1. Producte acabatview
This GT POWER AC Adapter (Model 307) is designed to provide reliable power to compatible Binary HDMI Splitters. It features a threaded locking power supply connector for secure attachment and a 48-inch heavy-duty power cable. The adapter supports a wide input voltage range of 100-240VAC, 50/60Hz, making it suitable for international use.
Key protective features include:
- OVP (Over Voltage Protecció): Safeguards connected devices from excessive voltage.
- OCP (Protecció sobre corrent): Prevents damage from overcurrent conditions.
- SCP (Protecció contra curtcircuits): Protects against short circuits, ensuring safe operation.
Image 1.1: The GT POWER AC Adapter, showing the main unit and the threaded locking DC output connector.
2. Informació de seguretat
Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected devices.
- Use this adapter only with devices specified as compatible.
- Ensure the adapter's voltage and current ratings match the requirements of your device.
- No exposeu l'adaptador a l'aigua, la humitat ni a temperatures extremes.
- Do not disassemble or attempt to repair the adapter. Refer servicing to qualified personnel.
- Mantingueu l'adaptador lluny dels nens.
- Desendolleu l'adaptador de la presa de corrent quan no l'utilitzeu durant períodes prolongats.
- Assegureu-vos d'una ventilació adequada al voltant de l'adaptador durant el funcionament.
3. Contingut del paquet
El paquet inclou:
- 1 x GT POWER AC/DC Power Adapter (Model 307) with integrated 48-inch heavy-duty power cable and threaded locking DC connector.
4. Instruccions de configuració
- Verificar la compatibilitat: Ensure your Binary HDMI Splitter (e.g., B-240-HDSWTCH-5x1, B-260-444-HDR-SP12SA, B-260-444-HDR-SP14, B-260-444-HDR-SP18) requires a 12V DC power input and is compatible with a threaded locking connector.
- Connect DC Output: Locate the DC power input port on your Binary HDMI Splitter. Insert the threaded locking DC connector from the GT POWER adapter into this port. Gently twist the threaded collar clockwise until it is finger-tight to secure the connection.
- Connecteu l'entrada de CA: Plug the AC prongs of the GT POWER adapter into a standard wall power outlet (100-240VAC, 50/60Hz).
- Encès: Once both connections are secure, your Binary HDMI Splitter should receive power. Refer to your splitter's manual for specific power-on procedures.
Imatge 4.1: Primer pla view of the threaded locking DC connector, designed for a secure power connection.
Image 4.2: The GT POWER AC Adapter with its AC prongs ready for connection to a wall outlet.
5. Instruccions de funcionament
The GT POWER AC Adapter operates automatically once connected to a power source and a compatible device. It provides a stable 12V DC output. There are no user-adjustable settings on the adapter itself.
- Ensure the adapter is always connected to a properly grounded power outlet.
- Avoid placing the adapter in enclosed spaces where heat can build up.
- Do not pull the cable to disconnect the adapter from the wall outlet; always grasp the adapter body.
6. Manteniment
The GT POWER AC Adapter requires minimal maintenance.
- Neteja: Desconnecteu l'adaptador de totes les fonts d'alimentació abans de netejar-lo. Feu servir un drap suau i sec per netejar l'exterior. No utilitzeu netejadors líquids ni dissolvents.
- Emmagatzematge: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly coiling the cable to prevent damage.
- Inspecció: Periodically inspect the power cable and adapter housing for any signs of damage, such as cuts, fraying, or cracks. If damage is found, discontinue use and replace the adapter.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No power to device. | L'adaptador no està connectat. Loose DC connector. Mal funcionament de la presa de corrent. Adaptador danyat. | Ensure AC adapter is fully plugged into a live wall outlet. Securely tighten the threaded DC connector to the device. Proveu la presa amb un altre dispositiu. Discontinue use and replace the adapter if damaged. |
| Device not functioning correctly after connecting adapter. | Incorrect adapter used. Mal funcionament del dispositiu. | Verify the adapter's output voltage (12V DC) and connector type match your device's requirements. Consult your device's manual or manufacturer for further troubleshooting. |
| L'adaptador es escalfa excessivament. | Poca ventilació. Sobrecàrrega. Falla interna. | Assegureu-vos que l'adaptador estigui en una zona ben ventilada. Verify the connected device's power requirements do not exceed the adapter's capacity. Discontinue use immediately and replace the adapter. |
8. Especificacions
| Marca | GT POWER |
| Número de model | 307 |
| Entrada Voltage | 100-240VAC, 50/60Hz |
| Vol. De sortidatage | 12 volts (CC) |
| Tipus de connector | Threaded Locking DC Connector |
| Longitud del cable | 48 inches (approx. 1.2 meters) |
| Característiques especials | OVP, OCP, SCP Protection |
| Dispositius compatibles | Binary B-240-HDSWTCH-5x1, B-260-444-HDR-SP12SA, B-260-444-HDR-SP14, B-260-444-HDR-SP18 HDMI Splitters |
| UPC | 800185029601 |
9. Garantia i Suport
This GT POWER AC Adapter comes with a Un any de garantia des de la data de compra. A més, un Garantia de devolució de 30 dies s'ofereix.
For technical support, warranty claims, or further assistance, please contact GT POWER customer service through your retailer or the official GT POWER support channels.
Si us plau, conserveu el comprovant de compra per motius de garantia.