VENTION ADCL0

VENTION Wireless HDMI Transmitter and Receiver User Manual

Model: ADCL0

1. Producte acabatview

The VENTION Wireless HDMI Transmitter and Receiver system (Model ADCL0) provides a seamless, cable-free solution for extending HDMI signals. This plug-and-play device supports high-definition video transmission up to 1080P@60Hz over distances of up to 164 feet (50 meters) in open environments. It operates on advanced 5GHz transmission technology, ensuring stable and low-latency performance for various applications, including home entertainment, business presentations, and educational settings.

The kit includes a transmitter (TX) and a receiver (RX), along with essential adapters for broad compatibility with different HDMI-enabled devices.

2. Què hi ha a la caixa

En desempaquetar, comproveu que hi hagi tots els components següents:

  • 1 transmissor HDMI sense fil (TX)
  • 1 x Receptor HDMI sense fil (RX)
  • 1 x HDMI Extension Cable (0.2m)
  • 2 x USB-C Power Cords (1m)
  • 1 x Micro HDMI Adapter
  • 1 x Mini HDMI Adapter
  • 1 x USB-C to HDMI Adapter
  • 1 x Manual d'usuari
Contents of the VENTION Wireless HDMI kit, including transmitter, receiver, various adapters, and cables.

Figure 2.1: Included components of the VENTION Wireless HDMI Transmitter and Receiver kit.

3. Guia de configuració

The VENTION Wireless HDMI system is designed for plug-and-play operation, requiring no software installation or network configuration.

3.1 Connexió bàsica

  1. Connecteu el receptor (RX): Plug the Wireless HDMI Receiver (RX) into an available HDMI input port on your display device (e.g., HDTV, projector, monitor). Connect a USB-C power cord to the RX unit and plug the other end into a USB power source (e.g., TV's USB port, USB wall adapter).
  2. Adjust Input Source: On your display device, select the correct HDMI input source to which the RX unit is connected.
  3. Connecteu el transmissor (TX): Plug the Wireless HDMI Transmitter (TX) into the HDMI output port of your source device (e.g., PC, laptop, gaming console, camera). The TX unit can often draw power directly from the HDMI port. If additional power is needed, connect a USB-C power cord to the TX unit and a USB power source.
Diagram showing the plug and play connection of the VENTION Wireless HDMI system.

Figure 3.1: Basic plug-and-play connection setup.

Step-by-step guide for connecting the HDMI receiver and transmitter.

Figure 3.2: Detailed connection steps for TX and RX units.

3.2 Using Adapters

The kit includes various adapters to ensure compatibility with different HDMI port types:

  • Micro HDMI to HDMI: For devices with Micro HDMI output.
  • Mini HDMI to HDMI: For devices with Mini HDMI output.
  • USB-C to HDMI: For devices with USB-C output that support video protocols (e.g., DisplayPort Alt Mode).

Simply attach the appropriate adapter to the TX unit before connecting it to your source device's HDMI port.

Image showing various HDMI adapter types: HDMI, Micro HDMI to HDMI, Mini HDMI to HDMI, and USB-C to HDMI.

Figure 3.3: Included adapters for various HDMI port types.

4. Instruccions de funcionament

4.1 Modes de visualització

The VENTION Wireless HDMI system supports two primary display modes, depending on your source device's capabilities:

  • Mode mirall: Displays the same content on both your source device's screen and the connected display. This is ideal for presentations or sharing content directly.
  • Mode d'ampliació: Extends your desktop across both screens, allowing you to have different content displayed on each. Note: Ensure your computer supports extended mode for this functionality.
Diagram illustrating Mirror mode and Extend mode for dual display setups.

Figure 4.1: Mirror and Extend display modes.

4.2 Multi-Transmitter Operation (Conference Hub)

The system supports connecting multiple transmitters (up to 8) to a single receiver, allowing for seamless switching between different source devices. This is particularly useful in conference or classroom settings.

  • To switch between sources, simply activate the desired transmitter. The receiver will automatically detect and display the active signal.
  • Up to 8 pairs of kits can be used in the same location without interference.
Image showing multiple laptops connected wirelessly to a single display, demonstrating the 1 RX to 8 TXs conference hub feature.

Figure 4.2: Multiple transmitters connected to one receiver for conference use.

4.3 Wireless Transmission Range

The system offers a transmission range of up to 164 feet (50 meters) in open, interference-free environments. When transmitting through walls or floors, the range may be reduced to approximately 32 feet (10 meters).

Diagram illustrating the 164 feet (50 meter) wireless transmission range in an open environment like a cinema.

Figure 4.3: Wireless transmission range in an open environment.

5. Manteniment i cura

  • Mantingueu els dispositius nets i lliures de pols. Feu servir un drap suau i sec per netejar-los.
  • Eviteu exposar els dispositius a temperatures extremes, humitat o llum solar directa.
  • Do not attempt to disassemble or repair the devices yourself. Refer to qualified service personnel for any repairs.
  • Assegureu-vos que hi hagi una ventilació adequada al voltant de les unitats durant el funcionament per evitar el sobreescalfament.
  • Disconnect power when the devices are not in use for extended periods.

6. Solució De Problemes

ProblemaCausa possibleSolució
Cap senyal a la pantalla.
  • Entrada HDMI incorrecta seleccionada a la pantalla.
  • TX or RX unit not powered.
  • Loose HDMI connections.
  • Out of transmission range or excessive interference.
  • El dispositiu font no emet el senyal.
  • Seleccioneu l'entrada HDMI correcta a la pantalla.
  • Ensure both TX and RX units are properly powered (check indicator lights).
  • Verify all HDMI cables and adapters are securely connected.
  • Reduce distance between TX and RX, or remove obstacles.
  • Check source device's display settings.
Poor video quality (flickering, artifacts).
  • Interferència del senyal.
  • Distance too great or obstacles.
  • Source device resolution mismatch.
  • Move away from other wireless devices (e.g., Wi-Fi routers, microwaves).
  • Reduce distance between TX and RX.
  • Ensure source device output resolution is 1080P@60Hz or lower.
Àudio però sense vídeo, o viceversa.
  • Problema amb el cable HDMI.
  • Source device output settings.
  • Prova un altre cable HDMI.
  • Check audio/video output settings on your source device.

7. Especificacions

CaracterísticaDetall
Número de modelADCL0
MarcaVENCIÓ
Tecnologia de transmissió5 GHz sense fils
Resolució màxima1920x1080@60Hz (1080P@60Hz)
Transmission Range (Open Area)Fins a 164 peus (50 m)
Transmission Range (Through Walls)Fins a 32 peus (10 m)
LatènciaMínim
Compatibility (Transmitter)PC, Laptop, Camera, TV Box, Gaming Console, etc.
Compatibility (Receiver)HDTV, Projector, Monitor, etc.
Power Supply (TX)HDMI port powered (optional USB-C)
Power Supply (RX)USB-C port powered
Pes de l'article6.2 unces
ColorBlau
Image showing the VENTION Wireless HDMI Transmitter and Receiver with examples of compatible devices like cameras, TV boxes, PCs, laptops, gaming consoles for the transmitter, and TVs, monitors, projectors for the receiver.

Figure 7.1: Wide compatibility of the VENTION Wireless HDMI system.

8. Garantia i Suport

Per obtenir informació sobre la garantia i assistència tècnica, consulteu la pàgina oficial de VENTION. weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.

Fabricant: VENCIÓ

Weblloc: Visit the VENTION Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.