Maxlite EF10A19D927/JA81

Maxlite EF10A19D927/JA81 LED Bulb Instruction Manual

Model: EF10A19D927/JA81 | Brand: Maxlite

1. Introducció

This manual provides essential information for the safe and efficient use of your Maxlite EF10A19D927/JA81 10W A19 Dimmable LED Bulb. This LED bulb is designed as a 75W incandescent equivalent, delivering 1100 lumens of 2700K warm white light with a high CRI of 90. It features a clear filament design and is suitable for enclosed fixtures and wet locations. Please read these instructions thoroughly before installation and operation.

2. Informació de seguretat

  • Risc de descàrrega elèctrica: Desconnecteu sempre l'alimentació de l'aparell abans d'instal·lar, treure o fer el manteniment de la bombeta.
  • Risc de cremades: Deixeu que la bombeta es refredi completament abans de manipular-la.
  • Do not use with incompatible dimmers. This bulb is designed for TRIAC dimmers.
  • No desmunteu ni modifiqueu la bombeta. No hi ha peces a l'interior que l'usuari pugui reparar.
  • Ensure the bulb is securely screwed into the fixture to prevent accidental dislodgement.
  • Elimineu les bombetes d'acord amb la normativa local.

3. Instal·lació

  1. Ensure the power supply to the light fixture is turned off at the circuit breaker or wall switch.
  2. Traieu amb cura la bombeta antiga del llum.
  3. Unpack the Maxlite EF10A19D927/JA81 LED bulb.
  4. Screw the new LED bulb clockwise into the standard E26 medium screw base socket until it is finger-tight. Do not overtighten.
  5. Restaura l'alimentació a l'aparell.

This bulb is suitable for use in enclosed luminaires and wet locations, offering versatile installation options.

Maxlite EF10A19D927/JA81 LED bulb, unlit, showing the clear glass and internal filaments with an E26 screw base.

Image: Maxlite EF10A19D927/JA81 LED bulb, unlit, displaying its clear glass and internal filaments with an E26 screw base, ready for installation.

4. Instruccions de funcionament

Once installed and power is restored, the Maxlite EF10A19D927/JA81 LED bulb operates like a standard light bulb.

  • Activació/desactivació: Feu servir l'interruptor de paret connectat al llum per encendre o apagar-lo.
  • Funcionalitat d'atenuació: This bulb is dimmable from 10% to 100% when used with a compatible TRIAC dimmer switch. Adjust the dimmer control to achieve your desired light level. Ensure your dimmer is rated for LED bulbs.
  • Sortida de llum: The bulb provides 1100 lumens of 2700 Kelvin (warm white) light, suitable for creating a comfortable ambiance.
Maxlite EF10A19D927/JA81 LED bulb, lit, against a dark background, showcasing la seva emissió de llum blanca càlida.

Image: Maxlite EF10A19D927/JA81 LED bulb, illuminated, set against a dark background, highlighting its warm white light output and clear filament design.

5. Manteniment

The Maxlite EF10A19D927/JA81 LED bulb requires minimal maintenance.

  • Neteja: Ensure the power is off and the bulb is cool. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Sense peces reparables per l'usuari: Do not attempt to open or repair the bulb. Any attempt to do so will void the warranty.
  • Vida útil: This LED bulb has an estimated lifespan of 15,000 hours under normal operating conditions, significantly reducing the need for frequent replacement.

6. Solució De Problemes

If you encounter issues with your LED bulb, refer to the following common troubleshooting steps:

  • La bombeta no s'encén:
    • Check that the power supply to the fixture is on.
    • Assegureu-vos que la bombeta estigui ben cargolada a l'endoll.
    • Proveu la bombeta en un altre dispositiu que funcioni per confirmar si el problema és amb la bombeta o amb el dispositiu.
  • Bulb Flickers or Dims Inconsistently:
    • Verify that your dimmer switch is compatible with LED bulbs and specifically with TRIAC dimming technology.
    • Ensure the bulb is securely connected in the socket.
    • Check for any loose wiring in the light fixture or switch.
  • Brillantor reduït:
    • If using a dimmer, ensure it is set to the maximum brightness level.
    • Confirmeu el voltage supplied to the fixture is within the bulb's operating range (120 Volts).

7. Especificacions

CaracterísticaDetall
MarcaMaxlite
Nom del modelLED Clear Filament A19 Bulb
Número de partEF10A19D927/JA81
Tipus de llumLED
Wattage10 watts
Equivalent incandescent75 watts
Brillantor1100 lúmens
Temperatura de color2700 Kelvin (Blanc càlid)
Índex de reproducció del color (CRI)90
Mida de la forma del bulbA19
Base del bulbE26 (mitjà)
RegulableYes (TRIAC dimming 10-100%)
Vida útil15,000 hores
Voltage120 Volts
MaterialVidre
Ús interior/exteriorIndoor (Suitable for wet locations)
Característiques especialsDimmable, Energy Efficient, High Efficiency, Long Lasting, JA8 Listed
CertificacionscETLus, RoHS, FCC Compliant
UPC767627052583
Packaging for Maxlite LED bulb showing 'Lighting Facts' label with brightness, energy cost, life, and light appearance details.

Image: Packaging for Maxlite LED bulb, displaying the 'Lighting Facts' label which details brightness (1100 lumens), estimated yearly energy cost ($1.20), life (13.7 years), and light appearance (2700K Warm).

8. Informació de la garantia

This Maxlite EF10A19D927/JA81 LED bulb is backed by a 3 any de garantia del fabricant. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the official Maxlite warranty policy or contact customer support.

9. Suport

For further assistance, technical support, or warranty inquiries, please contact Maxlite customer service:

  • Telèfon: 1-800-555-5629 (Referenced for California residents regarding T24 compliance, but can be used for general support.)
  • Weblloc: www.maxlite.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.