AZZUNO Handheld Stick Welding Machine & Welding Helmet User Manual

1. Introducció

Thank you for choosing the AZZUNO Handheld Stick Welding Machine and Auto-Darkening Welding Helmet. This comprehensive system is designed for portability and efficiency, suitable for various welding tasks. This manual provides essential information for the safe and effective operation, setup, and maintenance of your new welding equipment. Please read it thoroughly before use.

2. Informació de seguretat

Welding can be dangerous. Always follow safety precautions to prevent injury or damage. This section outlines critical safety guidelines.

Precaucions generals de seguretat:

• Always wear appropriate personal protective equipment (PPE), including the welding helmet, welding gloves, and protective clothing.
• Assegureu-vos que la zona de treball estigui ben ventilada per evitar la inhalació de fums de soldadura.
• Protegiu els vianants dels raigs d'arc i del metall calent. Utilitzeu pantalles o barreres de soldadura.
• Never weld near flammable materials or liquids.
• Ensure all electrical connections are secure and properly grounded.
• No toqueu peces elèctriques actives.
• Desconnecteu l'alimentació abans de realitzar qualsevol manteniment o ajust.

Welding Helmet Safety:

• Always inspect the helmet and lens for damage before each use. Replace damaged parts immediately.
• Ensure the auto-darkening function is working correctly by performing a test before welding.
• Do not use the helmet if the lens is cracked or scratched.

3. Contingut del paquet

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact AZZUNO customer support.

This image displays the complete package contents, including the handheld welding machine, auto-darkening welding helmet, welding rods, ground clamp, welding gloves, welding brush, and a storage toolbox.

Welding Machine Package:

• 1 x Handheld Arc Welder Machine
• 1 x Cl mòltamp
• 1 x Welding Gloves
• 1 x Welding Brush
• 5 x Welding Rods
• 1 x bossa d'emmagatzematge
• 1 x Caixa d'eines

This image shows the auto-darkening welding helmet along with its included accessories: replacement inner and outer lenses, a replacement lithium battery, and the helmet's user manual.

Welding Helmet Package:

• 1 x Folding Welding Helmet (battery included)
• 1 x Replacement Lithium Battery
• 1 x Outer Lens
• 3 x Inner Lenses
• 1 x User Manual (for helmet)

4. Producte acabatview

4.1 Handheld Stick Welding Machine

This image highlights the compact and portable design of the AZZUNO handheld welder, weighing only 3.3 lbs and measuring approximately 9.8 inches by 9.4 inches, making it easy for one-hand operation and transport.

The AZZUNO handheld arc welding machine is designed for portability and ease of use. Weighing just 3.3 lbs, its compact size (approx. 9.8" x 9.4") makes it ideal for tasks at elevated locations and home welding projects.

This image illustrates the digital display and single knob for current adjustment on the handheld welder. It also shows the copper clamp and indicates compatibility with E6013 and E7018 electrode rods ranging from 1/16" to 1/8" in diameter.

It features a clear digital screen and a single knob for stepless current adjustment from 0-90A. It is compatible with E6013 and E7018 electrodes, accommodating diameters from 1/16" to 1/8".

This image highlights the powerful cooling fan integrated into the welding machine, essential for efficient operation and heat dissipation. It also reiterates the current adjustment feature with the digital display.

The machine incorporates a powerful cooling fan to ensure efficient and stable operation during use.

4.2 Casc de soldadura amb enfosquiment automàtic

This image details the key features of the AZZUNO auto-darkening welding helmet, including its 3.94" x 3.82" large viewing area, 1/1/1/1 true color lens, 1/10000s auto-darkening speed, and adjustable dark shade range (5-9/9-13/GRIND(4)).

The AZZUNO welding helmet features an expansive 3.94" x 3.82" true color lens, providing an ultra-clear viewing experience with 1/1/1/1 optical clarity. This large lens ensures a wider field of vision and accurate color representation.

Aquesta imatge ofereix un detall view of the welding helmet's lens specifications, showing the placement of arc sensors, the UV/IR filter, a test button, and a low battery reminder. It also labels the control knobs for adjusting shade, sensitivity, mode, and delay settings.

Equipped with an innovative auto-darkening system supported by 4 premium arc sensors, the helmet enables quick transitions from light to dark (1/10000s response time) for seamless eye protection. It includes controls for shade (5-9/9-13/GRIND(4)), sensitivity, mode, and delay.

This image illustrates the dual power source capability of the welding helmet, utilizing both solar power and a replaceable lithium battery for extended operation and reliability.

The helmet is powered by dual sources: solar energy and a replaceable lithium battery, ensuring reliable operation.

5. Configuració

5.1 Welding Machine Setup

1. Desembalar: Traieu amb cura tots els components de l'embalatge.
2. Connecteu la terra Clamp: Enganxa el terra clamp cable to the appropriate terminal on the welding machine. Ensure a secure connection.
3. Connexió d'alimentació: Connect the welding machine to a suitable 110V power outlet. Ensure the power source matches the machine's requirements.
4. Inserció d'elèctrodes: Insert the desired welding electrode (e.g., E6013 or E7018) into the electrode holder. Ensure it is firmly seated.

5.2 Configuració del casc de soldadura

1. Comprovació de la bateria: The helmet comes with a pre-installed battery. Check the low battery indicator. If needed, replace the lithium battery (CR2450) as per the helmet's user manual.
2. Lens Protection Film: Remove any protective films from both sides of the inner and outer lenses.
3. Ajust d'ajust: Adjust the headgear for a comfortable and secure fit. Ensure the helmet sits properly on your head and can be flipped up and down smoothly.
4. Prova de funció: Press the "TEST" button on the helmet to verify the auto-darkening function. The lens should momentarily darken and then return to clear. If it does not, check the battery and ensure the sensors are clean.

6. Instruccions de funcionament

6.1 Welding Machine Operation

1. Encès: Turn on the welding machine using the power switch. The digital display will illuminate.
2. Ajust actual: Use the single knob to adjust the welding current (0-90A) according to the electrode type and material thickness. Refer to electrode manufacturer guidelines for recommended current settings.
3. Posada a terra: Fixeu fermament el clavill de terraamp to the workpiece or a clean, bare metal surface connected to the workpiece. A good ground connection is crucial for stable arc.
4. Soldadura: With the welding helmet on and properly adjusted, strike an arc by touching the electrode to the workpiece and quickly lifting it slightly. Maintain a consistent arc length and travel speed for optimal results.
5. Refrigeració: The internal cooling fan will operate during use to prevent overheating. Allow the machine to cool down after extended periods of welding.

6.2 Welding Helmet Operation

1. Ajust de l'ombra: Adjust the shade level knob (5-9/9-13) based on the welding process and current. For grinding, select the GRIND(4) mode.
2. Control de sensibilitat: Adjust the sensitivity knob to control how easily the helmet detects the welding arc. Higher sensitivity is suitable for low-amp soldadura.
3. Control de retard: Adjust the delay knob to set the time the lens remains dark after the arc stops. A longer delay is useful for tack welding or when the workpiece remains bright.
4. Portar el casc: Always wear the helmet in the down position when welding. The auto-darkening lens will automatically darken upon arc ignition.

7. Manteniment

7.1 Welding Machine Maintenance

• Neteja: Regularly clean the exterior of the machine with a dry, soft cloth. Ensure ventilation openings are free from dust and debris.
• Inspecció del cable: Periodically inspect all cables (power, ground, electrode holder) for cuts, fraying, or damage. Replace damaged cables immediately.
• Emmagatzematge: Store the welding machine in a dry, clean environment, away from moisture and extreme temperatures. Use the provided storage bag and toolbox.

7.2 Welding Helmet Maintenance

• Neteja de lents: Clean the outer and inner protective lenses regularly with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
• Substitució de la lent: Replace scratched, pitted, or damaged outer and inner protective lenses promptly. Use only AZZUNO genuine replacement parts.
• Substitució de la bateria: Replace the lithium battery (CR2450) when the low battery indicator illuminates or if the auto-darkening function becomes unreliable.
• Neteja del sensor: Keep the arc sensors on the front of the helmet clean and unobstructed for proper auto-darkening function.
• Emmagatzematge: Store the helmet in a clean, dry place, away from direct sunlight and extreme temperatures.

8. Solució De Problemes

This section addresses common issues you might encounter with your AZZUNO welding equipment.

9. Especificacions

9.1 Handheld Stick Welding Machine

• Model: MMA-90F
• Entrada Voltage: 110 V
• Interval d'ajust actual: 0-90A
• Elèctrodes compatibles: E6013, E7018
• Diàmetre de l'elèctrode: 1/16" - 1/8"
• Pes: Aproximadament 3.3 lliures
• Dimensions: Approximately 9.8" x 9.4"
• Tecnologia: Inversor IGBT

9.2 Casc de soldadura amb enfosquiment automàtic

• Model: AZNH-1097
• Claredat òptica: 1/1/1/1
• Viewàrea 3.94 cm x 3.82 cm
• Sensors d'arc: 4
• Estat de llum: DIN 4
• Estat fosc: Variable 5-9 / 9-13
• Protecció UV/IR: Fins a DIN 16 en tot moment
• Hora de canvi: 1/10000s (Light to Dark)
• Temps de retard: Adjustable (Short to Long)
• Sensibilitat: Ajustable
• Font d'alimentació: Solar Cell & Replaceable Lithium Battery (CR2450)
• Indicador de bateria baixa: Sí
• Mode de mòlta: Yes (DIN 4)

10. Garantia i Suport

AZZUNO products are designed for durability and performance. For warranty information and customer support, please refer to the warranty card included in your package or visit the official AZZUNO weblloc web. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.

For technical assistance, troubleshooting beyond this manual, or to order replacement parts, please contact AZZUNO customer service through the contact information provided on our weblloc web o la vostra plataforma de compra.