1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your SENSTREE Dual Probe Temperature & Humidity Controller, Model THT1032-ZJ. This device is designed to precisely monitor and control both temperature and humidity in various environments, utilizing independent sensors for optimal performance. Please read this manual thoroughly before use to ensure safe and efficient operation.
2. Informació de seguretat
Observeu les següents precaucions de seguretat per evitar lesions o danys al dispositiu:
- Assegureu-vos que la font d'alimentació voltage matches the device's specifications (240 Volts AC).
- Do not immerse the controller unit in water or expose it to excessive moisture. The probes are water-resistant, but the main unit is not.
- Avoid exceeding the maximum rated current of 10 Amps per outlet. Overloading can cause damage or fire.
- Mantingueu el dispositiu fora de l'abast dels nens.
- No intenteu desmuntar ni reparar la unitat vosaltres mateixos. Poseu-vos en contacte amb personal qualificat per al servei tècnic.
- Ensure proper ventilation around the controller to prevent overheating.
3. Producte acabatview
3.1 Components
The SENSTREE Dual Probe Temperature & Humidity Controller consists of the main control unit, a temperature probe, and a humidity probe.
Figure 1: Main unit of the SENSTREE Dual Probe Temperature & Humidity Controller, showing the display, control buttons, three power outlets, and connected temperature and humidity probes.
3.2 Característiques clau
- Dual-Probe Design: Features separate temperature and humidity sensors for independent, precise monitoring and control.
- Pantalla dual: Clear LCD screen simultaneously shows real-time temperature (°F/°C) and humidity (%).
- Aplicació àmplia: Suitable for greenhouses, reptile terrariums, grow tents, wine cellars, and storage rooms. Compatible with humidifiers, dehumidifiers, heaters, AC units, and fans.
- Enginyeria de precisió: High-accuracy sensors and advanced calibration ensure reliable performance. Alerts for out-of-range conditions protect sensitive environments.
- Fàcil d'utilitzar: Simple setup and intuitive buttons for setting desired ranges and automatic device activation.
4. Configuració
4.1 Desembalatge
Carefully remove the controller and its components from the packaging. Verify that all parts are present and undamaged.
4.2 Muntatge del controlador
The controller features a hanging design for convenient placement.
Figure 2: The back of the controller unit features keyhole slots for wall mounting using screws (not included).
- Select a suitable location for the controller, ensuring it is away from direct heat sources, moisture, and vibrations.
- Use appropriate screws (not supplied) to secure the controller to a wall or vertical surface using the keyhole slots on the back.
4.3 Connexió de sondes
The controller comes with two independent probes: one for temperature and one for humidity.
Figure 3: The separate temperature probe (left) and humidity probe (right) for precise environmental measurements.
- Plug the temperature probe into the designated port on the controller.
- Plug the humidity probe into its designated port.
- Position the probes in the area where you need to monitor temperature and humidity. Ensure they are not obstructed and are representative of the environment you wish to control. The sensor length is approximately 1.4 meters (55.12 inches).
4.4 Encès
- Connecteu el cable d'alimentació del controlador a una presa de corrent estàndard de 240 V CA.
- The LCD display will illuminate, showing current temperature and humidity readings.
5. Instruccions de funcionament
5.1 Mostra finalview
The LCD screen provides real-time information and settings.
Figure 4: The controller's backlit LCD display showing temperature (OUT1), humidity (OUT2), and a clock/timer (OUT3).
- SORTIDA 1: Displays current temperature and heating/cooling status.
- SORTIDA 2: Displays current humidity and humidification/dehumidification status.
- SORTIDA 3: Displays current time or timer status.
5.2 Setting Temperature and Humidity
To set your desired temperature and humidity ranges:
- Premeu el botó SET button once to enter temperature setting mode. The temperature display will flash.
- Utilitza el UP i ABAIX arrow buttons to adjust the desired temperature set point.
- Premeu SET again to confirm the temperature and move to the temperature differential setting (hysteresis). Adjust as needed.
- Premeu SET a third time to enter humidity setting mode. The humidity display will flash.
- Utilitza el UP i ABAIX arrow buttons to adjust the desired humidity set point.
- Premeu SET a fourth time to confirm the humidity and move to the humidity differential setting. Adjust as needed.
- Premeu SET one last time or wait a few seconds for the settings to save automatically and return to normal display.
5.3 Selecció del mode
The controller supports various operating modes for temperature and humidity control.
- Manteniu premut el botó MODE button for 3 seconds to enter mode selection.
- Utilitza el UP i ABAIX arrow buttons to cycle through available modes (e.g., Heating, Cooling, Humidification, Dehumidification, Timer).
- Premeu MODE de nou per confirmar la vostra selecció.
5.4 Funció de temporitzador
The OUT3 port can be configured as a timer. Refer to the detailed instructions in the full manual for specific timer programming steps.
6. Manteniment
To ensure the longevity and accuracy of your controller:
- Neteja: Netegeu la unitat principal amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
- Cura de la sonda: Keep the probes clean and free from debris. Avoid bending or damaging the probe cables.
- Emmagatzematge: If storing the device for an extended period, disconnect it from power and store it in a dry, cool place.
7. Solució De Problemes
Consulteu la taula següent per veure els problemes habituals i les seves solucions.
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla està en blanc | No power; power cord loose | Comproveu la connexió elèctrica; assegureu-vos que la presa de corrent funcioni. |
| Lectures inexactes | Probes dirty or damaged; incorrect placement | Clean probes; reposition probes away from drafts or direct heat/moisture; check for physical damage. |
| Connected device not activating | Incorrect set points; device not plugged in; controller in wrong mode | Verify set points and differential; ensure device is properly plugged into the correct outlet; check operating mode. |
| Missatge d'error a la pantalla | Probe malfunction; internal error | Disconnect and reconnect probes; power cycle the unit. If the error persists, contact customer support. |
8. Especificacions
Technical specifications for the SENSTREE Dual Probe Temperature & Humidity Controller:
| Característica | Especificació |
|---|---|
| Número de model | THT1032-ZJ |
| Voltage | 240 volts (CA) |
| Corrent nominal | 15A max (per plug, check product label for exact rating) |
| Interval de control de temperatura | -10 °C a 120 °C / 14 °F a 248 °F |
| Interval de control d'humitat | 5-99% HR |
| Tipus de visualització | LCD |
| Longitud de la sonda | Approximately 1.4 meters (55.12 inches) |
| Pes de l'article | 1.08 lliures |
| Dimensions del paquet | 6.65 x 6.3 x 2.05 polzades |
9. Garantia i Suport
The SENSTREE Dual Probe Temperature & Humidity Controller comes with a 12 mesos de garantia from the date of purchase, covering manufacturing defects. This warranty does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.
For technical support, troubleshooting assistance, or warranty claims, please contact SENSTREE customer service through the retailer where the product was purchased or visit the official SENSTREE weblloc per obtenir informació de contacte.