1. Instruccions de seguretat importants
Llegiu totes les advertències, instruccions, il·lustracions i especificacions de seguretat proporcionades amb aquesta eina elèctrica. L'incompliment de totes les instruccions que s'indiquen a continuació pot provocar descàrregues elèctriques, incendis i/o lesions greus.
- Seguretat de l'àrea de treball: Mantingueu la zona de treball neta i ben il·luminada. No feu servir eines elèctriques en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables.
- Seguretat elèctrica: Els endolls de les eines elèctriques han de coincidir amb la presa de corrent. No modifiqueu mai l'endoll de cap manera. Eviteu el contacte corporal amb superfícies connectades a terra.
- Seguretat personal: Always wear eye protection, respiratory protection, and appropriate clothing. Do not overreach. Maintain proper footing and balance at all times.
- Ús i cura de l'eina: No forceu l'eina elèctrica. Feu servir l'eina elèctrica adequada per a la vostra aplicació. Desconnecteu l'endoll de la font d'alimentació abans de fer qualsevol ajust, canviar accessoris o guardar eines elèctriques.
- Specific Sprayer Safety: Ensure proper ventilation when spraying. Do not spray flammable materials near open flames or ignition sources. Always clean the sprayer thoroughly after each use.
2. Producte acabatview i contingut del paquet
The VISLONE 300W Electric Paint Sprayer is designed for efficient application of various coatings. Familiarize yourself with its components and ensure all items are present.
Figura 2.1: Mésview of the VISLONE 300W Electric Paint Sprayer.
2.1 Package List:
- 1 x Polvoritzador de pintura
- 2 bateries (1300 mAh)
- 1 x raspall de neteja
- 1 x agulla de neteja
- 4 x Nozzles (Φ1.0mm, 1.8mm, 2.0mm, 2.5mm)
- 3 x Junta
- 1 x Viscosity Cup
- 1 x Manual d'usuari (aquest document)
- 1 x Carregador
3. Muntatge i muntatge
3.1 Preparing the Paint
- Ensure the paint or coating material is suitable for spray application.
- Use the provided viscosity cup to check the paint's viscosity. Thin the paint with the appropriate solvent (water for latex, mineral spirits for oil-based) until it passes through the viscosity cup within the recommended time (refer to paint manufacturer's instructions).
- Strain the thinned paint to remove any lumps or debris that could clog the nozzle.
3.2 Muntatge del polvoritzador
- Attach the paint container (800ml tank) to the sprayer body by screwing it securely.
- Insert a charged battery into the battery slot at the base of the handle until it clicks into place.
Figure 3.1: The 800ml capacity paint tank attached to the sprayer.
3.3 Selecting and Installing Nozzles
The sprayer includes four copper nozzles of different sizes (Φ1.0mm, 1.8mm, 2.0mm, 2.5mm) for various paint types and project requirements.
- Choose the appropriate nozzle size for your paint and desired finish. Generally, smaller nozzles are for thinner materials and finer finishes, while larger nozzles are for thicker materials and faster coverage.
- Unscrew the nozzle cap from the front of the sprayer.
- Insert the selected nozzle and ensure a gasket is properly seated.
- Screw the nozzle cap back on securely.
Figure 3.2: The four interchangeable copper nozzles (1.0mm, 1.8mm, 2.0mm, 2.5mm).
3.4 Ajust dels patrons de polvorització
The sprayer offers three spray patterns: horizontal, vertical, and circular. Rotate the air cap to select the desired pattern.
- Horitzontal: For spraying up and down motions.
- Vertical: For spraying side to side motions.
- Circular: For small areas or detailed work.
4. Funcionament
4.1 Powering On and Testing
- Ensure the sprayer is fully assembled and the paint tank is filled.
- Point the sprayer at a test surface (e.g., cardboard) and press the trigger to start spraying.
- Adjust the flow control knob on the sprayer to achieve the desired paint output. The flow rate can be adjusted between 500-800ml/min.
Figure 4.1: Adjusting the flow control and selecting spray patterns (circular, horizontal, vertical).
4.2 Tècnica de polvorització
- Mantingueu una distància constant (normalment de 6 a 12 cm) de la superfície que s'està pintant.
- Move the sprayer in smooth, even strokes, overlapping each pass by about 50% to ensure uniform coverage.
- Release the trigger at the end of each stroke to avoid paint buildup.
- For best results, apply multiple thin coats rather than one thick coat.
Figura 4.2: Examples of the paint sprayer's application on furniture, walls, cars, and fences.
5. Manteniment i Neteja
Proper cleaning after each use is essential to ensure the longevity and optimal performance of your paint sprayer.
5.1 Desmuntatge per a la neteja
- Disconnect the battery from the sprayer.
- Unscrew the paint container and empty any remaining paint.
- Unscrew the nozzle cap and remove the nozzle and gasket.
- The front section of the sprayer can be easily detached from the motor housing for thorough cleaning.
Figure 5.1: The sprayer's design allows for easy disassembly for cleaning.
5.2 Procediment de neteja
- Fill the paint container with the appropriate cleaning solution (water for water-based paints, solvent for oil-based paints).
- Reattach the container and spray the cleaning solution through the sprayer until it runs clear.
- Thoroughly clean all disassembled parts (nozzle, gasket, container, suction tube) using the provided cleaning brush and needle.
- Netegeu l'exterior del polvoritzador amb anuncisamp tela.
- Allow all parts to dry completely before reassembly or storage.
5.3 Emmagatzematge
Store the clean, dry sprayer in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is removed if storing for extended periods.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense esprai o esprai feble | Clogged nozzle; paint too thick; low paint level; air leak. | Clean nozzle; thin paint; refill tank; check all connections for tightness. |
| Patró de polvorització desigual | Incorrect nozzle selection; clogged air cap; inconsistent spraying distance. | Select appropriate nozzle; clean air cap; maintain consistent distance. |
| La pintura goteja o s'escorre | Too much paint flow; spraying too close; paint too thin. | Reduce flow rate; increase spraying distance; thicken paint slightly. |
| El polvoritzador no s'encén | Battery not charged; battery not properly inserted. | Charge battery; ensure battery is securely inserted. |
7. Especificacions
| Característica | Especificació |
|---|---|
| Potència nominal d'entrada | 300W |
| Capacitat del contenidor | 800 ml |
| Mides de broquet | Φ1.0mm, 1.8mm, 2.0mm, 2.5mm (4 copper nozzles) |
| Velocitat del motor | 30000rpm / min |
| Distància de polvorització | 200-500 cm |
| Paint Flow | 500-800 ml/min |
| Bateria | 2 x 1300 mAh (incloses) |
| Material | PP (polipropilè) |
| Pes de l'article | 3.91 lliures |
| Dimensions del paquet | 10.43 x 7.68 x 6.89 polzades |
Figure 7.1: Dimensions of the VISLONE 300W Electric Paint Sprayer.
8. Garantia i Suport
For warranty information or technical support, please refer to the contact details provided by your retailer or visit the official VISLONE weblloc web. Conserveu el rebut de compra com a comprovant de compra.
Podeu visitar el VISLONE Store on Amazon per a més informació.