KRUX Empero ATX PC Case User Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your KRUX Empero ATX PC Case. Please read this manual thoroughly before beginning assembly to ensure proper installation and safe operation. The KRUX Empero case is designed to accommodate ATX motherboards and offers extensive cooling options and component compatibility.

Figura 1: Part frontal view of the KRUX Empero ATX PC Case, showcasing its glass panels and pre-installed ARGB fans.

2. Característiques del producte

• Four 120mm ARGB PWM Fans: Pre-installed for efficient cooling and customizable lighting.
• ARGB Controller Splitter: Manages fan lighting and synchronization.
• Panells de vidre: Front and side tempered glass panels provide an unobstructed view de components interns.
• Disseny de doble cambra: Separates the power supply and storage drives from the main components for improved airflow and aesthetics.
• Liquid Cooler Compatibility: Supports 120mm, 240mm, 280mm, and 360mm liquid cooling radiators.
• Modern Front I/O: Includes a USB-C port, USB 3.0 port, and audio jacks for convenient connectivity.
• Liquidació de la GPU: Accommodates graphics cards up to 420mm in length.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents al paquet:

• KRUX Empero ATX PC Case
• 4 ventiladors ARGB PWM de 120 mm (preinstal·lats)
• ARGB Controller Splitter (pre-installed)
• Caixa d'accessoris (cargols, brides de cable, separadors)
• Manual d'usuari

Figura 2: Explotat view illustrating the various components of the KRUX Empero PC case, including panels, frame, and fans.

4. Configuració i instal·lació

Follow these steps for proper component installation.

4.1 Eliminació de panells

1. Carefully remove the tempered glass side panel by unscrewing the thumb screws at the rear of the case.
2. Remove the front glass panel if necessary for fan or radiator installation.

4.2 Instal·lació de la placa base

1. Instal·leu la protecció d'E/S a l'obertura posterior de la carcassa.
2. Alineeu la placa base ATX amb els separadors preinstal·lats.
3. Fixeu la placa base amb els cargols proporcionats.

4.3 Instal·lació de la unitat d'alimentació (PSU).

The KRUX Empero features a dual-chamber design. The PSU is installed in the rear chamber.

1. Mount the PSU to the PSU bracket, typically located at the rear bottom of the case.
2. Slide the PSU with its bracket into the designated compartment and secure it with screws.

4.4 Instal·lació de la unitat d'emmagatzematge

The case supports multiple storage drives. Refer to the case interior for specific mounting points for 2.5" SSDs and 3.5" HDDs.

1. Secure 2.5" SSDs to the dedicated mounting plates, often found behind the motherboard tray.
2. Install 3.5" HDDs into the drive cages, usually located in the PSU shroud area.

4.5 Instal·lació de la targeta gràfica (GPU)

The case supports GPUs up to 420mm in length.

1. Traieu les cobertes de les ranures PCIe necessàries a la part posterior de la carcassa.
2. Insert the GPU into the appropriate PCIe slot on your motherboard.
3. Fixeu la GPU amb cargols.

4.6 Instal·lació del sistema de refrigeració

The case comes with four 120mm ARGB PWM fans pre-installed. Additional fans or liquid coolers can be added.

• Fans: The case supports various fan configurations. Ensure proper airflow direction (intake/exhaust).
• Liquid Coolers: Radiators up to 360mm can be mounted. Consult your liquid cooler's manual for specific installation steps.

Figura 3: Interior view of the KRUX Empero case with the side panel removed, highlighting the spacious layout for components and cooling solutions.

4.7 Front I/O Connections

Connect the front panel cables to your motherboard according to your motherboard's manual.

• USB-C: Connect the USB-C header cable to your motherboard's USB 3.2 Gen 2 header.
• USB 3.0: Connect the USB 3.0 header cable to your motherboard's USB 3.0 header.
• USB 2.0: Connect the USB 2.0 header cable to your motherboard's USB 2.0 header.
• Àudio HD: Connect the HD Audio cable to your motherboard's audio header.
• Power SW, Reset SW, HDD LED, Power LED: Connect these small connectors to the corresponding pins on your motherboard's front panel header.
• Botó LED: Connect the LED button cable to the ARGB controller for lighting control.

Figure 4: Close-up of the top-front I/O panel, featuring USB-C, USB 3.0, audio ports, and control buttons.

5. Instruccions de funcionament

5.1 Encès

Once all components are installed and cables are connected, press the power button on the front I/O panel to start your system.

Control del ventilador 5.2 ARGB

The pre-installed ARGB fans are connected to a controller. Use the dedicated LED button on the front I/O panel to cycle through various lighting modes and colors. For advanced control, connect the controller to your motherboard's ARGB header (if available) and use the motherboard's software.

6. Manteniment

Un manteniment regular ajuda a garantir un rendiment òptim i una major longevitat de la carcassa del teu PC.

• Filtres de pols: The KRUX Empero case includes removable dust filters. Periodically remove and clean these filters with compressed air or water (ensure they are completely dry before reinstallation).
• Panells de vidre: Clean tempered glass panels with a soft, lint-free cloth and a glass cleaner. Avoid abrasive materials that could scratch the surface.
• Neteja interior: Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.

7. Solució De Problemes

Si teniu problemes durant o després de la instal·lació, tingueu en compte els passos habituals següents per resoldre problemes:

• Sense energia: Assegureu-vos que la font d'alimentació estigui engegada, que tots els cables d'alimentació (CPU de 24 pins, CPU de 8 pins, GPU PCIe) estiguin connectats correctament i que el cable de l'interruptor d'alimentació del panell frontal estigui connectat correctament a la placa base.
• Fans Not Spinning/No ARGB: Check fan power connections to the motherboard or controller. Verify ARGB cables are properly connected to the controller and/or motherboard header.
• Sense pantalla: Confirm the monitor cable is connected to the graphics card (not the motherboard's integrated graphics port, unless using integrated graphics). Reseat the graphics card and RAM modules.
• Els ports USB no funcionen: Ensure the front panel USB 3.0 and USB-C cables are correctly connected to the motherboard headers.

8. Especificacions

9. Garantia i Suport

Specific warranty information for the KRUX Empero ATX PC Case is not provided in this document. For detailed warranty terms, technical support, or further assistance, please refer to the official KRUX weblloc o poseu-vos en contacte amb el vostre distribuïdor.