Butterfly Xeno Pro 750W Mixer Grinder User Manual

Introducció

Thank you for choosing the Butterfly Xeno Pro 750W Mixer Grinder. This appliance is designed for efficient and versatile kitchen tasks, including wet and dry grinding, juicing, and blending. It features durable Tritan jars, powerful Vortex blades, and a high-performance Torx21 motor to ensure consistent results and long-lasting performance.

Please read this manual carefully before operating the appliance to ensure safe and optimal use. Keep this manual for future reference.

Instruccions importants de seguretat

Quan s'utilitzen aparells elèctrics, sempre s'han de seguir les precaucions bàsiques de seguretat, incloses les següents:

• Llegiu totes les instruccions abans d'utilitzar.
• No submergiu la unitat del motor en aigua o cap altre líquid.
• Assegureu-vos que el voltage indicat a l'electrodomèstic correspon a la vostra xarxa local voltage abans de connectar.
• Desendolleu sempre l'aparell de la presa de corrent quan no l'utilitzeu, abans de muntar o desmuntar peces i abans de netejar-lo.
• Keep hands and utensils out of the jar while blending to reduce the risk of severe injury to persons or damage to the mixer grinder. A scraper may be used but only when the mixer grinder is not running.
• No feu servir cap aparell amb un cable o un endoll danyats, o després que l'aparell funcioni malament o s'hagi caigut o s'hagi danyat de cap manera.
• The appliance is equipped with an overload protection mechanism. If the motor stops due to overload, switch off the appliance, unplug it, and allow it to cool down before restarting.
• No utilitzar a l'aire lliure.
• És necessària una supervisió estreta quan qualsevol aparell és utilitzat per o a prop dels nens.
• Les fulles són afilades. Manipular amb cura.

Producte acabatview

The Butterfly Xeno Pro 750W Mixer Grinder includes the main motor unit and four unbreakable Eastman Tritan jars with corresponding lids and Vortex blades.

Image: The Butterfly Xeno Pro 750W Mixer Grinder with its main unit and four Tritan jars.

Components clau:

• Unitat motora: The base unit housing the 750W Torx21 motor.
• Tritan Jars (4): Made from BPA-free, impact-resistant Eastman Tritan material.
• Vortex Blades: Stainless steel blades designed for efficient grinding and blending.
• Tapes: Secure lids for each jar to prevent spillage during operation.
• Botó de control de velocitat: For selecting desired speed and pulse function.

Image: Visual representation of key features such as the Torx21 motor, Vortex blades, 360° secure jar lock, Tritan TX1001 jars, NSF certification, and warranty information.

Configuració

1. Desembalar: Traieu amb cura tots els components de l'embalatge. Conserveu l'embalatge per a futurs emmagatzematges o transports.
2. Neteja: Before first use, wash all jars, lids, and blades with warm soapy water. Rinse thoroughly and dry. Wipe the motor unit with a damp tela.
3. Col·locació: Place the motor unit on a clean, dry, and stable surface, away from the edge of the countertop. Ensure there is adequate ventilation around the unit.
4. Muntar el pot: Ensure the blade assembly is securely fitted into the jar. Place the ingredients into the appropriate jar. Do not overfill.
5. Tapa segura: Col·loqueu la tapa fermament al pot.
6. Attach Jar to Motor Unit: Place the assembled jar onto the motor unit. Rotate the jar clockwise until it locks securely into place. The 360° secure jar lock ensures proper placement before operation.
7. Connectar l'alimentació: Connecteu el cable d'alimentació a una presa de corrent adequada.

Instruccions de funcionament

The Butterfly Xeno Pro features a knob control with 3-speed settings and a pulse function for precise control over your grinding and blending tasks.

1. Preparar els ingredients: Cut ingredients into smaller pieces if necessary to facilitate grinding.
2. Load Jar: Place the prepared ingredients into the chosen jar. Ensure the quantity does not exceed the maximum fill line.
3. Secure Jar: Place the lid on the jar and ensure it is properly sealed. Mount the jar onto the motor unit and twist clockwise until it locks.
4. Seleccioneu la velocitat: Turn the control knob to the desired speed setting (1, 2, or 3). For short bursts of power, use the 'Pulse' function by turning the knob to 'P' and holding it briefly.
5. Funciona: Allow the mixer grinder to run until the desired consistency is achieved. Avoid continuous operation for extended periods. Allow the motor to rest between cycles.
6. Apagar: Once done, turn the control knob to the 'OFF' position. Unplug the appliance from the power outlet.
7. Treure el pot: Twist the jar counter-clockwise to unlock and lift it from the motor unit. Carefully remove the lid and pour out the contents.

Directrius d'ús:

Image: Guide illustrating recommended wattage for various grinding tasks (e.g., dips, chutneys, purees, smoothies for less than 750W; dry masala, ginger, coconut, rice & lentils for more than 750W). Also shows typical operating noise levels.

• For regular grinding tasks like dips, chutneys, purees, and smoothies, lower speeds or shorter durations may be sufficient.
• For tough grinding tasks such as dry masala, ginger, coconut, or rice and lentil batters, use higher speeds and ensure the ingredients are properly prepared.
• The appliance operates within 80-90 dB noise levels, which is comparable to a hair dryer.

Manteniment i Neteja

Regular cleaning and maintenance will prolong the life of your Butterfly Xeno Pro Mixer Grinder.

1. Desconnectar: Always ensure the appliance is unplugged from the power outlet before cleaning.
2. Clean Jars and Lids: The Tritan jars and lids are dishwasher safe. Alternatively, wash them with warm soapy water using a soft brush or sponge. Rinse thoroughly and dry immediately to prevent water spots.
3. Fulles netes: Handle blades with extreme care due to their sharpness. Clean them under running water, using a brush if necessary to remove food particles.
4. Unitat motora neta: Netegeu l'exterior de la unitat motora amb un drap suau iamp drap. No utilitzeu productes de neteja abrasius ni submergiu la unitat del motor en aigua.
5. Emmagatzematge: Store the mixer grinder and its accessories in a clean, dry place when not in use.

Resolució de problemes

If you encounter any issues with your mixer grinder, refer to the following common problems and solutions:

Especificacions

Informació de la garantia

The Butterfly Xeno Pro 750W Mixer Grinder comes with the following warranty coverage:

• Garantia del producte: 2 anys a partir de la data de compra.
• Garantia del motor: 5 anys a partir de la data de compra.

Please refer to the warranty card included with your product for detailed terms and conditions. Keep your purchase receipt as proof of purchase for warranty claims.

Image: Product packaging indicating warranty information.

Atenció al client

For any assistance, queries, or service requests, please contact Butterfly customer support:

• Telèfon: +91 9362 01 9362 (9 AM - 6 PM, Monday - Saturday)
• Correu electrònic: service@butterflyindia.com
• WhatsApp: 24/7 Support available via WhatsApp (refer to QR code for details).
• Weblloc: Visit the official service page for more information: www.butterflyindia.com/service

Image: Customer support details including phone number, email, website, and a QR code for product warranty registration and user manual access.

As part of our eco-friendly initiative, a physical user manual and warranty card may not be included with the product. Please use the provided QR code or website for digital access and warranty registration.