WEUASTE BSD01 Motorcycle Blind Spot Detection System User Manual

Producte acabatview

The WEUASTE BSD01 Motorcycle Blind Spot Detection System is designed to enhance rider safety by providing comprehensive 360° protection. It monitors vehicles approaching from behind, left, and right sides, alerting the rider to potential hazards within its operational range. This IP67-rated waterproof system ensures reliable performance in various weather conditions, offering crucial extra reaction time for safer lane changes and maneuvers.

Característiques principals:

• 360° Blind Spot Monitoring: Detects vehicles approaching from the rear and sides.
• 24GHz Millimeter Wave Sensor: Provides precise and reliable detection.
• Classificació impermeable IP67: Ensures all-weather performance in rain, fog, or snow.
• ACC Power Support: Automatic power on/off with motorcycle ignition, preventing battery drain.
• 130° Rear Blind Spot Zone: Monitors a wide area behind the motorcycle.
• 30-Meter Safety Perimeter: Alerts when vehicles enter this critical zone.
• Instal·lació fàcil de bricolatge: Warning lights attach with strong adhesive to rearview miralls.

Contingut del paquet

The WEUASTE BSD01 system includes all necessary components for installation and operation:

• Sensor de radar
• LED Indicator Lights (Left & Right)
• Power Harness with ACC support
• BSD Bracket
• Adhesiu de doble cara
• Installation Tools and Screws
• Binding Straps (x10)
• Cinta elèctrica
• Manual d'usuari

Figure 1: Contents of the WEUASTE BSD01 Motorcycle Blind Spot Detection System package.

Guia d'instal·lació

Follow these steps for proper installation of your WEUASTE BSD01 system:

1. Mounting the Radar Sensor:

1. Attach the double-sided adhesive to the host bracket.
2. Securely attach the host bracket to the radar sensor.
3. Mount the radar sensor at the back of the motorcycle. Ensure it is perpendicular to the ground at 90° and approximately 20 inches (50 cm) from the ground. The arrow on the sensor should point upwards.
4. Tighten the nuts with the provided wrench to secure the sensor.

Figure 2: Radar detection zone and sensor placement.

2. Installing LED Indicator Lights:

1. Identify the left (L) and right (R) warning lights.
2. Peel off the adhesive backing from the warning lights.
3. Attach the left warning light to the left rearview mirror and the right warning light to the right rearview mirror. Ensure they are clearly visible.

Figure 3: LED indicator lights mounted on rearview miralls.

3. Connexió d'alimentació:

1. Connect the positive wire of the power harness to your motorcycle's ACC (Accessory) line.
2. Connect the negative wire of the power harness to the battery terminal.
3. Secure all wiring using the provided binding straps and electrical tape to prevent interference and ensure durability.
4. The system will automatically power on and off with your motorcycle's ignition.

Figure 4: ACC power connection diagram.

Vídeos d'instal·lació:

Instruccions de funcionament

The WEUASTE BSD01 system operates automatically once installed and connected to the ACC power.

1. Activació automàtica: The system powers on automatically when your motorcycle is started and powers off when the ignition is turned off.
2. Detecció: The 24GHz millimeter wave sensor continuously monitors the 130° rear blind spot zone and a 30-meter safety perimeter.
3. Indicadors d'advertència:
   • When a vehicle approaches from the left rear, the left yellow light on your rearview mirror will illuminate.
   • When a vehicle approaches from the right rear, the right yellow light on your rearview mirror will illuminate.
   • When a vehicle approaches directly from behind, both red lights in the center of the indicators will light up simultaneously.
4. Rendiment en tot temps: The IP67 waterproof design ensures consistent radar detection performance even in heavy rain, fog, or snow.

Figure 5: Visual representation of the detection zones and warning lights.

Manteniment

To ensure optimal performance and longevity of your WEUASTE BSD01 system, follow these maintenance guidelines:

• Neteja regular: Keep the radar sensor and LED indicator lights clean from dirt, mud, and debris. Use a soft, damp cloth to wipe them gently. Avoid abrasive cleaners that could damage the surfaces.
• Inspecció del cablejat: Periodically check all wiring connections for any signs of wear, fraying, or loose connections. Ensure all cable ties are secure.
• Alineació del sensor: Verify that the radar sensor remains perpendicular to the ground and securely mounted. Any significant impact or vibration could alter its alignment.
• Comprovació d'adhesiu: Ensure the adhesive backing on the LED indicator lights remains firmly attached to your rearview mirrors. Reapply or replace if necessary.
• Eviteu l'aigua a alta pressió: While the system is IP67 waterproof, avoid directing high-pressure water directly at the sensor or indicator lights during washing, as this could potentially compromise seals over time.

Resolució de problemes

If you experience issues with your WEUASTE BSD01 system, refer to the following troubleshooting tips:

If issues persist after troubleshooting, please contact WEUASTE customer support for assistance.

Especificacions

• Marca: WEUASTE
• Model: WEUASTE BSD01
• Pes de l'article: 10.8 unces
• Dimensions del producte: 1.96 x 1.96 x 0.7 polzades
• Número de peça del fabricant: YY-BDS-2401
• Exterior: Pintat
• ASIN: B0F79LK6NP
• Data de primera disponibilitat: 2 de maig de 2025

Garantia i Suport

Your WEUASTE BSD01 Motorcycle Blind Spot System is backed by a 12 mesos de garantia. WEUASTE is committed to quality and customer satisfaction.

For any questions or concerns, our dedicated Suport tècnic 24/7 team is available to assist you. We guarantee to address all inquiries within 24 hours.

Please refer to your purchase documentation for specific warranty claim procedures or visit the official WEUASTE weblloc per obtenir informació de contacte.