True Innovations Mesh Office Chair User Manual

Introducció

Gràcies per la compraasing the True Innovations Mesh Office Chair. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your chair. Please read this manual thoroughly before assembly and use.

Informació de seguretat

• Assegureu-vos que totes les peces estiguin presents i sense danys abans del muntatge.
• Do not use power tools for assembly as this may overtighten screws and damage components.
• Mantingueu les peces petites allunyades dels nens.
• No us atureu a la cadira.
• Do not use the chair if any parts are missing, damaged, or worn.
• Comproveu periòdicament totes les connexions i apreteu-les si cal.

Llista de peces

Before beginning assembly, verify that all components are included in your package:

• Respatller de cadira (malla)
• Seat Cushion (Upholstered Foam)
• Armrests (Flip-Back, Height-Adjustable)
• Base de cadira (5 estrelles amb rodes)
• Cilindre d'elevació de gas
• Mechanism (Tilt Lockout with Recline Tension Control)
• Paquet de ferramenta (cargols, volanderes, clau Allen)

Setup (Assembly Instructions)

Seguiu aquests passos acuradament per a un muntatge correcte:

1. Pas 1: Fixeu les rodes a la base

   Introduïu les cinc rodes als forats de l'extrem de cada pota de la base de la cadira. Premeu fermament fins que encaixin al seu lloc.

   

   Image: Casters inserted into the chair base. Ensure they are fully seated for stability.

2. Step 2: Insert Gas Lift into Base

   Place the larger end of the gas lift cylinder into the center hole of the assembled chair base. Do not force it.

3. Pas 3: Fixeu el mecanisme al coixí del seient

   Align the mechanism with the pre-drilled holes on the underside of the seat cushion. Ensure the front of the mechanism faces the front of the seat. Secure with the provided screws using the Allen wrench. Tighten all screws evenly.

4. Pas 4: Fixeu els reposabraços al coixí del seient

   Attach the armrests to the sides of the seat cushion using the designated screws. Pay attention to the left and right armrest orientation if specified. Do not fully tighten until the backrest is attached.

   

   Image: Detail of the armrest connection to the seat. Note the adjustment button on the arm.

5. Step 5: Attach Backrest to Seat Cushion/Armrests

   Align the backrest with the mounting points on the seat cushion and/or armrests. Secure with screws. Once the backrest is attached, fully tighten all screws for the armrests and backrest.

   

   Imatge: Part posterior view of the chair backrest, highlighting the adjustable lumbar support.

6. Step 6: Connect Assembled Seat to Gas Lift

   Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the tapered end of the gas lift fits securely into the mechanism's opening. Apply gentle downward pressure to seat it properly.

   

   Image: The fully assembled True Innovations Mesh Office Chair, ready for use.

Instruccions de funcionament

Your True Innovations Mesh Office Chair offers several adjustment features for personalized comfort:

• Ajust pneumàtic d'alçada del seient

  To raise the seat, lift the lever on the right side of the chair while taking your weight off the seat. To lower the seat, lift the lever while seated. Release the lever at the desired height.

• Tilt Lockout with Recline Tension Control Knob

  The large knob under the seat at the front controls the recline tension. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline). The lever on the left side of the chair allows you to lock the chair in an upright position or unlock it for reclining.

• Height-Adjustable Flip-Back Arms

  To adjust the height of the armrests, press the button located on the side of each armrest and slide the armrest up or down. Release the button to lock it in place. The armrests can also be flipped back completely to allow the chair to be pushed further under a desk.

  

  Imatge: Lateral view of the chair, showing the armrests in their standard position.

• Height and Pressure Adjustable Lumbar Support

  The lumbar support on the backrest can be adjusted for height by sliding it up or down. The pressure or depth of the lumbar support can also be adjusted by turning the knob located on the back of the chair.

Manteniment i cura

• Neteja

  For the mesh back and upholstered seat, use a soft, damp cloth with mild soap and water. Avoid abrasive cleaners or solvents. For the plastic and metal parts, wipe with a clean, damp tela.

  

  Image: Detail of the soft-touch upholstered foam seat, showing its texture.

• Inspecció periòdica

  Periodically check all screws and bolts to ensure they are tight. Retighten if necessary. Inspect casters for smooth movement and clean any debris that may hinder their function.

• Lubricació

  The gas lift cylinder is maintenance-free. Do not attempt to lubricate it. Casters may benefit from occasional cleaning and light lubrication if they become stiff.

Resolució de problemes

Especificacions

Image: Dimensional diagram of the office chair, indicating height, width, and depth measurements.

Garantia i Suport

For warranty information or technical support, please refer to the warranty card included with your product or contact the manufacturer directly. Keep your proof of purchase for warranty claims.

Per obtenir més ajuda, visiteu el pàgina del producte a Amazon o contacteu amb el vostre distribuïdor.