Introducció
The avedio links USB 2.0 Extender allows you to extend USB signals up to 164 feet (50 meters) over a single Cat6 or Cat7 Ethernet cable. This device is designed to provide reliable, high-speed USB 2.0 connectivity for various peripherals over long distances, overcoming the typical limitations of standard USB cables. It features four USB 2.0 ports on the receiver unit and supports Power over Cable (POC) technology, simplifying installation by requiring power only at the receiver.
Contingut del paquet
Si us plau, verifiqueu que tots els elements siguin presents al vostre paquet:
- 1 x Sender Unit
- 1 x Unitat receptora
- 1 x adaptador d'alimentació DC 5V
- 1 x cable USB 2.0
- 1 x Manual d'usuari

Figura 1: Contingut del paquet
Característiques del producte
- Extended Transmission: Transmits USB 2.0 signals up to 164 feet (50 meters) using a single Cat6 or Cat7 Ethernet cable.
- Múltiples ports USB: Equipped with 4 USB 2.0 ports on the receiver for connecting multiple devices simultaneously. Supports 480Mbps high-speed transmission.
- Power over Cable (POC): Only the receiver unit requires a DC 5V power adapter, as power is supplied to the sender unit via the Ethernet cable. This simplifies installation and reduces cable clutter.
- Built-in ESD Protection: Integrated electrostatic discharge protection enhances product reliability and extends service life by preventing damage from static electricity.
- Àmplia compatibilitat: Compatible with Windows 7/8/10/11 (32/64 bit) and Mac OS 10.12 and above. Supports various USB devices such as mice, keyboards, printers, cameras, USB flash drives, and more.
- Disseny durador: Features a rugged metal shell for better heat dissipation and interference prevention.

Figure 2: 164ft/50m Transmission

Figure 3: 4 USB 2.0 Output Ports

Figure 4: Power Over Cable (POC)

Figure 5: ESD Protection
Instruccions de configuració
Follow these steps to set up your avedio links USB 2.0 Extender:
- Connect the Sender Unit: Connect the provided USB 2.0 cable from your computer (PC/Laptop) to the "USB IN" port on the Sender unit.
- Connecteu el cable Ethernet: Connect a high-quality Cat6 or Cat7 Ethernet cable (up to 164ft/50m) between the "CAT6" port on the Sender unit and the "CAT6" port on the Receiver unit. It is recommended to use a shielded Ethernet cable according to the RJ45 568B standard for optimal performance.
- Connect Power to Receiver: Plug the DC 5V power adapter into the "DC 5V" port on the Receiver unit, then connect the adapter to a power outlet. Due to POC technology, the Sender unit will receive power through the Ethernet cable.
- Connecteu els perifèrics USB: Connect your USB devices (e.g., keyboard, mouse, printer, camera, USB flash drive) to the "USB OUT" ports on the Receiver unit.

Figura 6: Diagrama de connexió
Instruccions de funcionament
The avedio links USB 2.0 Extender is designed for plug-and-play operation, requiring no driver installation. Once all connections are made as described in the setup section, the system should function automatically.
- Assegureu-vos que tots els cables estiguin ben connectats.
- The extender supports hot-swapping of USB devices.
- For optimal performance, it is recommended to use USB 2.0 cables within 5 meters for connecting peripherals to the receiver.
This extender is suitable for various applications:

Figure 7: Wide Application Scenarios
- Vigilància de seguretat: Connect USB cameras remotely to a computer for real-time monitoring.
- Office/Entertainment: Connect keyboards, mice, gamepads, printers, and other USB devices for extended reach in office or home entertainment setups.
- Video Conferencing & Multimedia Classrooms: Facilitate remote connections for USB microphones, cameras, and other peripherals.

Figure 8: Security Surveillance Application
Manteniment
To ensure the longevity and optimal performance of your avedio links USB 2.0 Extender, consider the following maintenance tips:
- Keep the units in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.
- Avoid exposing the units to water or excessive moisture.
- Clean the units with a soft, dry cloth. Do not use liquid or aerosol cleaners.
- Ensure all cable connections are firm and free from damage.
- Periodically check the Ethernet cable for any signs of wear or damage, especially if it is run through high-traffic areas.
Resolució de problemes
If you encounter issues with your USB Extender, please refer to the following common troubleshooting steps:
- No Device Detection / Intermittent Connection:
- Comproveu els cables: Ensure all USB and Ethernet cables are securely connected to their respective ports on both the sender and receiver units, and to the computer and peripherals.
- Ethernet Cable Quality: The quality of the Cat6/7 Ethernet cable is crucial, especially for longer distances. Poor quality or unshielded cables can lead to signal degradation. Try using a known good, high-quality, shielded Cat6 or Cat7 cable.
- Font d'alimentació: Verify that the DC 5V power adapter is correctly connected to the receiver unit and plugged into a working power outlet. The receiver unit must be powered for the system to operate.
- Longitud del cable USB: Ensure the USB 2.0 cable connecting peripherals to the receiver is within the recommended length (typically 5 meters or less).
- Prova amb diferents dispositius: Try connecting different USB devices to the extender to rule out issues with a specific peripheral.
- Llums LED intermitents: Some users have reported flashing red LED lights on the units. While this may indicate activity, if it's accompanied by connection issues, re-check all connections and power. If the device functions correctly despite the flashing, it may be normal operational indication.
- Problemes de compatibilitat: Ensure your operating system (Windows 7/8/10/11, Mac OS 10.12+) and USB devices are compatible with USB 2.0 standards.
- Reinicieu els dispositius: Disconnect and reconnect the extender, then restart your computer and any connected USB devices.
Especificacions
| Marca | enllaços avedio |
| Número de model | USB2.0 Extender 164ft/50m |
| Distància de transmissió | Up to 164ft (50m) over Cat6/7 cable |
| Estàndard USB | USB 2.0 (Backward compatible) |
| Velocitat de dades USB | 480 Mbps |
| Number of USB Ports (Receiver) | 4 x USB 2.0 |
| Font d'alimentació | DC 5V (Receiver only, POC supported) |
| Compatibilitat de sistemes operatius | Win7/8/10/11 (32/64 bit), Mac OS 10.12 and above |
| Protecció ESD | Integrat |
| Material de l'habitatge | Metall |
| Pes de l'article | 0.37 kg |
Garantia i Suport
This avedio links product comes with a 1 any de garantia des de la data de compra.
For technical support, troubleshooting assistance, or warranty claims, please contact avedio links customer service through the retailer where the product was purchased or visit the official avedio links website for contact information. Please have your product model number and purchase details ready when contacting support.