TECKNET HSL01003BA01

TECKNET 4200Lm Solar Lights Outdoor User Manual

Model: HSL01003BA01

Introducció

Thank you for choosing TECKNET 4200Lm Solar Lights. These outdoor lights are designed to provide efficient and reliable illumination for your yard, garden, deck, and other outdoor spaces. Featuring advanced motion sensing technology, multiple lighting modes, and a durable waterproof design, these lights offer enhanced security and convenience.

Two TECKNET 4200Lm Solar Lights with solar panels and motion sensors

Image: Two TECKNET 4200Lm Solar Lights, showcasing their design with integrated solar panels and motion sensors.

Informació de seguretat

Si us plau, llegiu atentament totes les instruccions de seguretat abans de la instal·lació i l'ús. Conserveu aquest manual per a futures consultes.

  • Ensure the solar panel receives direct sunlight for optimal charging. Avoid shaded areas.
  • Do not disassemble, repair, or modify the product. This may cause damage and void the warranty.
  • Keep the product away from fire and extreme heat sources.
  • Do not immerse the product in water, despite its waterproof rating. It is designed to withstand rain and splashes, not submersion.
  • Install the light at a height where the motion sensor can effectively detect movement (typically 6-10 feet from the ground).

Producte acabatview

The TECKNET Solar Light features a robust design with key components for optimal performance.

  • Panell solar: Converts sunlight into electricity to charge the internal battery.
  • 416 LED d'alta eficiència: Provide bright and wide illumination.
  • Sensor de moviment PIR: Detects movement to activate lighting modes.
  • Sensor de llum: Detects ambient light levels to automatically turn the light on/off.
  • Durable ABS Casing: Ensures IP66 waterproof and weather-resistant performance.
Diagram showing product dimensions and installation options for the solar light

Image: Product dimensions (4.1 inch/10.5cm height, 8.6 inch/22cm length, 2.5 inch/6.4cm width) and three installation methods: Screw Mounting, Double-sided Adhesive, and Rope Hanging.

Configuració i instal·lació

Proper installation ensures optimal performance of your solar lights.

Càrrec inicial:

Before first use, expose the solar panel to 6+ hours of direct sunlight for ample absorption. This ensures the internal 1800mAh rechargeable battery is sufficiently charged.

Selecció d'una ubicació:

  • Select a location that receives direct sunlight for most of the day to maximize charging efficiency.
  • Ensure the chosen spot allows the motion sensor to cover the desired area (13 to 20 feet detection range, 120° wide-angle coverage).
  • Avoid installing near other strong light sources at night, as this may prevent the solar light from activating.
Illustration of a solar light mounted on a house, showing a 300 degree lighting angle and 376 square feet lighting area

Image: The solar light provides a 300° wider lighting angle, illuminating an area of approximately 376 sq ft with a sensing distance of 13-20 feet.

Opcions de muntatge:

The TECKNET Solar Lights offer flexible installation methods:

  1. Muntatge de cargols: Use the included screws to securely fasten the light to a wall, fence, or other solid surface.
  2. Adhesiu de doble cara: For lighter applications or temporary placement, use strong double-sided tape (not always included, check packaging).
  3. Rope Hanging: Utilize the designated holes to hang the light with a rope or cable.
Three diagrams showing screw mounting, double-sided adhesive, and rope hanging installation methods for the solar light

Image: Visual guide for installation methods: Screw Mounting, Double-sided Adhesive, and Rope Hanging. For initial use, expose the panel to 6+ hours of direct sunlight.

Modes de funcionament

The TECKNET Solar Light features three intelligent lighting modes to suit various needs. Use the mode button (if available, typically a small pinhole button) to cycle through the modes.

Diagram illustrating three lighting modes: Always On, Dim Light Sensor, and Strong Light Sensor

Image: Visual representation of the three intelligent lighting modes: Always On Mode (50% light), Dim Light Sensor Mode (30% light, 100% on motion), and Strong Light Sensor Mode (0% light, 100% on motion).

  1. Mode 1: Mode sempre encès

    The light automatically turns on at night at a consistent brightness (e.g., 50% light) and stays on until dawn or battery depletion. No motion detection in this mode.

    Illustration of Mode 1 where the light stays on at 50% brightness all night

    Image: Mode 1, showing the light automatically illuminating at night at 50% brightness, providing all-night illumination.

  2. Mode 2: Dim-to-Bright Mode

    The light stays at a dim brightness (e.g., 30% light) at night. When motion is detected, it brightens to full (100%) for 15-25 seconds, then returns to dim mode.

    Illustration of Mode 2 where the light is dim and brightens to 100% upon motion detection

    Image: Mode 2, showing the light at 30% brightness when no motion, brightening to 100% for 15-25 seconds upon motion detection, then dimming again.

  3. Mode 3: Off-to-Bright Mode

    The light remains off at night. When motion is detected, it activates to full brightness (100%) for 15-25 seconds, then turns off again.

    Illustration of Mode 3 where the light is off and activates to 100% upon motion detection

    Image: Mode 3, showing the light remaining off when no motion, activating to 100% brightness for 15-25 seconds upon motion detection, then turning off.

Càrrega i durada de la bateria

The TECKNET Solar Lights are designed for energy efficiency and long-lasting performance.

  • High Conversion Rate: The solar panel boasts an impressive 27% conversion rate, ensuring efficient charging even on less sunny days.
  • Temps de càrrega: Typically requires 6-8 hours of direct sunlight for a full charge.
  • Durada de la il·luminació: A fully charged light can provide 10-12 hours of consistent, bright illumination each night, depending on the selected mode and motion frequency.
Diagram showing solar light charging during the day and lighting up at night

Image: Illustration of the solar light's higher conversion efficiency, showing fast charging (6-8 hours) during the day and automatic lighting up (10-12 hours) at night.

Comparison of solar light charging during the day and lighting at night

Image: The solar light automatically turns off during the daytime for charging (6-8 hours) and automatically turns on at night for lighting (10-12 hours).

Manteniment

To ensure the longevity and optimal performance of your TECKNET Solar Lights, follow these maintenance guidelines:

  • Netegeu el panell solar: Netegeu regularment el panell solar amb un drap suau iamp drap per eliminar la pols, la brutícia i les restes. Un panell net garanteix la màxima absorció de la llum solar.
  • Elimina les obstruccions: Periodically check that no leaves, branches, or other objects are shading the solar panel or obstructing the motion sensor.
  • Inspeccionar per danys: Occasionally inspect the light for any physical damage to the casing o components.
  • Resistència a la intempèrie: The IP66 waterproof rating means it can withstand rain, snow, and frost. No special winterization is typically required, but clearing heavy snow from the panel is recommended.
Images showing the solar light's IP66 waterproof rating and resistance to heat and frost

Image: The solar light is IP66 waterproof, designed to be heat-resistant and frost-resistant, making it suitable for all weather conditions.

Resolució de problemes

If you encounter issues with your TECKNET Solar Lights, refer to the following common problems and solutions:

ProblemaCausa possibleSolució
La llum no s'encén a la nit.Insufficient solar charge; solar panel is dirty or obstructed; light sensor detects too much ambient light.
  • Assegureu-vos que el panell solar rebi de 6 a 8 hores de llum solar directa al dia.
  • Netegeu el panell solar.
  • Relocate the light away from other strong light sources (e.g., streetlights, porch lights).
Motion sensor is not working or is too sensitive/insensitive.Incorrect installation height; sensor obstructed; extreme temperatures affecting sensor.
  • Adjust installation height to optimize detection range (13-20 feet).
  • Ensure nothing is blocking the sensor's view.
  • Test in moderate temperatures.
La durada de la llum és més curta del que s'esperava.Insufficient solar charge; frequent motion activation in high-brightness modes; aging battery.
  • Ensure maximum direct sunlight exposure for charging.
  • Consider using Mode 1 (Always On) or Mode 2 (Dim-to-Bright) for longer duration if motion is constant.
  • Battery replacement may be needed after several years of use (contact support).

Especificacions

CaracterísticaDetall
Número de modelHSL01003BA01
Quantitat de LED416 LED
Brillantor4200Lm (Lumens)
Angle d'il·luminació300° (3-sided lighting)
Rang de detecció del sensor de moviment13-20 peus (4-6 metres)
Angle del sensor de moviment120° PIR
Taxa de conversió solarFins al 27%
Capacitat de la bateria1800 mAh (recarregable)
Temps de càrrega6-8 hores (raig solar directa)
Durada de la il·luminació10-12 hores (després de la càrrega completa)
Classificació impermeableIP66
MaterialABS d'alt impacte
Dimensions del producte10 x 6 x 22 cm (aprox. 4.1 x 2.5 x 8.6 polzades)

Garantia i Suport

TECKNET products are built with quality and reliability in mind. For warranty information and customer support, please refer to the following:

  • Garantia: Please check the product packaging or the official TECKNET weblloc web per conèixer els termes i la durada específics de la garantia.
  • Atenció al client: For any questions, technical support, or warranty claims, please contact TECKNET customer service through their official weblloc web o el venedor on vau comprar el producte.
  • Recursos en línia: Visita el Botiga TECKNET a Amazon per a més informació i actualitzacions del producte.

© 2025 TECKNET. Tots els drets reservats.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.