CALEX 4301004300
CALEX Falerna Wall Lamp Manual d'instruccions
Model: 4301004300
Introducció
Thank you for choosing the CALEX Falerna Wall Lamp. This manual provides essential information for the safe and efficient use of your new wall lamp. The Falerna lamp features a sleek design with warm white up & down lighting, a rechargeable battery, wireless operation, dimming capabilities, and an integrated motion sensor. It is suitable for both indoor and outdoor use due to its IP44 waterproof rating.
Contingut del paquet
- 2x CALEX Falerna Wall Lamps
- 1x comandament a distància
- 2x USB-C Charging Cables (1.5m each)
- Mounting Materials (magnetic mounting plates, screws, wall plugs)
Informació de seguretat
- Manegeu sempre la lamp amb cura.
- Do not attempt to open or modify the lamp, as this will void the warranty and may cause damage or injury.
- Mantingueu la lamp away from extreme temperatures and direct sunlight during charging to prevent overheating.
- Feu servir només el cable USB-C proporcionat per carregar.
- Ensure the mounting surface is stable and can support the weight of the lamp.
- Dispose of batteries and electronic waste according to local regulations.
Configuració i instal·lació
The CALEX Falerna Wall Lamp is designed for quick and easy installation without the need for complex wiring. It features a magnetic mounting system.
1. Carregant la Lamp
Abans del primer ús, carregueu completament l'aparell.ampConnecteu el cable USB-C proporcionat al port de càrrega de l'auricular.amp and to a suitable USB power adapter (not included). A full charge takes approximately 6 hours and provides up to 8 hours of illumination.
2. Muntatge de la Lamp
- Choose a desired location for the lamp. Ensure the surface is clean and dry.
- Attach the magnetic mounting plate to the wall using the provided screws and wall plugs. For outdoor use, ensure the mounting is secure and weather-resistant.
- Alineeu la lamp with the mounted plate. The lamp will magnetically attach to the plate. This allows for easy removal for charging or repositioning.

Image: Installation of the Calex Falerna wall lamp using the magnetic mounting plate.

Image: The Calex Falerna wall lamp showing its integrated control buttons.
Instruccions de funcionament
The Falerna wall lamp can be operated using the integrated buttons or the included remote control.
Ús del comandament a distància

Image: Operating the Calex Falerna wall lamps with the remote control.
- ON/OFF: Premeu per girar la lamp encès o apagat.
- Mode: Cycles through different lighting modes (if available).
- '+' / '-': Adjust the brightness (dimming function).
- TIMER 1H / TIMER 2H: Estableix la lamp to turn off automatically after 1 or 2 hours.
Funcionalitat del sensor de moviment
The integrated motion sensor detects movement within a range of 2-5 meters and a detection angle of 90°. When motion is detected, the lamp will automatically illuminate and remain on for 30 seconds before turning off. This feature is ideal for security lighting at entrances or in gardens.
Nota: The motion sensor activates when the lamp is in an active state (not completely off). If the lamp is off, it will not react to motion. Ensure the lamp is switched on for the motion sensor to function.
Manteniment
The CALEX Falerna Wall Lamp requereix un manteniment mínim.
- Neteja: Netegeu la lamp amb un suau, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Cura de la bateria: Recarrega la lamp regularly to maintain battery health, especially if it will not be used for extended periods.
- Resistència a la intempèrie: The IP44 rating ensures the lamp is protected against splashing water from any direction. While suitable for outdoor use, avoid submerging the lamp a l'aigua.

Image: The Calex Falerna wall lamp demonstrating its IP44 waterproof rating.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Lamp no s'encén. | Battery is depleted. Lamp està apagat. | Carregar la lamp fully using the USB-C cable. Ensure the lamp is switched on via the remote or integrated button. |
| Motion sensor not activating. | Lamp is off. Obstruction in sensor's field of view. Sensor range exceeded. | Assegureu-vos que lamp is switched on. Clear any obstructions. Move closer to the lamp (within 2-5 meters). |
| Lamp does not hold charge. | Battery degradation. Improper charging. | Ensure the USB-C cable and power adapter are functioning correctly. If the issue persists after proper charging, contact customer support. |
| El comandament a distància no funciona. | Remote battery depleted. Obstruction between remote and lamp. | Replace the remote control battery. Ensure a clear line of sight to the lamp. |
Especificacions
| Número de model | 4301004300 |
| Marca | CALEX |
| Dimensions (L x A x A) | 8 x 8 x 8 cm |
| Pes | 725 g |
| Material | Alumini |
| Color | Negre |
| Font de llum | LED |
| Color clar | Blanc càlid (2700K) |
| Brillantor | 150 lúmens (màx.) |
| Wattage | 10 watts |
| Voltage | 3.7 Volts |
| Font d'alimentació | Bateria recarregable (2000 mAh) |
| Temps de càrrega | Aprox. 6 hores |
| Temps de funcionament | Fins a 8 hores |
| Nivell de resistència a l'aigua | IP44 (Resistent a l'aigua) |
| Característiques especials | Motion Sensor, Dimmable, Wireless, Remote Control |
| Interval del sensor de moviment | 2-5 metres |
| Angle del sensor de moviment | 90° |
| Tipus de muntatge | Suport de paret (magnètic) |

Image: Dimensions of the Calex Falerna wall lamp.

Image: Energy efficiency label for the Calex Falerna lamp. Per a més detalls, visiteu el Base de dades EPREL.
Garantia i Suport
Specific warranty details are not provided in this manual. Please refer to your purchase documentation or contact the retailer/manufacturer directly for warranty information and customer support. For general inquiries or technical assistance, please visit the official CALEX weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.



