DEVAISE Ergonomic Mesh Office Chair with Footrest

1. Introducció

Thank you for choosing the DEVAISE Ergonomic Mesh Office Chair with Footrest, Model ABGY015. This manual provides essential information for the safe assembly, operation, and maintenance of your new office chair. Designed for comfort and support, this chair features an ergonomic backrest, adjustable headrest, lumbar support, and a retractable footrest to enhance your work or relaxation experience.

Image 1.1: The DEVAISE Ergonomic Mesh Office Chair with Footrest, showcasing el seu disseny i les seves característiques.

2. Informació de seguretat

• Llegiu atentament totes les instruccions abans de muntar i utilitzar.
• Ensure all components are securely fastened before using the chair.
• No us poseu drets a la cadira ni la feu servir com a tamboret.
• No supereu la capacitat màxima de pes de 300 lliures.
• Mantingueu els nens i les mascotes allunyats de la cadira durant el muntatge.
• Avoid exposing the chair to direct sunlight or extreme temperatures to prevent material degradation.
• Utilitzeu-lo sobre una superfície plana per evitar que es bolqui.

3. Contingut del paquet

Si us plau, verifiqueu que hi hagi totes les peces abans de començar el muntatge. Si falta alguna peça o hi ha alguna danyada, poseu-vos en contacte amb el servei d'atenció al client.

• Muntatge del respatller
• Seat Cushion with Armrests and Footrest
• Reposacaps
• Base d’estrelles
• Gas Lift Cylinder (SGS Class 4)
• Rodes (5 peces)
• Placa de mecanisme
• Paquet de ferramenta (cargols, volanderes, clau Allen)
• Manual d'instruccions

4. Instruccions de muntatge

El muntatge sol trigar aproximadament 20 minuts. Segueix aquests passos amb atenció.

Pas 1: munta la base

1. Introduïu les cinc rodes als forats de l'extrem de cada pota de la base d'estrella. Empenyeu-les fermament fins que encaixin al seu lloc.
2. Insert the gas lift cylinder into the center hole of the star base.

Image 4.1: The assembled chair base with casters.

Image 4.2: The SGS Class 4 Gas Lift cylinder.

Step 2: Attach the Mechanism Plate to the Seat Cushion

1. Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion.
2. Secure the mechanism plate using the provided screws and Allen wrench. Ensure the front of the mechanism faces the front of the seat.

Step 3: Attach the Backrest to the Seat Cushion

1. Align the backrest with the mounting brackets on the seat cushion.
2. Secure the backrest using the designated screws.

Step 4: Attach the Headrest

1. Slide the headrest into the designated slot at the top of the backrest.
2. Adjust to your preferred height and angle.

Step 5: Connect the Seat Assembly to the Base

1. Col·loqueu amb cura el seient i el respatller muntats sobre el cilindre d'elevació de gas, assegurant-vos que estigui centrat i estable.
2. Apply downward pressure to secure the connection.

Once assembled, test all functions and adjustments to ensure proper operation.

5. Instruccions de funcionament

Your DEVAISE office chair offers multiple adjustments for personalized comfort.

5.1. Ajust de l'alçada de la cadira

To adjust the chair height, locate the lifting handle under the right side of the seat. Pull the handle up while seated to lower the chair, or pull it up while standing to raise the chair. Release the handle at the desired height.

Image 5.1: Illustration of the adjustable height and tilt-locking functions.

5.2. Backrest Recline and Tilt-Lock Function

The backrest can recline and lock at any angle within 145°. To recline, pull the tilt handle (usually located next to the height adjustment lever) outwards. Lean back to the desired angle, then push the handle inwards to lock the position. To unlock and return to an upright position, pull the handle outwards again and lean forward slightly.

5.3. Reposacaps ajustable

The headrest can be adjusted vertically by pulling it up or pushing it down (up to 3.7 inches). It can also rotate 45° to provide optimal neck support. Adjust it to align with the curve of your neck.

Image 5.2: Visual guide for adjusting the headrest's height and rotation.

5.4. Adjustable Lumbar Support

The chair features adjustable lumbar support to help maintain proper spinal alignment. Locate the adjustment knob or lever on the backrest and rotate or slide it to increase or decrease the lumbar curve to suit your preference.

5.5. Retractable Footrest

For relaxation, pull out the footrest located under the seat. Extend it fully and place your legs on it. When not in use, push it back under the seat until it is fully retracted.

6. Manteniment

• Neteja: Netegeu amb un anunciamp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the mesh or other materials.
• Inspecció: Reviseu periòdicament tots els cargols i perns per assegurar-vos que estiguin ben ajustats. Torneu a apretar-los si cal.
• Rodes: Keep casters free of debris (hair, dust) to ensure smooth movement and prevent floor scratches.
• Ascensor de gas: No intenteu desmuntar el cilindre d'elevació de gas.

7. Solució De Problemes

8. Especificacions

• Marca: DEVAISAR
• Nom del model: ABGY015 Home Office Desk Chair
• Color: Negre
• Dimensions del producte: 23.2 "P x 24" W x 48" H
• Pes màxim recomanat: 300 lliures
• Estil d'esquena: Espatlla sòlida (malla)
• Profunditat del seient: 19.9 polzades
• Material de farciment: Foam (28D high-density)
• Ascensor de gas: SGS Class 4
• Posició reclinada: Up to 145° with tilt-lock
• Pes de l'article: 36.6 lliures
• Temps de muntatge: Uns 20 minuts

Imatge 8.1: Dimensions detallades del producte.

9. Garantia i Suport

This DEVAISE office chair is backed by a garantia de dos anys des de la data de compra. Aquesta garantia cobreix defectes de fabricació i defectes de materials en condicions d'ús normal.

For warranty claims, missing parts, or any other inquiries, please contact DEVAISE customer support. Have your purchase receipt and model number (ABGY015) ready when contacting support.

You can find more information and contact details on the official DEVAISE weblloc web o a través del portal d'atenció al client del vostre venedor.