Radiomaster Pocket Hall Gimbal Transmitter Remote Control Manual

Introducció

The Radiomaster Pocket is a compact and lightweight remote control transmitter designed for various RC applications. It features Hall gimbals, a foldable antenna, and is available in different versions, including CC2500 and ExpressLRS. This manual provides essential information for setting up, operating, and maintaining your Radiomaster Pocket.

Què hi ha a la caixa

Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet:

• 1 x Pocket Radio
• 1 x Custom Carry Pouch
• 1 x cable USB-C
• 1 x protector de pantalla
• 1 x Adhesiu
• 1 x Manual (aquest document)
• 4 x Low Tension Springs (for gimbals)

Producte acabatview

The Radiomaster Pocket is designed for portability and performance. Key features include:

• Hall Effect Gimbals: For smooth centering and precise response.
• Llums LED incorporades: To visualize your inputs.
• Disseny portàtil i lleuger: Fàcil de transportar i emmagatzemar.
• Foldable Antenna: Enhances portability.
• Removable Stick Ends: For customization and compact storage.
• Pantalla LCD retroil·luminada: Offers a clear balance of size and functionality.
• External Module Bay: Compatible with RadioMaster Nano-size modules and TBS Nano Crossfire/Nano Tracer.
• 18650 Battery Compatibility: Provides extended battery life (batteries not included).
• Pre-installed EdgeTX Firmware: Ready for advanced customization and control.

Configuració

1. Instal·lació de la bateria

The Radiomaster Pocket requires two 18650 batteries (not included). To install:

1. Localitzeu el compartiment de la bateria a la part posterior del transmissor.
2. Obriu la coberta del compartiment.
3. Insert two 18650 batteries, ensuring correct polarity.
4. Tanqueu bé la tapa del compartiment de la bateria.

2. Engegada inicial

Press and hold the power button located on the front of the transmitter until the screen illuminates and the EdgeTX firmware loads. The transmitter will perform a self-check upon startup.

3. Antenna and Stick Ends

• Antena: Unfold the antenna to its upright position for optimal signal transmission. Fold it down for storage.
• Stick Ends: The transmitter comes with removable stick ends. You can customize them or remove them for more compact storage.

Instruccions de funcionament

1. Controls bàsics

Familiaritzeu-vos amb els controls principals:

• Gimbals: Control primary flight surfaces (throttle, rudder, aileron, elevator).
• Botons de retallar: Used for fine-tuning channel outputs.
• Botons de navegació: For menu navigation on the LCD screen.
• Botó d'encesa: Turns the unit on/off and can be used for menu selection.

2. Gimbal Adjustment

The gimbals can be adjusted for tension and self-centering. Refer to Figure 7 for adjustment points:

• A (I-R): Turn clockwise to disable self-centering (throttle). Turn counter-clockwise to enable self-centering (throttle).
• B (T): To adjust the throttle stick tension. Turn clockwise to increase stick tension. Turn counter-clockwise to decrease stick tension.
• C (UP-DOWN): Turn clockwise to increase vertical stick tension. Turn counter-clockwise to decrease stick tension.
• D (LEFT-RIGHT): Turn clockwise to increase horizontal stick tension. Turn counter-clockwise to decrease stick tension.

Especificacions

Manteniment

• Neteja: Use a soft, dry cloth to clean the exterior of the transmitter. Avoid using harsh chemicals or solvents.
• Emmagatzematge: Store the transmitter in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
• Actualitzacions de firmware: Periodically check the official Radiomaster weblloc web per a actualitzacions de firmware per garantir un rendiment òptim i l'accés a noves funcions.

Resolució de problemes

Problemes comuns i solucions:

• El transmissor no s'encén:
  • Assegureu-vos que les bateries estiguin instal·lades correctament i completament carregades.
  • Comproveu la polaritat de la bateria.
• No signal to receiver:
  • Verify the antenna is unfolded and in an upright position.
  • Ensure the transmitter and receiver are properly bound. Refer to your receiver's manual for binding instructions.
  • Comproveu si hi ha interferències d'altres dispositius de 2.4 GHz.
• Gimbal response issues:
  • Check gimbal tension settings as described in the "Gimbal Adjustment" section.
  • Calibrate gimbals through the EdgeTX firmware settings if necessary.

For further assistance, please refer to the official Radiomaster support resources or community forums.

Informació important de seguretat

• Always operate your RC equipment responsibly and in accordance with local laws and regulations.
• Ensure your batteries are in good condition and charged properly.
• Never operate your RC model near people, animals, or property that could be damaged.
• Perform pre-flight checks before each use to ensure all controls are functioning correctly.
• Keep the transmitter away from water and moisture, as it is not water resistant.

Garantia i Suport

For information regarding warranty coverage, technical support, or service, please visit the official Radiomaster weblloc web o poseu-vos en contacte amb el vostre distribuïdor autoritzat. Conserveu el comprovant de compra per a reclamacions de garantia.