Manual d'usuari del dispensador automàtic de sabó M9

1. Producte acabatview

The M9 Automatic Soap Dispenser is a touch-free foam dispenser designed for both liquid soap and hand sanitizer. Its automatic-sensing technology ensures hygienic dispensing, making it suitable for various environments such as bathrooms, kitchens, hotels, and offices. The dispenser features a modern white design with a ribbed texture and a transparent window for monitoring liquid levels. It offers flexible installation options, allowing for wall mounting or desktop placement.

Figura 1: Frontal view of the M9 Automatic Soap Dispenser, showcasing its sleek design and transparent liquid level window.

2. Característiques clau

• Funcionament sense contacte: Advanced infrared sensor technology for hands-free dispensing.
• Col·locació versàtil: Can be wall-mounted or used as a desktop unit.
• Ús multiusos: Compatible with foam soaps, hand sanitizers, facial cleansers, and laundry detergents.
• Disseny elegant: White exterior with ribbed texture, clear window, and fingerprint-resistant finish.
• Convenient Refill: Large capacity tank with easy-to-access top opening.

3. Contingut del paquet

Si us plau, comproveu el paquet per veure si hi ha els elements següents:

• M9 Automatic Soap Dispenser Unit
• Manual d'usuari
• Wall Mounting Accessories (if applicable)

4. Guia de configuració

1. Instal·leu les bateries: Open the battery compartment (usually at the bottom or back) and insert the required batteries (not included). Ensure correct polarity.
2. Omplir amb líquid: Open the top cap of the dispenser. Pour your desired foam soap, liquid soap (diluted for foaming), or hand sanitizer into the reservoir. Do not overfill.

Figure 2: Illustration of filling the dispenser with different types of liquid, such as foam soap, hand sanitizer, laundry detergent, or facial cleanser.
3. Trieu la ubicació:
   • Ús d'escriptori: Place the dispenser on a flat, stable surface.
   • Muntatge en paret: Use the provided mounting accessories to securely attach the dispenser to a wall. Ensure it is placed at a convenient height and away from direct water spray.
4. Encès: Locate the power button (if any) and turn the dispenser on. Some models may power on automatically upon battery insertion.

5. Instruccions de funcionament

1. Dispensing Foam: Place your hand approximately 2-3 inches directly under the nozzle. The infrared sensor will detect your hand and automatically dispense a measured amount of foam.

Figure 3: A hand positioned under the dispenser's nozzle, demonstrating the automatic foam dispensing action.
2. Adjusting Foam Output (if applicable): Some models may have a button or setting to adjust the volume of foam dispensed. Refer to the specific controls on your device for this feature.
3. Llums indicadores: Observe any indicator lights for status, such as low battery or dispensing activity.

6. Manteniment

• Ompliment: When the liquid level in the transparent window is low, refill the dispenser as described in the "Setup Guide" (Section 4).
• Neteja: Netegeu l'exterior del dispensador amb un drap suau iamp drap. No submergiu la unitat en aigua ni utilitzeu productes de neteja abrasius.
• Substitució de la bateria: Replace batteries when the dispenser's performance diminishes or indicator lights signal low power.
• Prevenir l'obstrucció: If using liquid soap, ensure it is diluted appropriately for foaming. Use a 1:3 or 1:4 soap-to-water ratio for best results.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the packaging or contact the retailer where the product was purchased. For technical support or further assistance, please contact the manufacturer's customer service.

Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.