1. Introducció
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Tridonic Linear Essence Series 43W Constant Current LED Driver. This driver is designed for US-based LED lighting applications, offering 0-10V dimming capabilities and a robust design for longevity.
2. Instruccions de seguretat
ADVERTIMENT: Risc de descàrrega elèctrica. La instal·lació i el manteniment només els ha de dur a terme personal qualificat. Desconnecteu l'alimentació abans de la instal·lació o el manteniment.
- Assegureu-vos que l'entrada voltage (120-277V AC) matches the driver's specifications.
- No supereu la potència màxima de sortida de 43 W.
- This device is UL Class 2 recognized and suitable for dry and damp ubicacions.
- The driver includes built-in protection against overload, short-circuit, no-load, and over-temperature conditions.
- Comply with all national and local electrical codes.
3. Producte acabatview
The Tridonic Linear Essence Series LED Driver is a compact unit featuring clearly labeled input, output, and dimming terminals, along with a selectable output current switch.
Figura 1: superior view of the Tridonic Linear Essence Series 43W LED Driver. The image displays the product label with specifications, input terminals (G, N, L), output terminals (+LED, -LED), 0-10V dimming terminals (0-10V+, 0-10V-), and a switch for selecting output current (915mA or 1000mA).
4. Configuració i instal·lació
4.1. Muntatge
Mount the LED driver in a suitable enclosure or fixture, ensuring adequate ventilation to prevent overheating. The driver is designed for dry and damp ubicacions.
4.2. Output Current Selection
Before wiring, select the desired output current using the switch located on the driver. Refer to Figure 1 for the switch location.
- Posició ON: 1000mA output current.
- 1a posició: 915mA output current.
Ensure the selected current matches the requirements of your LED module(s).
4.3. Instruccions de cablejat
All wiring must comply with local and national electrical codes. Use appropriate wire gauges for the current and voltage involved.
- Input Power (PRI): Connect the AC mains supply to the input terminals labeled G (Ground), N (Neutral), and L (Line). The driver accepts 120-277V AC, 50/60Hz.
- LED Output (SEC): Connect the LED module(s) to the output terminals labeled + LED i -LED. Observe correct polarity.
- Atenuació 0-10V: Connect your 0-10V dimmer control wires to the terminals labeled 0-10V+ i 0-10 V-. Ensure correct polarity for dimming functionality.
Refer to the product label (Figure 1) for a visual representation of the terminal block layout.
5. Instruccions de funcionament
5.1. Encès
Once all connections are secure and verified, restore power to the LED driver. The connected LED module(s) should illuminate.
5.2. Dimming Control
Use a compatible 0-10V dimmer to adjust the light output. The dimming range is typically 10% to 100%. Ensure your dimmer is properly connected to the 0-10V+ and 0-10V- terminals.
6. Manteniment
The Tridonic LED driver is designed for long-term, maintenance-free operation. However, periodic inspection is recommended.
- Ensure the driver is free from dust and debris, which can impede heat dissipation.
- Check wiring connections periodically for tightness and integrity.
- Do not attempt to open or repair the driver. Refer servicing to qualified personnel.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| LEDs do not illuminate. |
|
|
| LEDs flicker or dim erratically. |
|
|
| El conductor està calent al tacte. |
|
|
8. Especificacions
| Paràmetre | Valor |
|---|---|
| Número de model | LC 43/915-1000/50 0-10V fixC lp SNC UNV |
| Número d'article | 87500870 |
| Tipus | Controlador LED de corrent constant |
| Vol. d'oferta nominaltage (Uin) | 120-277V AC |
| Vol. ACtage Rang | 108-305V |
| Freqüència de xarxa | 50/60Hz |
| Max. Input Power (Pin) | 50W |
| Output Power (Pout) | 43 W (màx.) |
| Corrent de sortida (Iout) | Selectable: 915mA or 1000mA |
| Màx. Sortida Voltage (Uout) | 60V DC (30-47VDC operating range) |
| Interfície d'atenuació | 0-10V |
| Rang de regulació | 10-100% |
| Classificació IP | IP20 |
| Material de l'habitatge | Metall |
| Operating Temperature (tc) | Màx. 75°C |
| Dimensions (L x A x A) | 11.00" x 1.10" x 0.90" (279.4 mm x 27.9 mm x 22.9 mm) |
| Pes | 7.0 oz (198g) |
| Certificacions | UL 8750 SF3.1, FCC Part 15, DesignLights Consortium 4.3 |
| Vida nominal | Fins a 50,000 hores |
9. Garantia i Suport
9.1. Informació de la garantia
This Tridonic LED driver is backed by a 5-year warranty, covering defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.
9.2. Suport tècnic
For technical assistance or further inquiries, please contact Tridonic customer support or your authorized distributor. Do not attempt to service the unit yourself.