AutoFull G7 Ergonomic Gaming Chair User Manual

1. Introducció

Thank you for choosing the AutoFull G7 Ergonomic Gaming Chair. This chair is designed to provide ultimate comfort and support with its advanced features, including a 3-Zone Dynamic Lumbar system, 22-point full-body adjustment, breathable CloudTech mesh, 720° dual-axis armrests, and a 140° zero-gravity recline. This manual will guide you through the assembly, operation, and maintenance of your new chair to ensure optimal performance and longevity.

2. Configuració i instal·lació

For a smooth assembly process, it is recommended that two people perform the installation. Please refer to the detailed installation video below for visual guidance.

2.1. Assembly Steps Overview

1. 5-Star Base & Gas Lift Installation:
   • Insert each chair leg into the 5-star base.
   • Flip the 5-star base upside down.
   • Secure chair legs to the 5-star base using five Type-4 screws.
   • Insert each caster into the mounting hole of chair legs.
   • Flip the 5-star base upright (casters touching ground).
   • Align and insert gas lift into the central hole of the 5-star base.
2. Instal·lació del reposabraços:
   • Place backrest flat on the floor.
   • Identify left/right armrests and align with backrest mounting holes.
   • Secure one armrest bracket to the backrest using two Type-1 screws.
   • Repeat the same process for the other armrest bracket.
3. Wire Controller Installation:
   • Remove pre-installed wire controller screws located on the side of the seat cushion.
   • Align and position the wire controller over mounting holes.
   • Secure the wire controller using the screws removed earlier.
4. Instal·lació del respatller:
   • Align backrest with chassis mounting holes.
   • Secure backrest to the chassis using three Type-2 screws.
   • Insert assembled five-star base and gas lift into chassis mounting holes.
   • Set the chair upright.
5. Instal·lació del reposacaps:
   • Align headrest with top backrest mounting holes.
   • Engage two mounting posts on the split part of the back armor into upper backrest holes.
   • Secure headrest to the backrest using two Type-3 screws.

3. Instruccions de funcionament

The AutoFull G7 chair offers extensive adjustability to customize your seating experience. Refer to the user guide video and instructions below for proper operation of each feature.

3.1. Ajust de l'alçada de la cadira

• Per elevar: Stand up from the chair, then lift the control lever on the right side of the seat cushion.
• Abaixar: Sit on the chair, then lift the control lever on the right side of the seat cushion.

3.2. Armrest Adjustments (720° Dual-Axis)

• Ajust d'alçada: Flip the outer armrest paddle upward to lift, or press the armrest for height adjustment.
• Forward/Backward Position: Press and hold the armrest while pushing forward/backward.
• Ajust d'angle: Lift the front edge of the armrest surface. Lift to the highest position to reset.
• Giració de 360°: Rotate the armrest handle for 360° rotation. Rotate the armrest surface for 360° swivel.

3.3. Headrest Adjustments (4D Dual-Axis)

• Ajust d'alçada: Pull the headrest up/down.
• Front-Back Position: Pull the headrest forward.
• Ajust d'inclinació: Rotate the primary axis at the headrest base.
• Angle de gir: Grip the upper part of the headrest mesh on both sides and move it up/down.

3.4. Backrest and Lumbar Support Adjustments

• Alçada del respatller: Lift up/down both sides of the backrest.
• Lumbar Vertical Positioning: Grip both sides of the lumbar support bracket to lift or press. The lumbar support can slide up and down slightly to follow and support the movement of your waist.
• Lumbar Side Wings: The two sides of the lumbar support can be folded inward.
• Lumbar Lock: Lift the control lever to lock the lumbar support in place. When the control lever is in the lower position, the lumbar support will automatically adjust forward/backward to follow your waist.

3.5. Ajust de la profunditat del seient

• Push the adjustment lever forward to adjust the seat depth.

3.6. Recline Function and Footrest

• Reclinació: Pull the adjustment lever backward, then lean back to activate the recline function. Return the adjustment lever to its original position to lock the reclining angle.
• Reposall: Pull out the footrest and flip it outward to activate the footrest function. Pull the adjustment lever backward again and lean forward to return the backrest upright. Retract the footrest when not in use.

4. Manteniment

Proper care and maintenance will extend the life of your AutoFull G7 chair.

• Neteja: Netegeu amb un anunciamp drap. Eviteu productes químics agressius o netejadors abrasius.
• Cura de la malla: The CloudTech mesh is breathable and durable. Regularly dust the mesh to prevent accumulation.
• Parts mòbils: Periodically check all screws and connections to ensure they are tight. Lubricate moving parts if necessary to maintain smooth operation.
• Eviteu la sobrecàrrega: No supereu la capacitat de càrrega màxima de 330 lliures (150 kg).

5. Solució De Problemes

If you encounter any issues with your AutoFull G7 chair, please refer to the following common troubleshooting tips:

• La cadira no ajusta l'alçada: Ensure the gas lift lever is fully engaged or disengaged as required. Check for any obstructions.
• Armrests are loose: Check and tighten the screws securing the armrests to the chair.
• Sorolls de grinyols: Apply a small amount of lubricant to the moving parts, especially around the gas lift and recline mechanism.
• Backrest not reclining: Ensure the recline lock lever is disengaged. Check for any obstructions in the mechanism.
• Rodes que no giren suaument: Clean any debris (hair, dust) from the caster wheels.

If the issue persists, please contact AutoFull customer support for further assistance.

6. Especificacions

Descripció de la imatge: A diagram illustrating the key dimensions of the AutoFull G7 Ergonomic Gaming Chair in inches, including seat height, backrest height, armrest height, and overall width and depth. It also shows recommended height (61-76.8 inches) and maximum load capacity (330.6 lbs).

7. Garantia i Suport

AutoFull is committed to providing high-quality products and excellent customer service.

• Garantia: The AutoFull G7 chair comes with a 3-year warranty on parts and a lifetime warranty on the frame.
• Devolucions: Enjoy 30-day easy returns.
• Atenció al client: For any inquiries, technical assistance, or warranty claims, please contact our 24/7 customer support team. You can find contact information on the official AutoFull weblloc web o a través de la vostra plataforma de compra.