Kiprim DC620S Programmable 400W DC Power Supply User Manual

Introducció

This manual provides essential information for the safe and efficient operation of your Kiprim DC620S Programmable DC Power Supply. Please read this manual thoroughly before use and retain it for future reference.

Instruccions de seguretat

ADVERTIMENT:

• Always connect the device to a properly grounded power outlet.
• No opereu en mullat o damp condicions.
• No obriu la c.asing; demaneu el servei tècnic a personal qualificat.
• Assegureu-vos una ventilació adequada per evitar el sobreescalfament.
• Verifiqueu el voltage and current settings before connecting to a circuit.

Figure 1: Rear panel with safety warnings and connections.

Contingut del paquet

Verifiqueu que hi hagi tots els elements en desempaquetar:

• 1 x Kiprim DC620S Programmable DC Power Supply (60V/20A)
• 1 x Manual d'usuari
• 1 x fusible
• 1 x Banana head to alligator clip cable
• 1 x cable d'alimentació
• 1 x U disk (containing software and drivers)

Figure 2: Included accessories with the DC620S unit.

Producte acabatview

Controls i pantalla del panell frontal

Figure 3: Front and rear panel components and their functions.

• Pantalla LCD TFT de 2.8 polzades: Mostra voltage, current, power, execution time, and output status. Can show data numerically or as a curve.
• Voltage Setting Key (V): Used to adjust output voltage.
• Tecla de configuració actual (I): Used to adjust output current.
• Més del voltage Protection (OVP) Key: Sets the overvoltage límit de protecció.
• Over Current Protection (OCP) Key: Sets the overcurrent protection limit.
• Botó de memòria: Saves and recalls up to 4 sets of channel parameters (M1-M4).
• Botó de commutació de la pantalla: Toggles between numerical and curve display modes.
• USB Charging Port (5V 1A): Per carregar dispositius mòbils.
• Terminals de sortida: Red (+) and Black (-) for connecting loads. Green terminal for ground strap.
• Voltage / Current Adjust Knob: Rotary encoder for fine-tuning voltage i la configuració actual.
• Tecla d'encesa/apagada: Alterna la sortida de potència.

Components del panell posterior

• Ventilador de refrigeració: Provides intelligent fan cooling to prevent overheating.
• Entrada d'alimentació de CA: Connecta el cable d'alimentació a la xarxa elèctrica.
• Device USB Port: For PC software control and firmware upgrades.
• Caixa de fusibles: Conté el fusible de protecció.
• Interruptor d'alimentació: Interruptor d'alimentació principal de la unitat.

Configuració

1. Connexió d'alimentació

1. Assegureu-vos que l'interruptor d'alimentació del panell posterior estigui en la posició "OFF".
2. Connect the provided power cable to the AC Power Input on the rear panel of the DC620S.
3. Plug the other end of the power cable into a grounded 110V AC power outlet.

2. Connexions de sortida

1. Connect your load to the output terminals using the banana head to alligator clip cable.
2. Ensure the red cable connects to the red (+) terminal and the black cable to the black (-) terminal.
3. For safety, connect the ground strap to the green terminal if required by your application.

PRECAUCIÓ:

Do not connect the power supply directly to a battery for charging without appropriate charging circuitry, as this can damage the unit or the battery. The device is not designed for direct battery charging.

Figure 4: Correct load connection and warning against direct battery charging.

3. PC Software and Driver Installation

1. Insert the provided U disk into your computer's USB port.
2. Install the PC software and drivers from the U disk.
3. Connect the DC620S to your computer using a USB cable via the Device USB Port on the rear panel for software control.

Figure 5: PC software control setup.

Instruccions de funcionament

1. Encès / apagat

1. Flip the main power switch on the rear panel to "ON".
2. Premeu el botó On/Off button on the front panel to enable or disable the output.

Figure 6: Location of the On/Off button.

2. Configuració Voltage i Actual

1. Premeu el botó V botó per seleccionar voltage adjustment. The voltage value on the display will blink.
2. Rotate the Voltage / Current Adjust Knob to set the desired voltage.
3. Premeu el botó I button to select current adjustment. The current value on the display will blink.
4. Rotate the Voltage / Current Adjust Knob to set the desired current.
5. Premeu el botó V or I button again to confirm the setting, or wait a few seconds for it to auto-confirm.

3. Multi-Function Display

The 2.8-inch color LCD displays real-time output voltage, current, actual output power, and cumulative execution time. It also shows the channel output status.

• Premeu el botó Mostra key to switch between numerical data display and curve display.

Figure 7: Display showing numerical and curve data.

4. Programmable Features (Memory and List Waveform)

Funció de memòria

• The unit can save 4 sets of channel parameters (M1 to M4).
• To save: Set desired voltage and current, then press and hold the Memòria button. Select a memory slot (M1-M4) using the knob and press the knob to confirm.
• To recall: Press the Memòria button. Select the desired memory slot (M1-M4) and press the knob to load the parameters.

Figure 8: Memory function display showing saved parameters.

List Waveform Output Settings

• The unit supports editing and outputting waveform sequences.
• A waveform set contains 10 editable points.
• For each point, you can set output voltage, output current, and waveform duration.
• Refer to the detailed instructions in the PC software manual for advanced waveform programming.

Figura 9: Example of a list waveform output on the display.

5. Port de càrrega USB

The front 5V 1A USB interface can be used to charge mobile phones or other compatible USB-powered devices.

Figure 10: Using the front USB charging port.

Manteniment

1. Neteja

Netegeu la unitat amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.

2. Ventilador de refrigeració

The intelligent fan cooling system operates automatically. Ensure the rear cooling fan is not obstructed to maintain proper airflow.

Figure 11: Cooling fan operation.

3. Substitució de fusibles

If the unit fails to power on, check the fuse located in the fuse box on the rear panel. Replace with a fuse of the same type and rating (e.g., F10A 250V for 110V AC input).

ADVERTIMENT:

Always disconnect the power cable before attempting to replace the fuse.

Resolució de problemes

Especificacions

Figura 12: Dimensions del producte.

Garantia i Suport

Informació de la garantia

The Kiprim DC620S Programmable DC Power Supply comes with a 12 mesos de garantia des de la data de compra.

Atenció al client

If you have any questions, require technical assistance, or need to claim warranty service, please contact Kiprim customer support through Amazon. We are committed to providing a satisfactory resolution to your inquiries.