1. Producte acabatview
The Uniden USB-C to RJ11 Power Cord is designed to provide a reliable power connection for your Uniden radar detector. This cable allows you to power your radar detector using a modern USB-C port, commonly found in newer vehicles, offering a clean and convenient alternative to traditional cigarette lighter adapters or complex hardwire installations.
Figure 1: The Uniden USB-C to RJ11 Power Cord, showing its full length and both connectors.
Característiques principals:
- Compatibilitat USB-C: Designed for newer vehicles equipped with USB-C power ports, eliminating the need for traditional power sources.
- Connexió directa: Provides a direct and stable power connection to your radar detector.
- Instal·lació neta: The 6-foot cable length allows for flexible routing, helping to prevent tangles and offering a tidy setup without a hardwire kit.
- Construcció duradora: Made with high-quality materials for enhanced durability and long-term reliability.
- Official Uniden Product: Ensures compatibility and quality, backed by a one-year warranty.
2. Instruccions de configuració
Follow these steps to connect your Uniden USB-C to RJ11 Power Cord to your radar detector and vehicle.
- Identificació de connectors: Locate the USB-C connector and the RJ11 connector on the power cord. The USB-C connector is reversible and typically smaller, while the RJ11 connector resembles a telephone jack.
- Connect to Radar Detector: Insert the RJ11 end of the power cord into the power input port of your Uniden radar detector. Ensure it clicks securely into place.
- Connect to Vehicle Power: Insert the USB-C end of the power cord into a compatible USB-C power outlet in your vehicle.
- Verifica l'alimentació: Once both ends are connected, your radar detector should power on, indicating a successful connection.
Figura 2: Detall view of the USB-C connector (left) and the RJ11 connector (right) of the power cord.
Figure 3: The RJ11 end of the power cord securely connected to the power input port of a Uniden radar detector.
Figure 4: The USB-C end of the power cord connected to a compatible USB-C power outlet in a vehicle.
3. Funcionament
The Uniden USB-C to RJ11 Power Cord functions as a dedicated power supply for your compatible Uniden radar detector. Once properly connected, it continuously delivers the necessary power for the detector to operate. There are no user-adjustable settings or controls on the power cord itself; its operation is automatic upon connection to a powered USB-C port.
4. Cura i Manteniment
To ensure the longevity and optimal performance of your Uniden USB-C to RJ11 Power Cord, please observe the following care and maintenance guidelines:
- Manejar amb cura: Eviteu doblegar, girar o estirar excessivament el cable, especialment a prop dels connectors, per evitar danys interns.
- Mantenir net: Periodically wipe the cable and connectors with a soft, dry cloth to remove dust and debris. Do not use harsh chemicals or abrasive cleaners.
- Emmagatzema correctament: When not in use, coil the cable loosely to prevent kinks and tangles. Avoid storing it in extreme temperatures or direct sunlight.
- Eviteu l'exposició a l'aigua: This product is designed for indoor vehicle use. Do not expose the cable or connectors to water or excessive moisture.
5. Solució De Problemes
If you encounter issues with your Uniden USB-C to RJ11 Power Cord, refer to the following troubleshooting steps:
| Problema | Causa possible | Solució |
|---|---|---|
| Radar detector does not power on. | Loose connection, vehicle USB-C port not active, or faulty cable/detector. | Ensure both the USB-C and RJ11 connectors are firmly seated. Check if the vehicle's USB-C port is active (e.g., by testing with another device). Test the radar detector with its original power cord if available. |
| Intermittent power to radar detector. | Loose connection, damaged cable, or unstable power from vehicle port. | Check all connections for tightness. Inspect the cable for visible damage (frays, cuts). Try a different USB-C port in the vehicle if available. |
| Cable does not fit into port. | Incorrect port or obstruction. | Verify you are using a USB-C port in the vehicle and an RJ11 port on the radar detector. Check for any debris in the ports. |
6. Especificacions del producte
| Especificació | Detall |
|---|---|
| Marca | Uniden |
| Model | USBCRJ11-2M |
| Connector Type (Input) | USB tipus C |
| Connector Type (Output) | RJ11 |
| Tipus de cable | USB |
| Dispositius compatibles | Uniden Radar Detectors (R8w, R8, R7, R4w, R4, R3, DFR9, DFR8, DFR7 & Additional Models) |
| Característica especial | Tangle Free, High Quality Materials |
| Connector Gènere | Mascle a Mascle |
| Volum màximtage | 12 volts (CC) |
| Usos recomanats | Powering radar detectors in vehicles |
| Color | Negre |
| Pes de l'article | 0.07 quilos |
| Longitud del cable | 6.0 peus |
| UPC | 050633806449 |
7. Garantia i Suport
This Uniden USB-C to RJ11 Power Cord comes with a garantia d'un any des de la data de compra. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.
For warranty claims, technical support, or additional product information, please visit the official Uniden website or contact Uniden customer service.
Podeu trobar més informació i recursos de suport visitant la Uniden Store on Amazon.