PIX Link LV-WR09 300Mbps Wireless-N Repeater/Router/AP User Manual

Producte acabatview

The PIX Link LV-WR09 is a versatile wireless networking device designed to extend your Wi-Fi coverage and provide flexible network solutions. It supports three primary modes of operation: Repeater Mode, Router Mode, and Access Point (AP) Mode, offering 300Mbps wireless-N speeds. This device is ideal for eliminating Wi-Fi dead zones and enhancing network performance in homes and small offices.

Imatge: Frontal view of the PIX Link LV-WR09 Wireless-N Repeater/Router/AP. The device is white, rectangular, and features four external antennas. On the front panel, there are several green LED indicator lights for power, Wi-Fi, LAN, and signal strength. A power plug is visible on the right side.

Contingut del paquet

Si us plau, verifiqueu que tots els elements siguin presents al vostre paquet:

• 1 x PIX Link LV-WR09 Wireless-N Repeater/Router/AP
• 1 x cable Ethernet
• 1 x Guia d'instal·lació ràpida

Configuració

Instal·lació de maquinari

1. Encès: Plug the device into a standard electrical outlet. Ensure the Power LED illuminates.
2. Espera la inicialització: Allow approximately 30-60 seconds for the device to boot up. The indicator lights will stabilize.

Modes de configuració

The LV-WR09 supports three operational modes:

• Mode de repetidor: Amplia l'abast d'una xarxa sense fil existent.
• Mode d'encaminador: Creates a new private wireless network, typically connected to a modem.
• Mode de punt d'accés (AP): Transforms a wired network connection into a wireless one.

Repeater Mode Setup (Recommended for Wi-Fi Extension)

1. Connect to Repeater's Wi-Fi: On your computer or mobile device, connect to the Wi-Fi network named "Wireless-N" or similar (no password required initially).
2. Accés Web IU: Obre a web navegador i entreu 192.168.10.1 a la barra d'adreces. Premeu Retorn.
3. Inici de sessió: Introduïu el nom d'usuari i la contrasenya predeterminats (normalment admin per a tots dos).
4. Select Repeater Mode: On the setup page, choose "Repeater Mode".
5. Escaneja per a xarxes: The device will scan for available Wi-Fi networks. Select your desired network from the list.
6. Introduïu la contrasenya: Input the Wi-Fi password for your selected network. You may also set a new SSID for the extended network if desired.
7. Aplica la configuració: Click "Apply" or "Save". The device will restart.
8. Torneu a connectar: After restarting, connect your devices to the newly configured extended Wi-Fi network.

Configuració del mode d'encaminador

1. Connectar-se al mòdem: Connect an Ethernet cable from your modem's LAN port to the LV-WR09's WAN/LAN port.
2. Connecteu-vos a la xarxa Wi-Fi del router: Connect your computer or mobile device to the LV-WR09's default Wi-Fi network.
3. Accés Web IU: Obre a web navegador i entreu 192.168.10.1. Login with default credentials.
4. Select Router Mode: Choose "Router Mode" from the setup options.
5. Configure WAN Settings: Select your internet connection type (e.g., PPPoE, Dynamic IP, Static IP) and enter the required details provided by your ISP.
6. Configura els paràmetres sense fil: Set your desired Wi-Fi network name (SSID) and password.
7. Aplica la configuració: Save the configuration. The device will restart.

AP Mode Setup

1. Connectar-se a la xarxa amb cable: Connect an Ethernet cable from your existing router/switch's LAN port to the LV-WR09's WAN/LAN port.
2. Connect to AP's Wi-Fi: Connect your computer or mobile device to the LV-WR09's default Wi-Fi network.
3. Accés Web IU: Obre a web navegador i entreu 192.168.10.1. Login with default credentials.
4. Seleccioneu el mode AP: Choose "AP Mode" from the setup options.
5. Configura els paràmetres sense fil: Set your desired Wi-Fi network name (SSID) and password.
6. Aplica la configuració: Save the configuration. The device will restart.

Funcionament del vostre dispositiu

Llums indicadores

Understanding the LED indicators helps monitor the device's status:

Dispositius de connexió

Once configured, you can connect your devices:

• Dispositius sense fil: Cerca the Wi-Fi network name (SSID) you configured and enter the password.
• Dispositius amb cable: Connect devices like PCs, gaming consoles, or smart TVs to the LAN port(s) using an Ethernet cable.

Manteniment

To ensure optimal performance and longevity of your device, consider the following maintenance tips:

• Actualitzacions de firmware: Reviseu periòdicament el fabricant website for new firmware versions. Updating firmware can improve performance, add features, and fix bugs.
• Col·locació òptima: Place the device in a central location, away from obstructions (thick walls, metal objects) and sources of interference (microwaves, cordless phones).
• Neteja: Gently clean the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation holes are not blocked.
• Reiniciar periòdicament: A periodic restart (unplugging and replugging after 10 seconds) can help clear temporary issues and refresh network connections.

Resolució de problemes

Si teniu problemes, consulteu els següents problemes i solucions habituals:

• Sense accés a Internet:
  • Check if your main router/modem has internet access.
  • Verifiqueu que tots els cables estiguin connectats correctament.
  • Restart the LV-WR09 and your main network equipment.
  • Re-check the configuration settings in the web UI, especially the Wi-Fi password if in Repeater mode.
• Weak Signal or Dead Zones Persist:
  • Relocate the LV-WR09 to a position halfway between your main router and the dead zone.
  • Ajusteu les antenes per a una millor recepció del senyal.
  • Ensure there are no major physical obstructions.
• No es pot accedir Web Management Page (192.168.10.1):
  • Ensure your device is connected to the LV-WR09's Wi-Fi network or via Ethernet.
  • Esborra la memòria cau del navegador o prova un altre navegador.
  • Desactiveu temporalment qualsevol tallafocs o programari antivirus.
  • If all else fails, perform a factory reset (see below).
• Forgot Login Password or Wi-Fi Password:
  • Restabliment de fàbrica: With the device powered on, use a pin or paperclip to press and hold the Reset button (usually a small hole) for about 5-10 seconds until the lights flash. The device will revert to factory default settings, and you can reconfigure it.

Especificacions tècniques

• Model: LV-WR09
• Estàndards sense fil: IEEE 802.11b/g/n
• Freqüència: 2.4 GHz
• Velocitat de dades: Fins a 300 Mbps
• Antenes: 4 antenes externes
• Ports: 1 x 10/100Mbps WAN/LAN Port, 1 x 10/100Mbps LAN Port
• Seguretat: WPA-PSK/WPA2-PSK, WPA/WPA2
• Font d'alimentació: CA 100-240V, 50/60Hz
• Modes de funcionament: Repeater, Router, AP

Garantia i Suport

This product comes with a standard manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the warranty card included in your package or contact the retailer where you purchased the device. For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact the manufacturer or your local distributor. Contact information can typically be found on the product packaging or the manufacturer's official weblloc.