1. Introducció
The Armor All Rear View Mirror Phone Mount is designed to securely hold smartphones between 2.5 inches and 3.7 inches wide. This mount attaches to your vehicle's rear view mirror, providing an adjustable and rotatable platform for your mobile device. It features a telescopic arm for customizable reach and a 360-degree rotating ball joint for optimal viewing angles, supporting hands-free navigation and communication.
2. Informació de seguretat
- Ensure the mount is securely attached to the rear view mirror before placing a device in it.
- Verify that the phone is firmly gripped by the mount's clamps to prevent accidental drops.
- Adjust the mount and phone position to ensure it does not obstruct your view de la carretera o interferir amb els controls del vehicle.
- Do not attempt to adjust the mount or phone while driving. Make all adjustments when the vehicle is safely parked.
- Avoid exposing the mount to extreme temperatures for prolonged periods, as this may affect its material integrity.
3. Contingut del paquet
Si us plau, comproveu el paquet per veure si hi ha els elements següents:
- 1 x Armor All Rear View Mirror Phone Mount (Model AMH3-1022-BLK)
- 1 x Manual d'instruccions (aquest document)
4. Configuració i instal·lació
Follow these steps to install your Armor All Rear View Mirror Phone Mount:
- Preparar la muntura: Ensure the quick-lock base is in the open position. The mount is designed to expand and grip the top and bottom edges of your vehicle's rear view mirall.
- Attach to Rear View Mirall: Carefully position the mount over your rear view mirror. Press the quick-lock base firmly against the mirror until it securely clamps onto the mirror's edges. The mount should feel stable and not wobble.
- Assegura la muntura: Once positioned, engage the quick-lock mechanism to tighten the grip on the mirror. This ensures a firm and stable attachment.
The mount features extendable grip arms and a telescopic arm for further adjustment:
- Adjust Telescopic Arm: The telescopic arm can be extended or retracted to bring your phone closer or further away, optimizing accessibility and view. Locate the adjustment mechanism on the arm and extend or retract as needed.
- Posicionament: Adjust the mount's position to ensure it does not obstruct your view of the road. The design allows for placement that keeps your dashboard and windshield clear.
5. Instruccions de funcionament
5.1 Inserció del telèfon
- Open Phone Clamps: Gently pull apart the adjustable clamps on the phone holder portion of the mount.
- Place Phone: Carefully insert your smartphone between the opened clamps. Ensure the phone is centered and sits securely. The mount is compatible with phones between 2.5 inches and 3.7 inches wide.
- Telèfon segur: Allibera el clamps to allow them to grip your phone firmly. Verify that the phone is stable and will not fall out during vehicle movement.
5.2 Ajust Viewangle ing
The mount features a 360-degree rotating ball joint, allowing for flexible viewangles:
- Girar: Gently rotate the phone holder to achieve your desired portrait or landscape orientation.
- Inclinació: Tilt the phone holder up or down, or side to side, using the ball joint to find the optimal viewing angle that minimizes glare and maximizes visibility without obstructing your driving view.
5.3 Extracció del telèfon
To remove your phone, gently pull apart the adjustable clamps and lift your phone out. Ensure you do this when the vehicle is stationary.
6. Manteniment i cura
- Neteja: Netegeu la muntura amb un drap suauamp cloth. Do not use harsh chemicals or abrasive cleaners, as these can damage the plastic and rubber components.
- Inspecció: Periodically check the mount for any signs of wear or damage, especially the clamping mechanisms and ball joint. If any damage is observed, discontinue use.
- Emmagatzematge: Si retireu la muntura durant períodes prolongats, guardeu-la en un lloc fresc i sec, allunyat de la llum solar directa.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Mount is not stable on the rear view mirall. | Quick-lock base not fully engaged or mirror shape incompatible. | Ensure the quick-lock base is fully clamped. If your mirror has an unusual shape (e.g., very thick or with protrusions), the mount may not be suitable. |
| El telèfon no està ben subjectat. | Phone outside compatible width range (2.5" - 3.7") or clamps not fully closed. | Verify your phone's width. Ensure the clamps are fully closed around the phone. Remove bulky phone cases if they prevent a secure grip. |
| Mount wobbles during driving. | Loose connections at the ball joint or mirror clamp. | Tighten any adjustable knobs or screws on the ball joint. Re-secure the quick-lock base on the mirror. Some minor vibration may occur on rough roads. |
| Difficulty adjusting the telescopic arm or rotation. | Adjustment mechanism is stiff or overtightened. | Apply gentle, even pressure. Do not force adjustments. If there are locking rings, ensure they are loosened before attempting to adjust. |
8. Especificacions
| Característica | Detall |
|---|---|
| Número de model | AMH3-1022-BLK |
| Marca | Armadura Tot |
| Tipus de muntatge | posterior View Mirall |
| Dispositius compatibles | Telèfons intel·ligents |
| Amplada del telèfon compatible | 2.5 polzades - 3.7 polzades |
| Rotació | 360° Rotatable Ball Joint |
| Ajust del braç | Adjustable Telescopic Arm |
| Material | Plàstic, cautxú |
| Color | Negre |
| Pes de l'article | 14.4 unces (aproximadament 408 grams) |
9. Garantia i Suport
Per obtenir informació sobre la garantia o assistència tècnica, consulteu l'embalatge del producte o poseu-vos en contacte directament amb el fabricant. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.
Manufacturer: Jem Accessories