Informació important de seguretat
Llegiu atentament totes les instruccions abans d'utilitzar l'aparell. Conserveu aquest manual per a futures consultes.
- Desconnecteu sempre l'aspiradora de la xarxa elèctrica abans de netejar-la o fer-ne el manteniment.
- No agafeu materials inflamables o combustibles, cendres calentes ni objectes grans i punxeguts.
- Do not immerse the motor head in water or other liquids.
- Assegureu-vos que tots els filtres estiguin correctament instal·lats abans de l'operació.
- Aquest aparell només és per a ús domèstic.
Contingut del paquet
Verifiqueu que tots els elements estiguin presents a l'embalatge:
- 1x Hoover Wet & Dry vacuum cleaner
- 1x Flexi hose and tube attachment
- 1x 2-in-1 Crevice tool
- 1x raspall de terra
- 1 x manual d'instruccions
All components included with the Hoover HWD21 Wet Dry Drum Vacuum.
Muntatge i configuració
- Desembalatge: Traieu amb cura tots els components de l'embalatge.
- Attaching Castor Wheels: Invert the tank and firmly push the castor wheels into their designated slots on the base. Ensure they click into place.
Ensure castor wheels are securely attached for mobility.
- Connexió de la mànega: Insert the flexible hose into the suction inlet on the front of the vacuum cleaner until it is secure. For the blower function, connect the hose to the exhaust outlet.
- Attaching Extension Tubes and Nozzles: Connect the desired extension tubes to the hose, then attach the appropriate nozzle (e.g., floor brush, crevice tool) for your cleaning task.
Instruccions de funcionament
Encès/Apagat
Plug the power cord into a suitable electrical outlet. Press the green "ON" button to start the vacuum and the red "OFF" button to stop it.
Location of the power ON (green) and OFF (red) buttons.
Aspiració en sec
For dry vacuuming, ensure the dry filter is correctly installed inside the tank. Attach the floor brush or crevice tool as needed. Move the nozzle over the dry debris to collect it.
The floor brush attachment effectively cleans dry debris from hard surfaces.
Aspiració humida
For wet vacuuming, remove the dry filter. Attach the appropriate wet nozzle (if different from dry, or use the floor brush without the brush insert). Carefully vacuum liquid spills. Do not overfill the tank; the float mechanism will stop suction when full.
The vacuum efficiently handles liquid spills on various surfaces.
Funció de bufador
To use the blower function, detach the hose from the suction inlet and connect it to the exhaust outlet located on the motor head. Turn on the vacuum to use it as a blower for clearing debris from pathways or hard-to-reach areas.
The blower function helps clear debris from surfaces.
Ús d'arxius adjunts
- Multi-surface Floor Nozzle: Ideal for general cleaning on both hard floors and carpets.
- Eina per esquerdes 2 en 1: Use the narrow end for tight spaces and corners. Slide the brush attachment forward for dusting delicate surfaces or upholstery.
The crevice tool with brush is suitable for cleaning upholstery and tight areas.
Manteniment
Buidant el dipòsit
After each use, especially after wet vacuuming, unplug the unit and unclip the motor head. Carefully lift the motor head and dispose of the collected debris or liquid. Clean the inside of the tank with water and mild detergent if necessary, then dry thoroughly.
Neteja de filtres
- Filtre sec: For dry vacuuming, regularly check and clean the dry filter. Tap it gently to remove dust or rinse with water if heavily soiled. Ensure it is completely dry before re-installing.
- Filtre d'escuma (per a ús humit): If a foam filter is used for wet vacuuming, rinse it with water and allow it to air dry completely before storage or next use.
Neteja i emmagatzematge general
Netegeu l'exterior de l'aspiradora amb anunciamp cloth. Do not use abrasive cleaners. Store the vacuum and its accessories in a dry place, away from direct sunlight and extreme temperatures. Utilize the onboard accessory storage for convenience.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| L'aspiradora no s'encén. | No power supply; power cord not plugged in; power button not pressed. | Check power outlet; ensure cord is securely plugged in; press the green "ON" button. |
| Pèrdua de succió. | Hose or nozzle blocked; tank full; filter clogged; hose not securely attached. | Check and clear blockages; empty the tank; clean or replace filter; ensure hose is firmly connected. |
| Fuita d'aigua durant l'aspiració en humits. | Dipòsit massa ple; juntes no ben col·locades. | Empty the tank; check and re-seat the motor head and any seals. |
| Soroll inusual durant el funcionament. | Blockage in hose or nozzle; motor issue. | Check for and remove blockages. If noise persists, contact customer support. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | Hoover |
| Número de model | HWD21 |
| Font d'alimentació | Elèctric amb cable |
| Potència del motor | 1200W |
| Capacitat del dipòsit | 20 litres |
| Material del dipòsit | Acer inoxidable |
| Longitud del cable | 5m |
| Recomanació de superfície | Tots els pisos |
| Color | Negre i Plata |
| Components inclosos | Vacuum cleaner, Flexi hose, Extension tube, 2-in-1 Crevice tool, Floor brush, Instruction manual |
Garantia i Suport
This Hoover HWD21 Stainless Steel 20L Wet Dry Drum Vacuum comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support, spare parts, or warranty claims, please contact Hoover customer service through their official weblloc web o la informació de contacte que es proporciona a la documentació de la garantia.
Si us plau, conserveu el comprovant de compra per motius de garantia.