Instruccions importants de seguretat
Please read and understand all safety instructions before operating the FOHERE JX-031S Ultrasonic Cleaner. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.
- Seguretat elèctrica: Ensure the unit is properly grounded. Do not operate with wet hands or in wet environments. Disconnect power before cleaning or servicing.
- Manipulació de líquids: Always ensure the water level is over 2/3 capacity of the tank before operation to prevent damage to the unit. Never operate the unit without liquid. Exercise caution with hot water and cleaning solutions to avoid scalding. Do not pour flammable liquids into the tank.
- Funcionament general: Keep out of reach of children. Do not disassemble or modify the unit. Use only as directed in this manual.
Producte acabatview
The FOHERE JX-031S is a 6.5L ultrasonic cleaner designed for effective cleaning of various items using high-frequency sound waves and heat.
Components i característiques
- High-Power Transducers: Equipped with three 60W ultrasonic transducers (total 180W) for efficient cleaning.
- Dipòsit de gran capacitat: 6.5L (1.7 Gallon) 304 stainless steel tank, suitable for various items.
- Sistema de calefacció: Integrated 200W heating system capable of heating water up to 176°F (80°C).
- 40kHz Frequency: Professional ultrasonic frequency for powerful cavitation without damaging delicate surfaces.
- Panell de control digital: LED display for precise control of time (1-30 minutes) and temperature (1°F increments).
- Característiques convenients: Detachable basket, built-in drain valve, and non-slip silicone feet.
Configuració
Desembalatge
Carefully remove the ultrasonic cleaner from its packaging. Inspect the unit for any signs of damage. Retain packaging for future storage or transport.
Col·locació
Place the unit on a stable, level, and dry surface. Ensure there is adequate ventilation around the unit and that the power cord can reach a grounded outlet without strain.
Ompliment inicial
Open the lid and fill the stainless steel tank with water or an appropriate cleaning solution. Ensure the liquid level is above the 'MIN' mark and below the 'MAX' mark, ideally covering at least 2/3 of the tank capacity. Do not overfill.
Setup and Operation Video
Funcionament
Procediment bàsic de neteja
- Omplir el dipòsit: Ensure the tank is filled with water or an appropriate cleaning solution to the recommended level (over 2/3 capacity).
- Col·locar elements: Place the items to be cleaned into the stainless steel basket. Lower the basket into the tank, ensuring items are fully submerged but not touching the bottom of the tank.
- Connectar l'alimentació: Plug the unit into a grounded electrical outlet. Turn on the main power switch located at the back of the unit.
- Temperatura configurada (opcional): Use the 'TEMP+' and 'TEMP-' buttons on the digital control panel to set the desired heating temperature. Press the 'ON/OFF' button under 'TEMP' to start heating.
- Establir hora: Use the 'TIME+' and 'TIME-' buttons to set the desired cleaning duration (1-30 minutes).
- Comença a netejar: Press the 'ON/OFF' button under 'TIME' to start the ultrasonic cleaning process. The display will show the remaining time.
- Acabat: Once the cleaning cycle is complete, the unit will stop automatically. Carefully remove the basket with the cleaned items.
Recommended Settings for Various Items
The 40kHz ultrasonic frequency ensures thorough cleaning, reaching intricate parts and hard-to-reach areas effectively.
Manteniment
Drenant el dipòsit
After cleaning, turn off the unit and unplug it from the power outlet. Place a suitable container under the drain valve located on the side of the unit. Open the drain valve to empty the tank. Close the valve once the tank is empty.
Neteja de la unitat
Netegeu l'exterior de la unitat amb un damp cloth. For the interior tank, rinse with clean water and wipe dry. Do not use abrasive cleaners or immerse the entire unit in water.
Emmagatzematge
Store the ultrasonic cleaner in a cool, dry place away from direct sunlight and moisture. Ensure the tank is completely dry before storage.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La unitat no s'encén | Power cord not connected; Main switch off; Power outage | Check power cord connection; Turn on main switch; Check power supply |
| La funció ultrasònica no funciona | Liquid level too low; Ultrasonic function not activated | Ensure liquid level is over 2/3 capacity; Press the 'ON/OFF' button under 'TIME' to activate ultrasonic cleaning |
| La funció de calefacció no funciona | Funció de calefacció no activada; Temperatura no configurada | Press the 'ON/OFF' button under 'TEMP' to activate heating; Set desired temperature using 'TEMP+'/'TEMP-' |
| Mals resultats de neteja | Incorrect cleaning solution; Insufficient cleaning time; Items too crowded; Water level too low | Use appropriate cleaning solution; Increase cleaning time; Avoid overcrowding items; Ensure proper water level |
| La unitat és excessivament sorollosa | Normal operation sound; Unit not on a stable surface | Some noise is normal during ultrasonic operation; Ensure unit is on a stable, level surface. |
Especificacions
Dades tècniques
| Especificació | Valor |
|---|---|
| Marca | FORA |
| Número de model | JX-031S |
| Potència per ultrasons | 180W |
| Potència de calefacció | 200W |
| Freqüència | 40 kHz |
| Capacitat | 6.5 litres (1.7 galons) |
| Voltage | 110 Volts |
| Material | Acer inoxidable |
| Dimensions del producte | 6.89 x 12.8 x 10.75 polzades |
| Pes de l'article | 11.09 lliures (5.04 quilograms) |
| Consola de control | Toca |
| Característica especial | Control de temperatura |
Garantia i Suport
FOHERE products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official FOHERE weblloc web. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.