official FLEXISPOT weblloc per obtenir dades de contacte.