Audizio Toledo Premium HiFi Turntable User Manual

1. Instruccions de seguretat

Please read these safety instructions carefully before using your Audizio Toledo turntable. Keep this manual for future reference.

• Font d'alimentació: Connect the turntable only to a power supply of the type described in this manual or on the unit.
• Aigua i humitat: No utilitzeu aquest aparell a prop de l'aigua ni enamp ambients.
• Neteja: Netegeu només amb un drap sec.
• Ventilació: No bloquegeu cap obertura de ventilació. Instal·leu-ho d'acord amb les instruccions del fabricant.
• Calor: No instal·leu a prop de cap font de calor com ara radiadors, registres de calor, estufes o altres aparells (inclosos amplificadors) que produeixen calor.
• Protecció del cable d'alimentació: Eviteu que el cable d'alimentació sigui trepitjat o pessigat, especialment als endolls, els endolls i el punt on surten de l'aparell.
• Manteniment: Demaneu tot el servei a personal de servei qualificat. El manteniment és necessari quan l'aparell s'ha fet malbé d'alguna manera, com ara el cable d'alimentació o l'endoll està danyat, s'ha vessat líquid o han caigut objectes a l'aparell, l'aparell ha estat exposat a la pluja o la humitat, no funciona amb normalitat. , o s'ha deixat caure.

2. Contingut del paquet

Assegureu-vos que tots els elements siguin presents a la caixa:

• Audizio Toledo Turntable Unit
• Funda antipols
• Plat
• Mat de feltre
• Contrapès
• Adaptador de 45 RPM
• Adaptador d'alimentació
• Cable RCA
• Manual d'usuari (aquest document)
• Audio Technica Cartridge (pre-installed)

3. Configuració

3.1. Col·locació

Place the turntable on a firm, level surface away from direct sunlight, heat sources, and excessive vibration.

3.2. Instal·lació del plat i la corretja de transmissió

The Audizio Toledo turntable features a belt-drive system for stable rotation.

1. Col·loqueu amb cura el plat a l'eix central.
2. Locate the drive belt, which is usually pre-installed around the inner rim of the platter.
3. Using the red ribbon (if provided), gently pull the belt over the motor pulley. Ensure the belt is not twisted.
4. Remove the red ribbon once the belt is correctly positioned.
5. Col·loqueu la catifa de feltre a sobre del plat.

3.3. Counterweight Installation and Adjustment

The adjustable counterweight ensures optimal tracking force for the Audio Technica cartridge.

1. Slide the counterweight onto the rear of the tonearm.
2. With the stylus guard removed, carefully balance the tonearm so it floats freely and horizontally.
3. Once balanced, hold the counterweight steady and rotate the numbered ring to '0' (zero).
4. Rotate the entire counterweight (including the numbered ring) to the recommended tracking force for the Audio Technica cartridge (typically 3.5 grams for the ATN3600L stylus).

3.4. Instal·lació de la coberta antipols

Carefully place the dust cover onto the hinges at the rear of the turntable unit.

Imatge: The Audizio Toledo turntable with its protective dust cover open, showcasing the platter and tonearm. The dust cover helps protect the unit from dust and debris when not in use.

3.5. Connexions

The Audizio Toledo offers versatile connectivity options.

1. Potència: Connect the power adapter to the DC IN 12V port on the rear of the turntable and then to a wall outlet.
2. Sortida RCA: For wired connection to an amplifier or powered speakers, connect the RCA cable to the AUDIO OUT (R/L) ports on the rear of the turntable. Use the PHONO/LINE switch to select the appropriate output level for your ampmés viu.
3. Posada a terra: If experiencing hum, connect a grounding wire from the GND terminal on the turntable to the grounding terminal on your ampmés viu.
4. Sortida Bluetooth: To connect wirelessly to Bluetooth headphones or speakers, ensure the Bluetooth switch on the rear is set to 'ON'.

Imatge: Un detallat view of the rear panel of the Audizio Toledo turntable, highlighting the power input, RCA audio outputs (R/L), grounding terminal (GND), and the Bluetooth ON/OFF switch. This panel allows for both wired and wireless audio connections.

4. Funcionament

4.1. Reproducció d'un disc

1. Place a vinyl record on the felt mat on the platter.
2. Select the appropriate speed (33 or 45 RPM) using the speed selector switch. For 45 RPM records with a large center hole, use the included 45 RPM adapter.
3. Deixeu anar el braç clamp.
4. Aixequeu suaument el braç amb la palanca de cueing.
5. Col·loqueu el braç sobre la pista desitjada del disc.
6. Lower the cueing lever to slowly drop the stylus onto the record.
7. At the end of the record, the turntable may feature an auto-stop function. Manually lift the tonearm and return it to its rest position.

Imatge: Un de dalt a baix view of the Audizio Toledo turntable with a vinyl record spinning on the platter. The tonearm is positioned on the record, indicating active playback. The speed selector and pitch control knobs are visible on the right side of the unit.

Imatge: Un de dalt a baix view of the Audizio Toledo turntable illustrating compatibility with 7", 10", and 12" records. The image also highlights the two available speeds (33 and 45 RPM) and the pitch control for fine-tuning playback speed.

4.2. Bluetooth Output

To stream audio wirelessly:

1. Ensure the Bluetooth switch on the rear panel is set to 'ON'.
2. Activate Bluetooth pairing mode on your headphones or speaker.
3. The turntable will automatically search for and connect to the nearest Bluetooth device.

Imatge: The Audizio Toledo turntable wirelessly connected to a pair of Bluetooth headphones, demonstrating its Bluetooth OUT capability. This feature allows users to enjoy their vinyl collection through wireless audio devices.

4.3. Sortida RCA

For a wired connection to an external audio system:

1. Connect the RCA cable from the turntable's AUDIO OUT ports to the corresponding input on your amplifier o altaveus alimentats.
2. Set the PHONO/LINE switch on the turntable's rear panel according to your amplifier's input type. Use 'PHONO' if your amplifier has a dedicated phono input, or 'LINE' if it has a standard auxiliary input.

5. Manteniment

5.1. Neteja

• Turntable Unit: Netegeu la unitat amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
• stylus: Feu servir un raspall suau dissenyat per a la neteja del llapis òptic, raspallant suaument de darrere cap endavant.
• Funda antipols: Netejar amb un suau, damp tela. Eviteu productes químics agressius que puguin ratllar o enterbolir el plàstic.

5.2. Substitució del llapis òptic

The Audizio Toledo uses a replaceable Audio Technica cartridge. A worn stylus can damage your records and degrade sound quality. Replace the stylus after approximately 300-500 hours of playback.

1. Gently grasp the front of the cartridge and pull the old stylus assembly downwards and forwards to remove it.
2. Align the new stylus assembly with the cartridge body and push it upwards and backwards until it clicks into place.

Imatge: Un primer pla view of the Audio Technica cartridge and stylus on the tonearm of the Audizio Toledo turntable. This image highlights the precision component responsible for reading the grooves of a vinyl record, ensuring high-quality audio reproduction.

6. Solució De Problemes

7. Especificacions

Imatge: The Audizio Toledo turntable with its dimensions indicated: 43cm (length), 33cm (width), and 14cm (height). This provides a clear visual reference for the physical size of the unit.

8. Garantia i Suport

The Audizio Toledo turntable comes with a 2 any de garantia del fabricant. For technical support, troubleshooting beyond this manual, or warranty claims, please contact your retailer or the official Audizio support channels.

Spare parts are available for 2 years.