Introducció
Thank you for choosing the FALCAM TreeRoot C141K-301 Carbon Fiber Travel Tripod Kit. This manual provides essential information for the safe and effective use of your new tripod. Please read it thoroughly before operation and retain it for future reference.
Image: FALCAM TreeRoot Quick Lock Lite Tripod C141K-301, highlighting its ultra-stable, ultra-swift, and ultra-light design.
Informació de seguretat
- Do not exceed the maximum load capacity of 40kg (80lbs) for the tripod and 3kg for the ball head.
- Ensure all locks are securely fastened before mounting equipment or leaving the tripod unattended.
- Eviteu exposar el trípode a temperatures extremes o substàncies corrosives.
- Mantingueu les mans i els dits allunyats de les peces mòbils quan ajusteu el trípode.
- Do not use the tripod as a climbing aid or for purposes other than supporting camera equipment.
- When using the spiked feet, exercise caution to prevent injury.
Contingut del paquet
Verifiqueu que tots els elements siguin presents al vostre paquet:
- FALCAM TreeRoot C141K-301 Carbon Fiber Tripod
- Ball Head Model 301
- Bossa de trípode
- Wrench (for adjustments)
Image: The FALCAM TreeRoot C141K-301 Carbon Fiber Travel Tripod Kit with ball head attached.
Producte acabatview
The FALCAM TreeRoot C141K-301 is a compact and stable carbon fiber travel tripod designed for photographers. It features 4-section round tube legs, a quick-lock mechanism, and an F38 quick-release ball head.
Característiques principals:
- Construcció de fibra de carboni: Ensures lightweight portability and high stability.
- F38 Quick Release System: Allows for rapid camera attachment and detachment.
- 1/3 Limited Lock Legs: Enables smooth and quick leg deployment.
- Alta capacitat de càrrega: Supports up to 40kg (80lbs).
- Removable Center Column: Provides flexibility for low-angle shots or monopod conversion.
- Multi-Surface Foot Pads: Adaptable for various terrains, with reversible spiked tips.
Image: Collage illustrating key features including thickened carbon fiber leg tubes, F38 Quick Release, 1/3 Limited Lock, and upright ball head control.
Configuració
1. Desplegament de les potes del trípode
- Hold the tripod firmly and release the leg locks.
- Extend each leg section to the desired length. The 1/3 Limited Lock system allows for quick deployment without flipping.
- Ensure each leg section is securely locked before placing weight on the tripod.
Image: A hand demonstrating the quick release mechanism on a tripod leg for extension.
2. Ajustar l'angle de les cames
Each leg can be independently adjusted to different angles for stability on uneven terrain or for low-angle shooting. Press the auto-reset angle lock button at the top of each leg to change its angle.
Imatge: Detallada view of the auto-reset angle lock button, O-ring seals on leg sections, and the multi-function hook.
3. Attaching the Ball Head
The ball head comes pre-attached. If removed, ensure it is securely screwed onto the tripod's mounting plate. The F38 Quick Release Ball Head (Model 301) provides precise control over camera positioning.
Image: Close-up of the FALCAM ball head, showing its design and locking mechanisms.
Instruccions de funcionament
1. Mounting Your Camera (F38 Quick Release System)
- Attach the F38 quick release plate to the bottom of your camera. Ensure it is tightened securely.
- Align the quick release plate on your camera with the F38 receiver on the ball head.
- Press the release button on the F38 receiver and slide the camera into place until it clicks and locks.
- Important: For secure locking, align your camera lens with the ball head's directional indicator during use. The anti-mistouch design disables the release button in lock mode.
Image: Diagram showing the F38 Quick Release system, including anti-loosening washers and anti-deflection plate, and a user mounting a camera in 1 second.
2. Ajust del capçal esfèric
The ball head features a trigger control for all movement. Simply unlock the trigger to adjust the ball head, pan horizontally, or switch between horizontal and vertical shooting. Precision scales are provided for accurate framing.
- 360° Ball Rotation: Loosen the main locking knob to adjust the camera angle freely.
- 360° Panning: Use the separate panning lock knob for smooth horizontal rotation.
- Tret vertical: Utilize the drop notch on the ball head for quick vertical orientation.
Image: Illustration of the F38 Quick Release Trigger Upright Ball Head (301) demonstrating 360° ball rotation, 360° panning, and vertical shooting capabilities, along with precision scales.
3. Using the Center Column
The center column can be extended for additional height or reversed for low-angle macro photography. It is also removable for maximum flexibility, allowing for extremely low working heights.
Image: Two photographers demonstrating the maximum working height (153cm) and minimum working height (18cm) with the removable center column.
4. Adapting to Terrain
The tripod is designed for all-terrain stability. The foot pads can be adjusted to suit various surfaces. For soft ground, sand, or ice, the multi-surface foot pads can be reversed to reveal three-pronged spikes for enhanced grip.
Image: Close-up of the tripod leg showing the spiked foot design for improved grip on soft surfaces.
Image: A photographer using the tripod on rugged terrain, with insets showing the multi-surface foot pads and the three-pronged spike design.
5. Using the Multi-Function Hook
A multi-function hook is located at the bottom of the center column. This can be used to hang sandbags or backpacks to add stability to the tripod, especially in windy conditions.
Manteniment
- Neteja: Netegeu el trípode amb un drap suauamp drap després de cada ús, especialment si s'utilitza en ambients polsegosos, sorrencs o humits. Eviteu productes químics agressius.
- Lubricació: Periodically check leg locks and ball head mechanisms for smooth operation. Do not over-lubricate; consult FALCAM support if lubrication is needed.
- Emmagatzematge: Store the tripod in its provided bag in a dry, cool place away from direct sunlight.
- O-Ring Seals: The leg sections feature O-ring seals to reduce sand and dust ingress. Regularly inspect these seals for wear and tear.
- Clau anglesa: Use the included wrench for any necessary adjustments to leg tension or ball head components. The magnetic tip is reversible.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Les potes del trípode no s'estenen/retreuen suaument. | Dirt or debris in leg sections; leg locks too tight/loose. | Clean leg sections. Adjust leg lock tension with the included wrench. |
| Camera not securely locking onto ball head. | Quick release plate not properly attached to camera; F38 receiver not fully engaged. | Ensure quick release plate is tight on camera. Re-insert camera into F38 receiver until an audible click is heard and the release button is disabled. Align lens with directional indicator. |
| Ball head movement is stiff or loose. | Main locking knob not adjusted correctly. | Tighten or loosen the main locking knob on the ball head to achieve desired tension. |
| Tripod unstable. | Legs not fully extended/locked; uneven ground; overloaded. | Ensure all leg sections are fully extended and locked. Adjust leg angles for stability on uneven surfaces. Do not exceed maximum load capacity. Use the multi-function hook for added weight. |
Especificacions
| Característica | Detall |
|---|---|
| Nom del model | C141K-301 (Tripod), 301 (Ball Head) |
| Material | Aliatge d'alumini + fibra de carboni |
| Net Weight (Tripod) | Aprox. 1.3 kg (2.87 lliures) |
| Net Weight (Ball Head) | Aprox. 0.14 kg (0.31 lliures) |
| Leg Tube Diameter | Ø26mm, Ø22mm, Ø17.9mm, Ø13.8mm |
| Seccions de cames | 4 |
| Longitud plegada | Aprox. 472 mm (18.6 polzades) |
| Max Working Height | Aprox. 1530 mm (60.2 polzades) |
| Min Working Height | Aprox. 185 mm (7.3 polzades) |
| Leg Load Capacity | Aprox. 40 kg (80 lliures) |
| Capacitat de càrrega de la columna central | 10kg (extended), >20kg (retracted) |
| Diàmetre del capçal esfèric | 30 mm |
| Capacitat de càrrega del capçal esfèric | 3 kg (6.6 lliures) |
| Ball Head Locking Force | 4 Nm |
| Panoramic Direction Locking Force | 4 Nm |
| Dispositius compatibles | Càmera |
| Color | Negre |
| Nivell de resistència a l'aigua | No resistent a l'aigua |
Image: Detailed specifications for the Tripod Model C141K-301 and Ball Head Model 301, including material, weight, dimensions, and load capacities.
Informació de la garantia
The FALCAM TreeRoot C141K-301 Carbon Fiber Travel Tripod Kit comes with a 6 anys de garantia. This warranty covers manufacturing defects and ensures reliable performance under normal use. For specific terms and conditions, please refer to the official FALCAM warranty policy or contact customer support.
Nota: The product specifications also mention a "2 Year Manufacturer" warranty. Please refer to the 6-Year Warranty as the primary coverage for this product as stated in the product features.
Atenció al client
For technical assistance, warranty claims, or any questions regarding your FALCAM TreeRoot C141K-301 tripod, please visit the official FALCAM weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Podeu trobar més informació i recursos d'assistència a FALCAM Store on Amazon.