mGYDY Bafang 810S LCD eBike Display User Manual

1. Introducció

This manual provides essential information for the installation, operation, and maintenance of your mGYDY Bafang 810S LCD eBike Display. Please read this manual thoroughly before using the product to ensure proper function and safety.

2. Informació de seguretat

• Assegureu-vos sempre que la pantalla estigui ben muntada abans de conduir.
• Do not attempt to disassemble or modify the display. This may void the warranty and cause damage.
• Keep the display away from extreme temperatures and direct sunlight for prolonged periods.
• Ensure all connections are dry and properly sealed before use, especially in wet conditions.
• Pay attention to your surroundings while riding. Do not become overly distracted by the display.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• 1 x Bafang 810S LCD Display
• 1 x Display Holder
• Gaskets for installation

4. Producte acabatview

The mGYDY Bafang 810S LCD eBike Display is designed to provide essential riding data and control for your Bafang mid-drive motor system. It features a color VA LCD screen for clear visibility in various lighting conditions.

Imatge: Acabatview of the Bafang 810S display showing various instrument features such as headlamps, speed loop, battery display, speed display, assist gear, fault prompt, walking mode, brake prompt, mileage mode, and mileage display.

Característiques principals:

• Color VA LCD: Ample viewing angle, no flicker, high brightness for better visual effect under sunlight.
• Independent Button: Easy to operate interface.
• Visualització completa de dades: Speed (Real-time, MAX, AVG), Mileage (Odometer, Trip distance, Riding Time), Battery indicator (5-level, Voltage per centtagi).
• Brillantor ajustable: Day and Night Mode with 5-level brightness adjustment (1: darkest; 5: brightest).
• Assistant Level Control: 3, 5, or 9 adjustable assist levels.
• Mode de caminada: Provides assistance when walking alongside your e-bike.
• Visualització del codi d'error: Indica errors del sistema.
• Grau impermeable: IP65, resistant to rain and splashing water.

5. Especificacions

Imatge: Detailed product parameters including dimensions, power supply, waterproof grade, and communication protocol.

6. Configuració i instal·lació

Comprovació de compatibilitat:

The 810S display is designed for Bafang mid-drive motors (BBS01, BBS02, BBSHD) that use the Protocol de comunicació UART i a 5-pin female plug. It is not compatible with CAN protocol motors or male plugs.

Imatge: Visual guide for checking compatibility with UART protocol 5-pin female connectors and Bafang BBS series or hub motors. Incompatible with CAN protocol motors.

Passos d'instal·lació:

1. Muntar la pantalla: Install the 810S display holder on the left side of your e-bike's handlebar. The holder is designed for handlebars with a diameter of φ22.2mm (0.87in). Secure it firmly using the provided gaskets and screws.
2. Connecteu el cable: Carefully connect the 5-pin female plug of the display to the corresponding 5-pin male plug on your e-bike's wiring harness. Ensure the connection is secure and fully seated.
3. Gestió de cables: Route the display cable neatly along the handlebar and frame, securing it with cable ties to prevent interference with moving parts.
4. Engegada inicial: After installation, power on your e-bike to verify the display functions correctly.

7. Instruccions de funcionament

The 810S display features an intuitive interface with an independent button for navigation and settings.

Funcions de visualització:

• Indicador de velocitat: Shows real-time speed, maximum speed (MAX), and average speed (AVG).
• Mileage Indicator: Displays Odometer (total distance), Trip distance, and Riding Time.
• Indicador de bateria: Provides a 5-level power indicator and voltage per centtage for accurate battery status.
• Assistant Level: Adjust pedal assist levels from 0-9 (or 3/5/9 depending on configuration).
• Control dels fars: Activate or deactivate your e-bike's headlight (if connected).
• Mode de caminada: Engage for low-speed assistance when pushing the bike.
• Codi d'error: Displays codes if a system fault is detected.

Imatge: The intelligent instrument panel displaying electricity, speed, current gear, battery level prompt, speed display, PAS levels, walking mode, and mileage time.

Ajust de configuració:

• Configuració de brillantor: Toggle between Day and Night modes. Adjust brightness through 5 levels (1 being darkest, 5 brightest) to suit ambient light conditions.
• Metric / Imperial: Set units according to your preference (Km/h or Mph, Km or Miles).
• Contrasenya d'engegada: Configure a password for added security (refer to your e-bike controller manual for specific instructions if applicable).

Imatge: Illustration of the display's brightness adjustment feature, showing optimal visibility in both day and night conditions.

8. Manteniment

Proper maintenance ensures the longevity and optimal performance of your 810S display.

• Neteja: Utilitzeu un suau, damp cloth to clean the display screen. Avoid abrasive cleaners or solvents that could damage the screen or casing.
• Resistència a l'aigua: The display has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. While it can withstand rain and splashes, avoid submerging it in water or exposing it to high-pressure washing.
• Emmagatzematge: When not in use for extended periods, store the e-bike and display in a dry, cool place, away from direct sunlight and extreme temperatures.
• Comprovació de la connexió: Periodically check the cable connection for any signs of wear or corrosion. Ensure it remains securely plugged in.

Imatge: The Bafang 810S display demonstrating its IP65 waterproof capability, showing it can resist rain and water splashing.

9. Solució De Problemes

If you encounter issues with your 810S display, refer to the following common troubleshooting tips:

• La pantalla no s'encén:
  • Comproveu si la bateria de la bicicleta elèctrica està carregada i engegada.
  • Verify that the 5-pin cable connection between the display and the controller is secure and undamaged.
• No Speed/Mileage Data:
  • Ensure the speed sensor on your e-bike is properly installed and aligned.
  • Check for any loose connections to the speed sensor.
• Codi d'error mostrat:
  • Note down the error code. Refer to your Bafang motor or controller manual for specific error code meanings and solutions.
  • Often, turning the e-bike off and on again can clear temporary errors.
• Lectures inexactes:
  • Ensure the wheel circumference setting in the display's advanced settings (if accessible) matches your e-bike's wheel size.

If problems persist, contact the seller or a qualified e-bike technician for assistance.

10. Garantia i Suport

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for warranty claims.